Увод
This manual provides detailed instructions for the assembly, operation, and maintenance of your Yaheetech Metal Twin Bed Frame (Model YT-00136885). Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Безбедносне информације
Важне мере предострожности:
- Do not load more than 204 kg (450 lb) onto the bed frame.
- Carefully follow all assembly instructions to prevent instability or collapse.
- Будите опрезни око оштрих ивица током склапања и употребе.
- Ensure the bed frame is securely assembled to prevent unintended movement.
- Држите мале делове даље од деце током монтаже.
Листа делова
Before assembly, verify that all components listed below are present and undamaged. Refer to the assembly video for visual identification of parts.
Компоненте рама:
- Делови за узглавље и подножје кревета
- Сиде Раилс
- Center Support Beam with legs
- Металне летвице
хардвер:
- Various bolts, nuts, and washers (as per included hardware pack)
- Hex key and wrench (provided for assembly)
Упутство за монтажу
Follow these steps to assemble your Yaheetech Metal Twin Bed Frame. It is recommended to assemble the bed frame on a soft, clean surface to prevent scratches.
Видео водич за монтажу:
Video 1: Step-by-step assembly guide for the Yaheetech Metal Bed Frame. This video demonstrates the complete assembly process from unboxing to the final structure.
Step-by-Step Written Instructions:
- Саставите узглавље и подножје кревета:
Attach the vertical support posts to the decorative headboard/footboard panels using the provided bolts and washers. Ensure all connections are secure but do not fully tighten until all parts are aligned.
Figure 2: Detail of the headboard's curved design, showing the attachment points for the vertical posts. - Причврстите бочне ограде:
Connect the side rails to the assembled headboard and footboard sections. Use the appropriate bolts and washers, ensuring the side rails are correctly oriented. Hand-tighten bolts initially.
- Инсталирајте централни носач греде:
Position the center support beam, including its legs, in the middle of the frame. Secure it to the side rails using the designated hardware. This beam provides additional stability.
Figure 3: Illustration of L-shaped plates used to fasten frame components, enhancing structural stability. - Поставите металне летвице:
Lay the metal slats across the frame, fitting them into the designated slots on the side rails. Ensure all slats are evenly spaced and securely seated. The side rails are designed to be higher than the inserted slats to prevent mattress movement.
Figure 4: Detail showing the built-in metal slats and the raised side rail design, which helps to keep the mattress in place. - Завршно затезање:
Once all components are in place and aligned, use the provided hex key and wrench to fully tighten all bolts. Do not overtighten. Verify the frame is stable and level.
Карактеристике производа
- Издржљива конструкција: Crafted from heavy-duty powder-coated metal for long-lasting use.
- Integrated Headboard and Footboard: Features a curved design that adds to the aesthetic and helps secure bedding.
- Није потребна подлога за фиксирање: The metal slat system provides direct support for your mattress.
- Mattress Retention: Side rails are designed to be higher than the slats, preventing the mattress from sliding.
- Складиште испод кревета: Offers approximately 13 inches of clearance beneath the frame for storage solutions.
- Отпорно на шкрипу: Engineered for a stable and quiet sleep experience.
Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | Иахеетецх |
| Број модела | ИТ-00136885 |
| Величина | Твин |
| Боја | Црно |
| Материјал | Метал |
| Димензије производа (Д к Ш к В) | КСНУМКС к КСНУМКС к КСНУМКС цм (КСНУМКС к КСНУМКС к КСНУМКС инча) |
| Тежина артикла | 13.2 кг (29.2 лб) |
| Максимални капацитет тежине | 204 кг (450 лб) |
| Клиренс од тла | 13 инча |
| Компатибилна величина душека | Twin (75" x 39") |
| Посебне карактеристике | Curved Design Headboard, No Box Spring Needed, Squeak Resistant, Sturdy, Under Bed Storage |
Одржавање
Да бисте осигурали дуготрајност и оптималне перформансе вашег кревета, следите ове смернице за одржавање:
- Чишћење: Обришите метални оквир меком крпомamp крпом. Избегавајте абразивна средства за чишћење или јаке хемикалије које би могле оштетити завршну обраду.
- Затегните причвршћиваче: Периодично проверавајте све завртње и вијке да бисте били сигурни да су чврсто затегнути. По потреби их поново затегните да бисте одржали стабилност и спречили шкрипање.
- Избегавајте преоптерећење: Do not exceed the maximum weight capacity of 204 kg (450 lb) to prevent structural damage.
- пресељење: Када померате оквир кревета, подигните га уместо да га вучете како бисте спречили оштећење оквира или пода.
Решавање проблема
Ако наиђете на било какве проблеме са оквиром кревета, погледајте следеће уобичајене проблеме и решења:
- Шкрипави звуци:
Squeaking often indicates loose connections. Re-tighten all bolts and screws on the frame, especially where the side rails connect to the headboard/footboard and the center support beam.
- Frame Instability/Wobbling:
Ensure all bolts are fully tightened. Verify that the center support legs are making firm contact with the floor. Check that all frame components are correctly aligned as per the assembly instructions.
- Клизни душек:
The bed frame is designed with raised side rails to minimize mattress sliding. Ensure the mattress is correctly positioned within the frame. If sliding persists, consider using a non-slip mattress pad.
Гаранција и подршка
For warranty information or technical support, please refer to the documentation included with your purchase or contact Yaheetech customer service directly. Contact details can typically be found on the manufacturer's webсајт или ваш рачун о куповини.