Hyuduo 30A PWM Solar Charge Controller User Manual

1. Увод

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hyuduo 30A PWM Solar Charge Controller. This device is designed to manage the power flow from your solar panels to your battery bank, ensuring efficient charging and protecting your battery from overcharge and over-discharge. It is suitable for 12V and 24V solar systems.

Слика 1: Предња страна view of the Hyuduo 30A PWM Solar Charge Controller.

2. Безбедносне информације

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in personal injury or damage to the controller or other equipment.

• Ensure the battery has sufficient voltage for the controller to recognize the correct battery type during first installation.
• Install the controller as close as possible to the battery to minimize voltage drop from long wires.
• This controller is designed for lead-acid batteries (OPEN, AGM, GEL). It is not suitable for other battery types.
• Ensure all connections are tight and correct to prevent damage.
• Do not disassemble or attempt to repair the controller yourself. Contact qualified personnel for service.
• Keep the controller away from water, flammable gases, and corrosive substances.

3. Карактеристике производа

The Hyuduo 30A PWM Solar Charge Controller incorporates advanced technology for reliable solar power management:

• Industrial Grade Master Control Chip: Ensures stable and efficient operation with complete 3-stagе ПВМ управљање пуњењем.
• Велики ЛЦД екран: Provides clear status and data, allowing easy mode switching and parameter configuration.
• Свеобухватна заштита: Built-in overcurrent, short circuit, open circuit, and reverse connection protection. All protections are self-recovery type, preventing damage to the controller.
• MOS Anti-Backup Circuit: Features ultra-low heat generation, ensuring optimal device performance and longevity.
• Издржљива конструкција: Made from excellent ABS material, providing impact resistance, high ignition point, and anti-aging/erosion properties.
• УСБ излаз: Two USB output ports (5V, 1A maximum) for charging external devices.

4. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне у вашем пакету:

• Hyuduo 30A PWM Solar Charge Controller
• Упутство за употребу (овај документ)

5. Производ је готовview

Familiarize yourself with the components of your solar charge controller.

Слика 2: Врх view showing connection terminals and buttons.

Слика 3: Детаљно view of the LCD display and control buttons.

5.1. Екран и дугмад

The large LCD display shows real-time system status and parameters. The three buttons below the display allow for navigation and setting adjustments:

• Лево дугме: Мени / Ентер
• Средње дугме: Горе / Повећај
• Десно дугме: Доле / Смањење

6. Спецификације

Note: The product description lists a Rated Discharge Current of 10A, while the product title specifies 30A. Please verify the actual rating on the product label or packaging.

7. Инсталација (Подешавање)

Follow these steps for proper installation of your solar charge controller. Ensure all power sources are disconnected before making any connections.

Слика 4: Задња страна view са прикључним терминалима за ожичење.

1. Повежите батерију: Connect the battery to the charge controller first. Ensure the battery has sufficient voltage for the controller to recognize the correct battery type (12V or 24V). Connect the positive (+) and negative (-) terminals correctly.
2. Повежите соларну плочу: Connect the solar panel to the charge controller. Ensure correct polarity (+ and -).
3. Connect the Load: Connect the DC load to the charge controller. Ensure correct polarity (+ and -).

Важно: Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

Install the controller in a well-ventilated area, away from direct sunlight and moisture. Mount it as close to the battery as possible to prevent voltage drop in the battery cables.

8. Упутство за употребу

Once installed, the controller will automatically begin charging. The LCD display provides real-time information about your system.

8.1. Режими приказа

The LCD cycles through various display screens automatically. You can also manually cycle through them or enter parameter setting mode using the buttons.

8.2. Конфигурација параметара

To adjust charging and discharge parameters:

1. Притисните тастер Мени button (left button) to enter the parameter setting interface.
2. Користите Up (middle) and Доле (right) buttons to navigate through parameters.
3. Притисните тастер Мени button again to select a parameter for modification. The value will start flashing.
4. Користите Up и Доле дугмад за промену вредности.
5. Притисните тастер Мени button to confirm the new value and exit the modification mode for that parameter.
6. Дуго притисните Мени дугме за излаз из интерфејса за подешавање параметара.

Refer to the specific icons on the LCD for battery status, solar charging status, and load discharge status.

9. Одржавање

Regular maintenance ensures optimal performance and longevity of your solar charge controller.

• Прегледајте везе: Периодично проверавајте све спојеве ожичења на чврстоћу и корозију.
• Очистите контролер: Одржавајте контролер чистим и без прашине и прљавштине. Користите суву крпу за чишћење.
• вентилација: Обезбедите добро проветравање простора за инсталацију како бисте спречили прегревање.
• Здравље батерије: Monitor your battery's health and ensure it is properly maintained according to the battery manufacturer's guidelines.

КСНУМКС. Решавање проблема

If you encounter issues with your solar charge controller, refer to the following common problems and solutions:

11. Гаранција и подршка

За информације о гаранцији или техничку подршку, обратите се продавцу или директно произвођачу. Сачувајте рачун као доказ о куповини.

За додатну помоћ, посетите Hyuduo Store.