Увод
The VOLTCRAFT PTM-200 is a highly versatile plug-in thermometer designed for precise temperature measurements across a wide range. It is ideal for use in liquids, gases, and for determining core temperatures in various professional and domestic settings, including quality control, laboratory work, and culinary applications.
This device offers a measurement range from -200 °Ц до +200 °Ц with a high resolution of 0.1 °Ц. Key features include a clear display with white backlight, a robust Pt1000 сензор, и ИП65 водоотпорност, ensuring durability and reliability. The integrated Max/Min function allows for tracking temperature extremes during a measurement period. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your PTM-200 thermometer.
Садржај пакета
- VOLTCRAFT PTM-200 Thermometer Unit
- Pt1000 Measurement Sensor (3.5 mm diameter)
- 9В Батерија
- Упутство за употребу
Безбедносна упутства
- Пажљиво прочитајте ово упутство пре прве употребе.
- Не излажите уређај екстремним температурама или директној сунчевој светлости током дужег периода.
- Ensure the battery compartment is securely closed to maintain IP65 water resistance.
- Handle the sensor probe with care to avoid injury or damage.
- Држите уређај ван домашаја деце.
- Не покушавајте да модификујете или растављате уређај.
Сетуп
- Инсталација батерије:
Locate the battery compartment on the back of the thermometer unit. Open the compartment cover. Insert the supplied 9V battery, ensuring correct polarity (+/-). Close the battery compartment cover securely to maintain the device's water resistance.
Image: The VOLTCRAFT PTM-200 thermometer unit, showing the main display, control buttons, the connected Pt1000 sensor probe, and a 9V battery. This illustrates the components included and ready for setup.
- Веза сензора:
Connect the Pt1000 measurement sensor cable to the designated port on the top of the thermometer unit. Ensure the connection is firm and secure.
- Почетно укључивање:
Press the red power button to turn on the device. The display should illuminate, and a temperature reading will appear.
Упутство за употребу
- Укључивање/искључивање:
Притисните црвено дугме за напајање (
) to turn the thermometer on. Press and hold the same button for a few seconds to turn it off. - Мерења:
Insert the Pt1000 sensor probe into the substance or area where you wish to measure the temperature. Allow a few moments for the reading to stabilize on the display. The white backlight ensures clear visibility in various lighting conditions.
Image: The VOLTCRAFT PTM-200 thermometer with its display showing a temperature reading of 23.4 °C. The Pt1000 sensor is attached and ready for use, demonstrating the device in operation.
- Функција макс./мин.
Press the "MAX/MIN" button to cycle through the maximum recorded temperature, minimum recorded temperature, and current temperature. This function is useful for monitoring temperature fluctuations over time.
- Контрола позадинског осветљења:
Притисните дугме за сијалицу (
) to activate or deactivate the white backlight for the display. - Отпорност на воду (IP65):
The device is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it may be exposed to splashes. However, it is not designed for immersion in water.
Одржавање
- Чишћење:
Wipe the thermometer unit and sensor probe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Ensure the sensor is clean before and after each use for accurate readings.
- Замена батерије:
When the battery warning indicator appears on the display, replace the 9V battery as described in the "Setup" section. Always dispose of used batteries responsibly.
- Складиштење:
Store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures. Disconnect the sensor probe if storing for extended periods.
Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Уређај се не укључује. | Батерија је испражњена или неправилно инсталирана. | Проверите поларитет батерије или замените 9V батерију. |
| Нетачна очитавања температуре. | Sensor probe is dirty or damaged; improper contact with substance. | Clean the sensor probe. Ensure the probe is fully immersed or making good contact. Check for visible damage to the sensor or cable. |
| Екран је слаб или трепери. | Ниска батерија. | Замените 9В батерију. |
| Порука „Грешка“ на екрану. | Sensor error or out of measurement range. | Ensure the sensor is properly connected. Check if the temperature is within the -200 °C to +200 °C range. If the problem persists, the sensor may be faulty. |
Ако наиђете на проблеме који нису наведени овде или ако решења не реше проблем, обратите се корисничкој подршци.
Спецификације
| Модел: | PTM-200 (VC-12920030) |
| Опсег мерења: | -200 °Ц до +200 °Ц |
| Резолуција: | 0.1 °Ц |
| Тип сензора: | Пт1000 |
| Приказ: | ЛЦД са белим позадинским осветљењем |
| Класа заштите: | IP65 (Dust tight and protected against low-pressure water jets) |
| Напајање: | 9В батерија |
| Димензије (Д к Ш к В): | 7.3 к 3 к 12.1 цм |
| Тежина: | 208.5 г |
| Произвођач: | ВОЛТЦРАФТ |
| Прво доступно: | 25. јануара 2024 |
Гаранција
The VOLTCRAFT PTM-200 thermometer comes with a warranty period of a minimum of 2 године from the date of purchase. This warranty covers manufacturing defects and ensures that your product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.
Подршка
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the VOLTCRAFT customer support. Refer to the contact information provided with your purchase or visit the official VOLTCRAFT webсајт за детаље подршке.