Phanteks XT View Mid-Tower Gaming Chassis Instruction Manual

1. Увод

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Кључне карактеристике:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Садржај пакета

Проверите да ли су све компоненте присутне у пакету:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Зип кравате (30к)
  • MB/SSD Screws (30x)
  • Шрафови (4к)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Подешавање и инсталација

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View шасија.

3.1. Припрема шасије

1. Raspakujte: Пажљиво извадите кућиште из паковања.
2. Уклоните панеле: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Слика 3.1: Унутрашњост view of the XT View chassis, ready for component installation.

3.2. Инсталација матичне плоче

1. Инсталирајте Стандоффс: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Place Motherboard: Пажљиво поравнајте матичну плочу са одстојницима и отвором заштите за И/О.
3. Безбедна матична плоча: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Инсталација јединице за напајање (PSU)

1. Позиција ПСУ: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Безбедно напајање: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Инсталација уређаја за складиштење података

The chassis supports 3.5" HDDs and 2.5" SSDs.

• 3.5" HDD: Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• 2.5" SSD: Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Причврстите погоне одговарајућим завртњима.

3.5. Инсталација картице за проширење (GPU)

1. Уклоните поклопце слотова: Уклоните потребне поклопце слотова за проширење са задње стране кућишта.
2. Уметните картицу: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Безбедна картица: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Image 3.2: Rear interior view highlighting expansion slots and fan mounting points.

3.6. Уградња вентилатора и радијатора

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Top: Up to 360mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Менаџмент каблова

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Слика 3.3: Позади view illustrating cable management space.

3.8. Предње И/О везе

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• УСБ 3.0 заглавље
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Упутство за употребу

4.1. Укључивање/искључивање

Притисните тастер Дугме за напајање located on the top front panel to turn the system on or off.

4.2. Повезивање предњег панела

The front I/O panel provides convenient access to:

• 1к УСБ 3.0 порт
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Одржавање

5.1. Чишћење филтера за прашину

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Уклони филтере: Gently slide out or unclip the dust filters.
2. чисто: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Поново инсталирај: Place the clean, dry filters back into their positions.

5.2. Генерално чишћење

За спољашње површине користите меку,amp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи.

6.1. Систем се не укључује

• Прикључци за напајање: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Повезивање матичне плоче: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Front Panel Header: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Синхронизација матичне плоче: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Функционалност дугмета: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Везе: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Препреке: Check for any cables or objects obstructing fan blades.
• прашина: Clean any dust buildup on fan blades.

7. Спецификације

8. Подршка и гаранција

For additional information, technical support, or warranty inquiries, please visit the official Phanteks webсајт:

ввв.пхантекс.цом

Refer to the Phanteks webсајт за најновије гарантне одредбе и услове који важе за ваш регион.