ProLine 116-502 Gas Ball Valve

1. Производ је готовview

The ProLine 116-502 Gas Ball Valve is a forged brass valve designed for reliable shut-off in natural gas or LP gas applications. It features a durable 1-piece body construction and convenient 3/8-inch flare x flare connections. The valve is equipped with a chrome-plated ball and a quarter-turn lever handle for easy operation. This product is CSA 3-88 certified, ensuring compliance with safety and performance standards for gas appliances.

This image displays the ProLine 116-502 Gas Ball Valve, featuring a brass body, a yellow quarter-turn lever handle, and 3/8-inch flare connections on both ends. The valve is designed for gas applications.

2. Безбедносне информације

УПОЗОРЕЊЕ: Неправилна инсталација, подешавање, преинака, сервис или одржавање могу узроковати оштећење имовине, повреде или смрт. Пажљиво прочитајте упутства за инсталацију, рад и одржавање пре инсталирања или сервисирања ове опреме.

• Always ensure gas supply is turned off before installation or maintenance.
• Installation must be performed by a qualified professional in accordance with all local codes and regulations.
• Користите одговарајући алат и личну заштитну опрему.
• Check for leaks after installation using a non-corrosive leak detection solution.
• Do not use open flames to check for gas leaks.
• This valve is intended for natural gas or LP gas applications only. Do not use for other media.

3. Подешавање и инсталација

This section provides general guidelines for the installation of the ProLine 116-502 Gas Ball Valve. Always refer to local plumbing and gas codes for specific requirements.

3.1 Провере пре инсталације

1. Verify that the valve model 116-502 is suitable for your specific gas application (natural gas or LP gas).
2. Ensure the connection sizes (3/8-inch flare) match your existing piping.
3. Inspect the valve for any visible damage before installation. Do not install a damaged valve.
4. Gather all necessary tools, including wrenches, pipe thread sealant (if applicable for other connections in the system), and leak detection solution.

3.2 Кораци инсталације

1. Turn off Gas Supply: Locate the main gas shut-off valve and turn off the gas supply to the area where the valve will be installed.
2. Припремите везе: Ensure the flare connections on your gas lines are clean and free of debris.
3. Прикључите вентил: Align the valve with the gas lines. Hand-tighten the flare nuts onto the valve's flare connections.
4. Затегните везе: Using appropriate wrenches, carefully tighten the flare nuts. Do not overtighten, as this can damage the flare connections. Refer to manufacturer's recommendations for torque specifications if available, or tighten until snug and then an additional quarter to half turn.
5. Restore Gas Supply: Slowly turn the main gas supply back on.
6. Проверите да ли има цурења: Apply a non-corrosive leak detection solution to all new connections. Bubbles indicate a leak. If a leak is detected, turn off the gas supply immediately, re-tighten the connection, and re-test. Repeat until no leaks are present.

4. Упутство за употребу

The ProLine 116-502 Gas Ball Valve is designed for simple on/off operation.

• To Open the Valve: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is parallel with the gas flow direction.
• To Close the Valve: Rotate the yellow lever handle 90 degrees (a quarter-turn) so that it is perpendicular to the gas flow direction.

The quarter-turn design allows for quick and easy visual confirmation of the valve's open or closed status.

5. Одржавање

The ProLine 116-502 Gas Ball Valve is designed for long-term, maintenance-free operation under normal conditions. Regular inspection is recommended.

• Периодични преглед: Visually inspect the valve and connections periodically for any signs of corrosion, damage, or leaks.
• Провере цурења: If you suspect a leak, perform a leak check using a non-corrosive leak detection solution.
• Чишћење: Clean the exterior of the valve with a damp крпом ако је потребно. Не користите јаке хемикалије или абразивна средства за чишћење.
• Нема делова које може да сервисира корисник: This valve contains no user-serviceable parts. Do not attempt to disassemble or repair the valve. If the valve is damaged or malfunctioning, it must be replaced by a qualified professional.

КСНУМКС. Решавање проблема

This section addresses common issues that may arise with gas ball valves. Always prioritize safety and consult a professional for any complex issues.

• Откривено цурење гаса:
  • Симптом: Smell of gas, or bubbles when leak detection solution is applied.
  • Акција: Immediately turn off the main gas supply. Re-check all connections for proper tightening. If the leak persists, do not attempt further repairs. Contact a qualified gas technician.
• Valve Difficult to Turn:
  • Симптом: Lever handle is stiff or hard to rotate.
  • Акција: Do not force the handle. Excessive force can damage the valve. If the valve is new, it may be slightly stiff initially. If it becomes stiff over time, it may indicate internal wear or debris. The valve should be replaced by a qualified professional.
• Нема протока гаса:
  • Симптом: Appliance not receiving gas, even with valve in open position.
  • Акција: Ensure the valve handle is fully parallel to the pipe (open position). Check other shut-off valves in the system and the main gas supply. If the issue persists, contact a qualified gas technician.

7. Спецификације

8. Информације о гаранцији

For specific warranty details regarding the ProLine 116-502 Gas Ball Valve, please refer to the official ProLine website or contact their customer service directly. Warranty terms typically cover manufacturing defects under normal use and service.

9. Корисничка подршка

If you have any questions, require technical assistance, or need to report an issue with your ProLine 116-502 Gas Ball Valve, please contact ProLine customer support through their official channels. Always provide the model number (116-502) when seeking support.

За општа питања, можете посетити ProLine brand page on Amazon.