Глобе Елецтриц 17000207

Globe Electric 17000207 Triple Head Motion Activated LED Flood Light Security Light User Manual

Модел: 17000207

1. Безбедносне информације

Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.

  • УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање преко осигурача или прекидача пре инсталације или сервисирања.
  • This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications. If you are not familiar with these codes, a qualified electrician should perform the installation.
  • Do not install this fixture on surfaces that are easily flammable.
  • Уверите се да су сви прикључци сигурни и правилно изоловани.
  • Не гледајте директно у ЛЕД извор светлости.

2. Садржај пакета

Проверите да ли су све компоненте присутне пре почетка инсталације.

  • LED Flood Light Fixture (1)
  • Комплет хардвера за монтажу (1)
  • Упутство за употребу (1)

3. Спецификације

СпецификацијаВалуе
Број модела17000207
Извор напајањаХардвиред
Ватtage32 Ваттс
Осветљеност3200 лумена
Температура боје4000 Келвина (дневно бело)
Зона детекције покрета240 degrees, up to 50 ft (15 m)
МатеријалПластика
Унутрашња/спољна употребаОутдоор
Ниво отпорности на водуОтпоран на воду
Димензије (Д к Ш к В)7 cm x 12 cm x 8.4 cm
ГаранцијаДвогодишња ограничена гаранција произвођача
Dimensions of the Globe Electric 17000207 flood light, showing 12 inches width, 8.4 inches height, and 7 inches depth.

Image: Product dimensions for planning installation space.

4. Подешавање и инсталација

This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.

4.1 Опције монтаже

The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.

Diagram showing the flood light installed as a wall mount and an eave mount, with an arrow indicating rotation of the canopy for different orientations.

Image: Wall mount and eave mount installation options.

4.2 Кораци инсталације

  1. Искључите напајање: Before starting, ensure the power to the installation area is turned off at the circuit breaker or fuse box.
  2. Install Mounting Bar: Secure the mounting bar onto the junction box.
  3. Инсталирајте монтажну плочу: Attach the mounting plate to the mounting bar.
  4. Жичне везе: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
  5. Причврстите уређај: Secure the flood light fixture to the mounting plate using the center bolt.
  6. Печат: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
  7. Врати снагу: Once installation is complete and secure, restore power to the circuit.
Three step diagram showing installation: 1. Install mounting bar onto junction box. 2. Install mounting plate to the mounting bar. 3. Attach fixture to mounting plate with center bolt.

Image: Step-by-step installation guide.

5. Упутство за употребу

The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.

5.1 Motion Activation

The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.

Diagram illustrating a person walking within a 240-degree, 50-foot detection zone of the motion-activated flood light.

Image: Motion detection zone illustration.

5.2 MotionBright™ 2-Level Lighting

This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.

Side-by-side comparison showing the flood light providing low ambient light when no motion is detected, and full brightness when motion is detected.

Image: MotionBright feature demonstrating low and full brightness modes.

5.3 Подешавање подешавања

The motion sensor unit has adjustable dials to customize the light's behavior:

  • на време: Adjusts how long the light stays on after motion is detected (1, 5, or 20 minutes, or Test mode).
  • Sens (Sensitivity): Controls the range and sensitivity of the motion sensor (Low, Med, High).
  • Осветљеност: Adjusts the overall brightness of the light (Low, High).
  • MotionBright: Selects the operating mode (OFF, Dusk to Dawn, Hour).
Close-up image of the flood light's control panel, showing dials for On Time, Sensitivity, Brightness, and MotionBright settings, with labels for each function.

Image: Control dials for adjusting light settings.

5.4 Adjusting Lamp Главе

Три ЛЕД диодеamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.

Diagram showing the adjustable lamp heads of the flood light, with arrows indicating their range of motion.

Image: Adjustable lamp heads for directing light.

6. Одржавање

This LED flood light is designed for minimal maintenance.

  • Чишћење: Да бисте очистили уређај, уверите се да је напајање искључено. Обришите меком,amp тканина. Немојте користити абразивна средства за чишћење или раствараче.
  • ЛЕД: The integrated LED lights are not user-replaceable. Do not attempt to open the lamp главе.
  • Сензор: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.

КСНУМКС. Решавање проблема

If you experience issues with your flood light, refer to the following common problems and solutions:

ПроблемМогући узрокРешење
Светлост се не пали.No power, faulty wiring, sensor blocked, incorrect settings.Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings.
Светло остаје укључено непрекидно.Continuous motion detected, 'On Time' set too long, 'MotionBright' setting.Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn').
Motion not detected reliably.Sensor blocked, sensitivity too low, incorrect angle.Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage.
Светло трепери.Loose wiring connection, power fluctuations.Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected.

8. Гаранција и подршка

This Globe Electric product is backed by a Двогодишња ограничена гаранција произвођача од дана куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби.

For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.

За више информација посетите Globe Electric Store on Amazon.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.