ATTACK SHARK X3PRO 4K/8K лаган бежични гејмерски миш - упутство за употребу

1. Производ је готовview

The ATTACK SHARK X3PRO is a high-performance lightweight wireless gaming mouse designed for precision and responsiveness. It features a Pixart PAW3395 optical sensor, Kailh GM8.0 switches, and offers tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.2).

2. Садржај пакета

• ATTACK SHARK X3PRO Wireless Gaming Mouse
• УСБ-Ц на УСБ-А кабл за пуњење
• 2.4G USB Receiver (located on the bottom of the mouse)
• Type-C to USB-A Adapter
• Упутство за употребу

3. Упутства за подешавање

3.1 Identifying Mouse Components

Familiarize yourself with the mouse components:

• Дугме ДПИ: Located on the bottom, used to cycle through DPI settings.
• Дугме за пребацивање режима: Located on the bottom, allows switching between 2.4G, OFF, and BT modes.
• Индикаторска лампица режима: Provides visual feedback on the current connection mode and battery status.
• УСБ пријемник: Stored in a compartment on the bottom of the mouse. Open the cover to access it.
• Флексибилни паракорд кабл: За жично повезивање и пуњење.
• Type-C to USB-A Adapter: For connecting the USB-C cable to a standard USB-A port.

3.2 Повезивање миша

The X3PRO supports three connection modes:

3.2.1 Бежични режим од 2.4 GHz

1. Locate the USB receiver on the bottom of the mouse by opening its cover.
2. Уметните 2.4G USB пријемник у слободан USB порт на рачунару.
3. Slide the mode switch on the bottom of the mouse to the '2.4G' position. The mode indicator light will illuminate.
4. Миш би требало аутоматски да се повеже са рачунаром.

3.2.2 Режим Bluetooth 5.2

1. Slide the mode switch on the bottom of the mouse to the 'BT' position. The mode indicator light will flash, indicating pairing mode.
2. На рачунару отворите подешавања за Bluetooth и потражите нове уређаје.
3. Select 'ATTACK SHARK X3PRO' from the list of available devices to pair.
4. The mode indicator light will become solid once connected. The mouse supports connecting up to 4 devices simultaneously via Bluetooth.

3.2.3 Жични режим

1. Connect the USB-C end of the charging cable to the front port of the mouse.
2. Connect the USB-A end of the cable (or via the Type-C to USB-A adapter) to your computer's USB port.
3. Slide the mode switch on the bottom of the mouse to the 'OFF' position. The mouse will operate in wired mode and charge simultaneously.

3.3 Driver Installation (Optional)

For full customization of the 5 programmable buttons, DPI settings, polling rate, LOD, and macros, download and install the official ATTACK SHARK X3PRO driver software from the manufacturer's website. The 8K wired and 4K wireless modes are plug-and-play for basic functionality.

4. Упутство за употребу

4.1 ДПИ подешавање

The mouse features 6 adjustable DPI levels. Press the DPI button on the bottom of the mouse to cycle through the preset DPI settings (800/1600/2400/3200/5000/26000). The mode indicator light may change color or flash to indicate the current DPI level, depending on the driver settings.

4.2 Стопа анкетирања

The X3PRO supports a wireless polling rate of up to 4000Hz and a wired polling rate of up to 8000Hz. A higher polling rate reduces input delay, providing a more responsive experience.

Polling Rate Requirement: For optimal 4K/8K polling rate performance, an Intel Core i5 or higher CPU / AMD Ryzen 5 or higher CPU and a USB 3.0 or higher port are recommended.

4.3 Управљање батеријом

The X3PRO mouse can provide up to 68 hours of continuous game time on a full charge. When the battery is low, the mode indicator light will typically flash red. Connect the mouse using the USB-C cable to charge it. The mouse can be used in wired mode while charging.

5. Одржавање

5.1 Чишћење

Да бисте одржали оптималне перформансе, редовно чистите миш. Користите меку, суву крпу за брисање површине. За тврдокорну прљавштину, благо дamp Може се користити крпа, водећи рачуна да влага не уђе у унутрашње компоненте. Избегавајте јаке хемикалије или абразивне материјале.

5.2 ПТФЕ стопала

The mouse is equipped with 100% virgin grade PTFE feet for a consistent glide. Keep the feet clean and free of debris to ensure smooth movement. If the feet become worn, replacement feet can be purchased from authorized retailers.

КСНУМКС. Решавање проблема

• Миш не реагује:
  Ensure the mouse is charged. Check the mode switch on the bottom of the mouse to confirm it is set to the correct connection mode (2.4G, BT, or OFF for wired). For 2.4G, ensure the USB receiver is securely plugged in. For Bluetooth, verify pairing in your computer's settings. For wired mode, ensure the USB-C cable is properly connected.
• 2.4GHz Wireless Dongle Missing:
  The 2.4G USB receiver is located in a compartment on the bottom of the mouse. Open the small cover to access it. If it is genuinely missing from the package, contact customer support.
• DPI or Polling Rate issues:
  Ensure the mouse driver software is installed for advanced settings. Verify your computer meets the minimum requirements for 4K/8K polling rates (Intel Core i5/AMD Ryzen 5 or higher CPU, USB 3.0 port).
• Дугмад не раде како се очекује:
  If you have customized button functions, ensure the driver software is running and the settings are correctly applied. Reset the mouse to factory defaults via the software if necessary.
• Повремена веза:
  Move the mouse closer to the receiver/computer. Avoid sources of interference (e.g., other wireless devices, large metal objects). Ensure the mouse is fully charged.

7. Спецификације

8. Званични видео производа

9. Гаранција и подршка

For warranty information and technical support, please refer to the documentation included with your product or visit the official ATTACK SHARK webсајт. Сачувајте доказ о куповини за потребе гаранције.