1. Увод
The jojofuny Water Tank Level Gauge is an advanced ultrasonic sensor system designed to monitor the liquid level and temperature of your outdoor water tank from the comfort of your indoor living space. This device provides real-time data, including water level displayed on a 10-bar graph, indoor temperature, and tank temperature, along with time display and alarm functions.
Садржај пакета:
- 1 x Liquid Level Meter (Receiver Display Unit)
- 1 x Ultrasonic Sensor Transmitter Unit
- Напомена: Батерије нису укључене и морају се купити засебно.
2. Безбедносне информације
Please read and understand all safety instructions before operating this device. Failure to follow these instructions may result in damage to the product or personal injury.
- Не излажите уређај екстремним температурама, директној сунчевој светлости или прекомерној влази.
- Не покушавајте да растављате или модификујете уређај. Унутра нема делова које корисник може сам да поправи.
- Use only the specified battery type (AAA for the receiver unit). Ensure correct polarity when inserting batteries.
- Држите уређај ван домашаја деце.
- Старе батерије одлажите одговорно у складу са локалним прописима.
- Ensure the ultrasonic sensor transmitter unit is securely installed on the water tank to prevent accidental submersion or damage.
3. Компоненте производа
3.1 Receiver Display Unit
This unit displays all the information from the sensor, including water level, temperatures, and time. It features a clear LCD screen and control buttons.
Слика 3.1: Предња страна view of the Receiver Display Unit.
Слика 3.2: Позади view of the Receiver Display Unit, highlighting wall-mounting options.
Figure 3.3: Receiver Display Unit with kickstand extended for standing.
3.2 Ultrasonic Sensor Transmitter Unit
This unit is installed on top of your water tank. It uses ultrasonic technology to measure the water level and temperature within the tank and wirelessly transmits this data to the receiver display unit.
Figure 3.4: Ultrasonic Sensor Transmitter Unit.
Figure 3.5: Receiver Display Unit and Transmitter Unit.
4. Подешавање
4.1 Receiver Display Unit Setup
- Инсталирајте батерије: Open the battery compartment cover on the back of the receiver unit. Insert 3 x AAA batteries (not included), ensuring correct polarity (+/-). Close the battery cover securely.
Figure 4.1: Battery installation in the Receiver Display Unit.
- Пласман: You can place the receiver unit in one of two ways:
- Zidni nosač: Use the integrated hooks on the back of the unit to hang it on a wall.
- стојећи: Pull out the integrated stand on the back of the unit to place it on a flat surface such as a kitchen benchtop, table, or desk.
4.2 Ultrasonic Sensor Transmitter Unit Installation
- Локација монтаже: Install the transmitter unit at the top of your water tank. Ensure the ultrasonic sensor faces downwards towards the water surface.
- ваздушни јаз: Maintain a minimum air gap of 0.5 meters (1.64 feet) between the sensor and the maximum water level. This ensures accurate readings.
- Сигурна инсталација: Ensure the transmitter unit is securely fastened to prevent it from falling into the tank or being dislodged by wind or other environmental factors.
- Прво упаривање: Once both units are powered on and within range (up to 100m in open field), they should automatically establish a connection. The receiver unit will begin displaying tank level and temperature data.
5. Упутство за употребу
5.1 Разумевање екрана
The LCD screen provides comprehensive information at a glance. Refer to the diagram below for a detailed explanation of each display segment.
Figure 5.1: LCD Display Overview.
| бр. | Опис |
|---|---|
| 1. | Value display area (for tank level/depth) |
| 2. | Tank temperature and water level icon |
| 3. | Water level unit (Meters/Feet) |
| 4. | Tank temperature unit (°C/°F) |
| 5. | Outdoor low battery indicator (for transmitter unit) |
| 6. | Alarm activation icon |
| 7. | Min. and max. record indicator |
| 8. | Empty alert icon |
| 9. | Индикатор РФ сигнала |
| 10. | Tank level high and low alarm indicator |
| 11. | Water tank depth icon (10-bar graph) |
| 12. | Индикатор временског аларма |
| 13. | Time and alarm value display area |
| 14. | Indoor temperature value display area |
| 15. | Indoor temperature unit (°C/°F) |
5.2 Контролна дугмад
The receiver unit has four control buttons:
- КОМПЛЕТ: Used to enter settings mode and confirm selections.
- +/MAX/MIN: Used to increase values, view maximum records, or view minimum records.
- -/TANK: Used to decrease values or switch between tank level display modes/units.
- АЛАРМНИ: Used to set or activate/deactivate alarms.
5.3 Основни рад
- Viewинг Дата: The display automatically updates tank level and temperature data every 30 seconds or 3 minutes.
- Промена јединица температуре: Притисните тастер СЕТ button to cycle between Celsius (°C) and Fahrenheit (°F) for both indoor and tank temperatures.
- Viewing Min/Max Records: Притисните тастер +/MAX/MIN button to cycle through minimum and maximum recorded indoor and tank temperatures.
- Време подешавања:
- Притисните и држите СЕТ дугме док дисплеј времена не почне да трепери.
- Користите +/MAX/MIN и -/TANK да подесите сат и минут.
- Притисните СЕТ да бисте потврдили свако подешавање.
- You can also switch between 12-hour and 24-hour formats.
- Setting Tank Level Alarms (High/Low/Empty):
- Притисните тастер АЛАРМ дугме за улазак у режим подешавања аларма.
- Користите +/MAX/MIN и -/TANK to set the desired high or low water level alarm thresholds.
- You can also set an "empty tank" alert.
- Притисните АЛАРМ again to activate or deactivate the set alarms. The alarm activation icon (6) will appear when active.
6. Одржавање
- Чишћење: Wipe the receiver display unit and the exterior of the transmitter unit with a soft, damp тканина. Немојте користити абразивна средства за чишћење или раствараче.
- Замена батерије: When the low battery indicator appears on the display (for either indoor or outdoor unit), replace the batteries promptly. For the receiver unit, follow the steps in Section 4.1. For the transmitter unit, refer to its specific battery compartment (usually located on the top or side).
- Провера сензора: Periodically inspect the ultrasonic sensor on the transmitter unit for any debris or obstructions that might affect its accuracy.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| No display on receiver unit. | Батерије су истрошене или неправилно постављене. | Замените батерије, водећи рачуна о исправном поларитету. |
| No tank level reading / "---" displayed. |
|
|
| Inaccurate water level readings. |
|
|
| Аларм се не оглашава. | Аларм није активиран или је погрешно подешен. | Review Section 5.3 on setting and activating alarms. |
8. Спецификације
| Феатуре | Детаљ |
|---|---|
| Број модела | C233218T8XY99YQPZP5X |
| Материјал | Пластика |
| Receiver Unit Dimensions (L x W x H) | 10.5 x 9.3 x 2.5 цм (приближно 4.13 x 3.66 x 0.98 инча) |
| Тежина артикла | 8 унци |
| Water Level Range | 0.5 м до 15 м (1.64 стопа до 49.2 стопа) |
| Air Gap (Min.) | КСНУМКСм (КСНУМКС фт) |
| Распон преноса | Up to 100m (328 ft) in open field |
| Дисплеј температуре | Indoor and Tank Temperature (°C/°F) |
| Приказ времена | Формат 12/24 сата |
| Учесталост ажурирања података | Every 30 seconds or 3 minutes |
| Извор напајања (пријемник) | Batteries (Not Included) - 3 x AAA recommended based on image |
| Тип монтаже | Wall Mount, Standing |
9. Информације о гаранцији
According to the product specifications, this product is sold without a manufacturer's warranty. Please refer to the retailer's return policy for any issues or concerns regarding your purchase.
10. Корисничка подршка
For any questions, technical assistance, or issues not covered in this manual, please contact the seller or the manufacturer, jojofuny, through the platform where you purchased the product. Please have your model number (C233218T8XY99YQPZP5X) and purchase details ready when contacting support.