Goldtouch 750g Electric Stainless Steel Grain Mill Grinder Instruction Manual

1. Увод

The Goldtouch 750g Grain Mill Grinder is designed for efficient grinding of various dry materials. Equipped with a powerful 2800W motor and a triple-blade design, it can process grains, spices, and herbs into fine powder. This manual provides essential information for safe and effective use, maintenance, and troubleshooting.

Кључне карактеристике:

• High-Efficiency Grinding: Robust 2800W motor with powder, rotating, and dust removal blades for efficient processing.
• Мултифункционална употреба: Suitable for dry grains (wheat, corn, rice, soybeans), spices (chili, cinnamon, bay leaves, pepper), herbs (dried basil, mint, parsley), and coffee beans.
• Издржљива конструкција: Made from 304 Stainless Steel for food safety and longevity.
• Подесива финоћа: Timer button allows for control over grinding fineness.
• Дизајн прилагођен кориснику: Features a 270-degree tilt for easy pouring and includes a cleaning brush.

2. Безбедносна упутства

To ensure safe operation and prevent damage to the appliance, please adhere to the following safety guidelines:

• Dry Materials Only: This grinder is designed exclusively for dry materials. Do not attempt to grind wet, moist, or oily substances as this can cause caking, motor damage, and potential hazards.
• Искључите пре руковања: Always disconnect the power supply before opening the lid, cleaning, or performing any maintenance to prevent accidental activation and injury from rotating blades.
• Proper Filling: Do not fill the grinding chamber with more than 2/3 of its capacity to avoid overloading the motor and potential spillage.
• Сигурни поклопац: Ensure the lid is tightly secured before operation. Improperly secured lids can lead to material spillage and potential hazards due to high-speed rotating blades.
• Периоди одмора: Allow the machine to rest for 5-10 minutes after running continuously for 3 minutes to prevent overheating and prolong motor life.
• No Water Washing: Never wash the machine directly with water. Use a dry cloth or brush for cleaning to prevent damage to electrical components.
• Безбедност сечива: The blades are extremely sharp. Exercise extreme caution when handling or cleaning the grinding chamber.
• Надзор: Држите децу и кућне љубимце подаље од уређаја током рада.

3. Структура производа

Familiarize yourself with the components of your Goldtouch Grain Mill Grinder:

слика: Product Structure of Goldtouch Grain Mill Grinder

• Lock Pin: Secures the lid in place.
• Aluminum Nut: Provides adjustable tension for the lid.
• 304 Crushing Cabin: The stainless steel chamber where materials are ground.
• Бакарни мотор: High-performance motor for powerful grinding.
• Карбонска четкица: Essential component for motor operation, replaceable.
• Светлосни индикатор: Illuminates when the machine is ready for operation.
• Прекидач: Power control for the grinder.
• Заштита од преоптерећења: Safety feature to prevent motor damage from excessive load.

4. Подешавање

Пре прве употребе следите ове кораке:

1. Raspakujte: Пажљиво уклоните све компоненте из паковања.
2. Прво чишћење: Wipe the inside of the grinding chamber with a damp cloth (vinegar solution recommended) to sanitize, then dry thoroughly.
3. First Run (Rice): For the first use, it is recommended to run a small amount of dry rice through the grinder to eliminate any residual manufacturing odors or particles. Discard this first batch.
4. Проверите оштрице: Ensure the grinding blades are securely fastened before each use.

5. Упутство за употребу

Пратите ове кораке за ефикасно млевење:

1. Припремите састојке: Ensure all materials are completely dry. Wet or oily materials are not suitable for this grinder.
2. Pour Ingredients: Pour the dry ingredients into the grinding chamber. Do not exceed 2/3 of the chamber's capacity. Observe the MAX and MIN capacity marks on the shell.
   

   слика: Pouring dry ingredients into the grinder.

3. Осигурајте поклопац: Close the lid tightly and rotate the clips to lock it into place. Ensure it is completely sealed to prevent spillage during operation.
   

   слика: Tightening the grinder lid.

4. Подесите време млевења: Use the timer dial to set the desired grinding duration. For a fine powder, 30-60 seconds is often sufficient, but adjust based on material and desired fineness. The machine has an automatic timer.
   

   слика: Setting the grinding time.
5. Започните млевење: Plug in the machine and press the power switch. The light indicator will illuminate. The machine will start grinding for the set duration.
6. Auxiliary Swing: During the grinding process, you can gently swing the machine body to ensure more uniform grinding and achieve a finer powder.
7. Unplug and Open: Once grinding is complete and the machine has stopped, unplug the power cord. Then, carefully unlatch and open the lid.
8. Сипајте прах: Utilize the 270-degree tilting feature to easily pour the ground material into a container. Use the provided brush to sweep out any remaining powder.
   

   слика: Sweeping out ground material.

Видео о операцији:

видео: Demonstrates the general operation of the Goldtouch Grain Mill Grinder, including loading ingredients, securing the lid, and pouring out the finished product.

видео: A detailed guide on how to use the Grain Mill Grinder, covering preparation and grinding steps.

6. Одржавање

Чишћење:

Редовно чишћење обезбеђује оптималне перформансе и хигијену:

1. Искључите и охладите: Always ensure the grinder is unplugged and has completely cooled down before cleaning.
2. Обришите: Use a soft brush or a dry cloth to remove any remaining grounds or powder from the grinding chamber and lid.
3. Избегавајте воду: Do not wash the machine directly with water to prevent damage to the motor and electrical components.
4. Складиштење: Store the cleaned machine in a cool, dry place.
   

   слика: How to clean the grain mill grinder.

Замена угљених четкица:

The grinder is equipped with carbon brushes on both sides at the bottom, which can be easily replaced:

1. Unscrew Cover: Use a slotted screwdriver to unscrew the carbon brush cover counterclockwise.
2. Замена четкице: Remove the old carbon brush and insert a new one.
3. Безбедан поклопац: Secure the carbon brush cover by turning it clockwise.
   

   слика: How to replace carbon brushes.

Carbon Brush Replacement Video:

видео: Step-by-step instructions for replacing the carbon brushes on the grinder.

Замена оштрице:

За замену оштрица:

1. Loosen Screw: Loosen one of the screws holding the blade.
2. Безбедна сечива: Insert a Phillips screwdriver to secure the blade.
3. Rotate Wrench: Rotate the wrench or socket counterclockwise to easily replace the blade.
   

   слика: How to replace the blades.

Blade Replacement Video:

видео: Instructions on how to change the carbon brush and blades of the grinder.

КСНУМКС. Решавање проблема

If you encounter issues with your grinder, consider the following:

• Overheating/Shutdown: If the machine gets too hot and shuts down, it may be due to overuse. Allow it to rest for 5-10 minutes after 3 minutes of continuous operation. Ensure the grinding bin is not overfilled.
• Incomplete Grinding/Coarse Powder: If the material is not ground to the desired fineness, extend the grinding time or perform multiple shorter grinding cycles with rest periods in between. Ensure the material is completely dry.
• Powder Spillage: Check that the lid is securely tightened and the clips are fully engaged before starting the machine. Adjust the tightness of the screws if necessary.
• Motor Brushes Loose: If you notice sparks or unusual operation, check if the motor brushes are loose. Tighten the covers and ensure brushes are properly seated. Refer to the Carbon Brush Replacement section.

8. Спецификације

9. Гаранција и подршка

Goldtouch provides a 1-year warranty for the grain grinder. If you encounter any issues or require assistance during use, please contact Goldtouch customer service for prompt help and support.