FLEX FX0421-Z

FLEX 24V 280W Lithium-Ion Battery Rapid Charger

Model: FX0421-Z

Увод

Thank you for choosing the FLEX 24V 280W Lithium-Ion Battery Rapid Charger. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your charger. Designed for speed and durability, this charger ensures your FLEX 24V batteries are ready when you are, minimizing downtime with its advanced charging technology and dual fan cooling system.

Безбедносне информације

УПОЗОРЕЊЕ: Прочитајте сва безбедносна упозорења и сва упутства пре употребе овог производа. Непоштовање упозорења и упутстава може довести до струјног удара, пожара и/или озбиљних повреда.

  • Не излажите пуњач киши или влажним условима. Вода која улази у пуњач батерије повећаће ризик од струјног удара.
  • Use only with specified FLEX 24V Lithium-Ion battery packs. Charging other battery packs may cause them to burst, leading to personal injury and damage.
  • Do not charge damaged battery packs. If a battery pack is damaged, it must be replaced.
  • Keep the charger away from heat sources, such as radiators, heat registers, stoves, or other apparatus (including ampлифиерс) који производе топлоту.
  • Искључите пуњач из утичнице када га не користите или пре чишћења.
  • Do not operate the charger with a damaged cord or plug. If damaged, have it repaired by a qualified service person.
  • Немојте растављати пуњач. Однесите га квалификованом сервисеру када је потребан сервис или поправка. Неправилно поновно састављање може довести до опасности од струјног удара или пожара.

Производ је завршенview

The FLEX 24V 280W Rapid Charger (FX0421-Z) is engineered for efficient and fast charging of your FLEX 24V batteries. Its robust design includes intelligent processing and dual fan cooling to optimize charging performance and battery longevity.

FLEX 24V 280W Rapid Charger

Слика 1: Одозго надоле view of the FLEX 24V 280W Rapid Charger, showing the battery slot and indicator lights.

FLEX 24V 280W Rapid Charger with indicator lights

Слика 2: Под углом view of the FLEX 24V 280W Rapid Charger, highlighting the indicator panel.

Internal components of FLEX charger showing dual fan technology

Figure 3: Diagram illustrating the internal components of the FLEX charger, emphasizing the dual fan cooling system for faster charging.

FLEX battery technology features

Figure 4: Visual representation of FLEX battery technology, highlighting Therma-Tech™ Heat Management, Power IQ, and resistance to drop, dust, and water.

Кључне карактеристике:

  • 280W Rapid Charging: Delivers fast charging speeds for minimal downtime.
  • Dual Fan Technology: Actively cools the charger and battery during operation to prevent overheating and extend lifespan.
  • Smart Charge Gauge: Clear indicator lights show charging status (Full Charge, 80% Charge, Charging, High Temp/Error).
  • Battery Lock System: Ensures secure connection and prevents accidental disconnection.
  • Може се монтирати на зид: Designed for convenient storage and accessibility.
  • FLEX 24V Cross-Compatibility: Works seamlessly with all FLEX 24V batteries and tools.

Сетуп

  1. Распакујте пуњач: Carefully remove the charger and any packaging materials from the box. Inspect for any damage.
  2. Пласман: Place the charger on a stable, flat, and dry surface. Ensure adequate ventilation around the charger. The charger can also be wall-mounted using appropriate fasteners (not included) through the designated mounting holes on the back.
  3. Повежите се са напајањем: Plug the charger's power cord into a standard 120V AC electrical outlet. The indicator lights may briefly illuminate upon connection.

Упутство за употребу

Пуњење батерије:

  1. Уверите се да је пуњач прикључен у активну утичницу.
  2. Align the FLEX 24V battery pack with the charging slot on the charger.
  3. Slide the battery pack firmly into the slot until it clicks securely into place. The battery lock system will engage.
  4. The charger's indicator lights will illuminate to show the charging status. The cooling fans may activate during charging.
  5. Once charging is complete, the 'Full Charge' indicator will light up.
  6. To remove the battery, press the release tabs on the sides of the battery pack and slide it out of the charger.

Индикаторска светла за пуњење:

Индикатор Статус
Зелена (чврста) Фулл Цхарге
Зелена (трепери) 80% пуњење
Green (Scrolling) Пуњење
Црвена (пуна) High Temperature / Error

Приближно време пуњења:

FLEX 280W Rapid Charger approximate charging times

Figure 5: Table showing approximate charging times for various FLEX 24V Lithium-Ion batteries.

  • 24V 2.5Ah Lithium: Approximately 30 Minutes
  • 24V 5.0Ah Lithium: Approximately 30 Minutes
  • 24V 8.0Ah Lithium: Approximately 50 Minutes
  • 24V 12.0Ah Lithium: Approximately 75 Minutes

*Charging times may vary based on battery condition, ambient temperature, and power source.

Компатибилност производа:

FLEX 24V tools and batteries cross-compatibility

Figure 6: An array of FLEX 24V tools and batteries, demonstrating their 100% cross-compatibility.

The FLEX 24V 280W Rapid Charger is designed to be 100% cross-compatible with all FLEX 24V batteries, chargers, and tools, ensuring a versatile and efficient power system for your projects.

Одржавање

  • Чишћење: Disconnect the charger from the power supply before cleaning. Use a soft, damp cloth to wipe down the exterior of the charger. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic components.
  • Складиштење: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure the charger is unplugged when not in use for extended periods.
  • инспекција: Periodically inspect the power cord and charger housing for any signs of damage. If any damage is found, do not use the charger and contact FLEX customer support for assistance.

Решавање проблема

Проблем Могући узрок Решење
Пуњач се не укључује No power to the outlet; Damaged power cord/plug Check if the outlet is live by plugging in another device. Inspect the power cord and plug for damage.
Battery not charging (no indicator lights) Battery not properly seated; Battery is too hot/cold; Battery is damaged Ensure the battery is fully inserted and clicks into place. Allow battery to reach room temperature (40°F - 104°F / 4°C - 40°C). If battery is damaged, replace it.
Red (Solid) indicator light High temperature or other error Remove the battery and allow both the battery and charger to cool down in a well-ventilated area. Reinsert the battery. If the error persists, contact customer support.

Спецификације

  • Број модела: ФКС0421-З
  • Димензије производа: 7.3 к 7.6 к 3.7 инча (18.5 к 19.3 к 9.4 цм)
  • Тежина артикла: 2.33 фунте (1.06 кг)
  • Оутпут Волtage: 24 Волтс
  • Излазна снага: 280В
  • Боја: Сива/Црна
  • Усклађеност: Сертификат Енерги Стар

Гаранција и подршка

FLEX Limited Lifetime Warranty: Register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2025, at registermyFLEX.com to receive a limited lifetime warranty. Please refer to the official FLEX webсајт за пуне услове гаранције.

Корисничка подршка: For technical assistance, service, or replacement parts, please visit the official FLEX website or contact their customer service department. Always provide your product model number (FX0421-Z) when seeking support.

Званични видео снимци производа

No official product videos from the seller are available for this specific model at this time.

© 2024 FLEX. All rights reserved.