1. Увод
This manual provides essential information for the safe installation, operation, and maintenance of your Onforu 100W LED Motion Sensor Security Light. Please read these instructions thoroughly before installation and retain them for future reference.
2. Безбедносне информације
УПОЗОРЕЊЕ: Опасност од струјног удара. Искључите напајање преко осигурача или прекидача пре инсталације или сервисирања.
- Ensure the power supply is turned off before attempting any installation, maintenance, or adjustment.
- Installation should be performed by a qualified electrician or a person with electrical knowledge.
- This product is designed for outdoor use and is IP65 waterproof rated. However, ensure all connections are properly sealed to maintain water resistance.
- Do not install near flammable materials or in areas with explosive atmospheres.
- Не гледајте директно у ЛЕД извор светлости када је осветљен, јер то може изазвати оштећење ока.
- Уверите се да површина за монтажу може да издржи тежину уређаја.
3. Садржај пакета
Пре почетка инсталације проверите да ли су све компоненте присутне:
- LED Security Light Fixture (Model BDB100G-3)
- Прибор за монтажу (шрафови, навртке за жицу)
- Упутство за употребу
4. Спецификације
| Феатуре | Спецификација |
|---|---|
| Број модела | БДБ100Г-3 |
| Ватtage | 100В |
| Осветљеност | 9000 лумена |
| Температура боје | 6000К (дневно бело) |
| Волtage | 120 Волтс |
| Угао сензора покрета | 180° |
| Опсег детекције покрета | 16.4 ft - 72 ft (5m - 22m) |
| Подешавање времена осветљења | 10 seconds - 7 minutes |
| Оцена водоотпорности | ИП65 |
| Материјал | Die-cast Aluminum, Plastic |
| Димензије (Д к Ш к В) | 15.3" x 8.2" x 4.7" (38.8 цм x 20.8 цм x 11.9 цм) |
| Тежина | 4.4 фунти (2 кг) |
| Тип монтаже | Wall Mount & Soffit Mount |
| Ideal Mounting Height | 10 ft - 16.4 ft (3m - 5m) |
5. Подешавање и инсталација
Before installation, ensure the power is OFF at the circuit breaker.
5.1 Компоненте прекоview
Слика 5.1: Расклопљено view of the security light, highlighting the 100W LED beads and high-precision light transmission design.
5.2 Монтажа уређаја
- Припремите монтажну површину: Choose a suitable location, ideally between 10 ft and 16.4 ft (3m - 5m) from the ground, ensuring the motion sensor has an unobstructed view of the desired detection area.
- Причврстите носач за монтажу: Secure the provided mounting bracket to the junction box using the included screws.
- Ожичење: Connect the household wiring to the fixture's wires. Typically, this involves:
- Црно (уживо) до црног (уживо)
- Бела (неутрална) до беле (неутралне)
- Green/Bare Copper (Ground) to Green (Ground)
- Осигурајте учвршћење: Carefully align the fixture with the mounting bracket and secure it in place. Ensure no wires are pinched.
Image 5.2: Installation diagram illustrating the steps to mount the security light to a wall or soffit.
Image 5.3: Detailed diagram showing the physical dimensions of the light heads and base, along with the standard three-wire electrical connections.
5.3 Adjusting Light Heads and Sensor
The three light heads can be adjusted independently to cover a wide area. The motion sensor can also be angled for optimal detection.
Image 5.4: The adjustable design allows for precise aiming of the light heads and motion sensor to cover a 270-degree detection zone.
6. Упутство за употребу
Once installed and power is restored, the light will enter a warm-up period (approximately 30-60 seconds) during which it may turn on and off. After this, it will operate according to the sensor settings.
6.1 Подешавања сензора покрета
The motion sensor has three adjustable dials:
Image 6.1: The motion sensor features three adjustable dials for customizing detection parameters.
- DISTANCE (SENS): Adjusts the motion detection sensitivity and range from 16.4 ft to 72 ft. Turn clockwise for higher sensitivity/longer range, counter-clockwise for lower sensitivity/shorter range.
- ВРЕМЕ: Sets how long the light remains on after motion is detected, ranging from 10 seconds to 7 minutes. Turn clockwise for longer illumination, counter-clockwise for shorter.
- LUX (Day/Night Mode): Одређује ниво амбијенталног осветљења при којем сензор постаје активан.
- Дневни режим (икона Сунца): Motion detection works during both day and night.
- Ноћни режим (икона Месеца): Motion detection works only at night or in low-light conditions.
6.2 Оптималне перформансе
Image 6.2: The motion sensor provides versatile detection for areas like driveways, with a wide sensing angle.
Image 6.3: The light provides super bright and ultra-wide illumination, covering a significant area.
7. Одржавање
The Onforu security light is designed for minimal maintenance. Regular cleaning can help maintain optimal performance.
7.1 Чишћење
- Ensure the power is OFF before cleaning.
- Обришите уређај меком крпомamp крпа. Не користите абразивна средства за чишћење или раствараче, јер могу оштетити завршну обраду или сочиво.
- Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
7.2 Отпорност на временске услове
Image 7.1: The IP65 waterproof rating ensures the light functions reliably in rain, sleet, snow, and sun.
КСНУМКС. Решавање проблема
If you experience issues with your security light, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Светлост се не пали. | Нема напајања. LUX setting is too low (Night Mode during daytime). Motion sensor obstructed or faulty. | Проверите прекидач и спојеве ожичења. Adjust LUX dial to Day Mode (Sun icon) for testing. Clear any obstructions from the sensor. Ensure sensor is aimed correctly. |
| Светло остаје укључено непрекидно. | Непрекидно кретање у подручју детекције. TIME setting is too long. Неисправност сензора. | Ensure no constant movement (e.g., tree branches, pets) is triggering the sensor. Adjust TIME dial to a shorter duration. Ако проблем и даље постоји, контактирајте корисничку подршку. |
| Light turns on too frequently or not enough. | DISTANCE (SENS) setting is too high/low. Sensor placement or angle is not optimal. Environmental factors (e.g., heat sources, reflective surfaces). | Adjust DISTANCE dial to desired sensitivity. Reposition or re-angle the sensor to cover the intended area and avoid unwanted triggers. Ensure the sensor is not pointed at direct heat sources or highly reflective surfaces. |
| Светлосни излаз је слаб или неуједначен. | Флуктуација снаге. Damaged LED beads. | Ensure stable power supply. If individual LED beads are visibly not working, the unit may require replacement. |
| Fixture feels wobbly after installation. | Лабава монтажа. Main connection to base plate not fully secured. | Ensure all mounting screws are tightened. Verify the main light assembly is firmly attached to the base plate. |
9. Гаранција
This Onforu product is covered by a 2-годишња ограничена гаранција од датума куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби. Не покрива штету насталу услед неправилне инсталације, несреће, злоупотребе, злоупотребе или неовлашћених модификација.
Сачувајте доказ о куповини за гаранцијске захтеве.
10. Корисничка подршка
If you have any questions, require technical assistance, or need to make a warranty claim, please contact Onforu customer support through the retailer's platform or visit the official Onforu webсајт за контакт информације.
Подршка на мрежи: Visit the Onforu Store on Amazon