HIFI WALKER T10 Air

HIFI WALKER T10 Air Magnetic Charging Cable User Manual

Model: T10 Air

1. Увод

This manual provides essential instructions for the proper use and maintenance of your HIFI WALKER T10 Air Magnetic Charging Cable. Please read this guide thoroughly before using the product to ensure optimal performance and longevity.

2. Производ је готовview

2.1 Шта је у кутији

  • 2 x HIFI WALKER T10 Air Magnetic Charging Cables

2.2 Кључне карактеристике

  • Магнетни додатак: Ensures a secure and reliable connection for charging.
  • 4-Pin Interface: Specifically designed for compatibility with HIFI WALKER T10 Air Bone Conduction Headphones.
  • УСБ повезивање: Standard USB-A connector for broad compatibility with power sources.
  • Durable TPE Cable: Constructed with Thermoplastic Elastomer (TPE) for flexibility and durability.
  • Оптимална дужина: Approximately 2 feet (62.5 cm) for convenient use.
Diagram showing magnetic attachment of the charging cable to headphones

Image 1: Magnetic attachment mechanism for the charging cable. The diagram illustrates how the magnetic pins align with the headphone's charging port.

Close-up of the 4-pin magnetic connector of the HIFI WALKER T10 Air charging cable

Слика 2: Детаљно view of the 4-pin magnetic connector, highlighting its design and contact points.

3. Подешавање

To set up your HIFI WALKER T10 Air Magnetic Charging Cable, follow these steps:

  1. Идентификујте компоненте: Locate the USB-A end of the charging cable and the magnetic 4-pin connector end.
  2. Повежите се на извор напајања: Insert the USB-A end of the cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source is functional.
  3. Повезивање са слушалицама: Align the magnetic 4-pin connector with the charging port on your HIFI WALKER T10 Air Bone Conduction Headphones. The magnetic connection will automatically snap into place. Ensure the pins are correctly aligned for a secure connection.
HIFI WALKER T10 Air headphones connected to a laptop via the magnetic charging cable

Image 3: The HIFI WALKER T10 Air headphones are shown connected to a laptop via the magnetic charging cable, illustrating a typical charging setup.

4. Упутство за употребу

Once the cable is securely connected to both a power source and your HIFI WALKER T10 Air headphones, charging will commence automatically. The charging status is typically indicated by an LED light on your headphones (refer to your headphone's manual for specific LED indicators).

  • Време пуњења: Charging duration varies based on the headphone's battery level and the power output of the USB source.
  • Пренос података: This cable is primarily designed for charging. While some data transfer may be possible, its primary function is power delivery.

5. Одржавање

Proper care of your charging cable will extend its lifespan:

  • Чишћење: Gently wipe the cable and magnetic connectors with a dry, soft cloth to remove dust or debris. Avoid using liquid cleaners directly on the connectors.
  • Складиштење: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage to the internal wires.
  • Руковање: Always grasp the connector ends when plugging or unplugging the cable. Avoid pulling on the cable itself, as this can damage the internal wiring.

КСНУМКС. Решавање проблема

If you encounter issues with your charging cable, consider the following:

  • Слушалице се не пуне:
    • Ensure the USB-A end is fully inserted into a working power source.
    • Verify the magnetic 4-pin connector is securely attached and correctly aligned with the headphone's charging port.
    • Try a different USB power source or port.
    • Inspect the cable for any visible damage (frays, bends, or broken connectors). If damaged, discontinue use.
  • Слаба веза:
    • Ensure there is no debris on the magnetic contacts of either the cable or the headphones.
    • Confirm the cable is designed for your specific HIFI WALKER T10 Air headphones.

7. Спецификације

ФеатуреДетаљ
БрандХИФИ ВАЛКЕР
Назив моделаТ10 Аир
Тип конектора4-Pin Magnetic, USB-A
Цабле ТипеУСБ
Компатибилни уређајиHIFI WALKER T10 Air Bone Conduction Headphones
Посебна карактеристикаМагнетиц Аттацхмент
Цабле МатериалТПЕ
Цабле ЛенгтхApprox. 2 feet (62.5 cm)
БојаЦрно
Број ставки2 (Two-Pack)
Diagram showing the HIFI WALKER T10 Air charging cable with its length specified as 2 feet (62.5 cm)

Image 4: The charging cable is displayed with its length clearly marked as 2 feet (62.5 cm).

8. Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your original purchase or contact HIFI WALKER customer service directly through their official webсајт или продавницу где је производ купљен.

Сачувајте доказ о куповини за гаранцијске захтеве.

© 2024 HIFI WALKER. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.