Phanteks XT Pro Mid-Tower Gaming Chassis User Manual

1. Увод

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing its sleek black design and tempered glass side panel.

2. Безбедносне информације

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Обезбедите правилно уземљење како бисте спречили оштећење осетљивих електронских компоненти услед електростатичког пражњења (ESD).
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Садржај пакета

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Кутија са додатном опремом (шрафови, везице, одстојници итд.)
• Кориснички приручник (овај документ)
• (Optional, depending on model) 1x 120mm Fan

4. Подешавање и инсталација

4.1 Припрема шасије

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

Слика 4.1: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

Слика 4.2: Задњи ентеријер view of the chassis, showing cable management routes and drive mounting locations.

4.2 Инсталација матичне плоче

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

Слика 4.3: Унутрашњост view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Инсталација јединице за напајање (ПСУ).

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Инсталација уређаја за складиштење података

The XT Pro supports multiple storage drives.

• 3.5" HDD-ови: Инсталирајте у кућиште уређаја које се налази испод кућишта напајања.
• 2.5" SSD дискови: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 Инсталација графичке картице (GPU)

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Уградња вентилатора и радијатора

The XT Pro offers extensive cooling support:

• Фронт: Up to 3x 120mm or 2x 140mm fans.
• Врх: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• позади: 1x 120 мм вентилатор.
• дно: Up to 2x 120mm fans.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Управљање кабловима

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Руковање шасијом

5.1 Предња У/И плоча

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Дугме за напајање: Укључује/искључује систем.
• Дугме за ресетовање: Поново покреће систем.
• УСБ 3.0 портови: За пренос података великом брзином.
• УСБ-Ц 3.0 порт: For modern USB-C devices.
• Аудио прикључци: Прикључци за слушалице и микрофон.

Слика 5.1: Крупни план view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Одржавање

Редовно одржавање помаже у обезбеђивању оптималних перформанси и дугог века трајања компоненти вашег рачунара.

• Филтери за прашину: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Спољно чишћење: Обришите спољашње површине меком, дamp крпу. Избегавајте абразивна средства за чишћење или раствараче.
• Унутрашње чишћење: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи.

• Систем се не укључује:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Ensure the PSU switch is in the "ON" position.
• Нема излаза на екран:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • Поново инсталирајте графичку картицу и РАМ модуле.
• Прекомерна бука:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Слаб проток ваздуха/високе температуре:
  • Очистите све филтере за прашину и унутрашње компоненте.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support webсајту или контактирајте њихову корисничку службу.

8. Спецификације

Слика 8.1: Димензионално прекоview of the Phanteks XT Pro chassis.

9. Гаранција и подршка

Phanteks products come with a limited warranty. Please refer to the official Phanteks website for the most up-to-date warranty information and terms specific to your region.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.