Karlsson Spry Square LED Alarm Clock Instruction Manual

1. Производ је готовview

The Karlsson Spry Square LED Alarm Clock (Model KA5982GY) is a compact digital alarm clock designed for clear time display and reliable alarm functionality. This manual provides detailed instructions for its setup, operation, and maintenance.

Слика 1: Предња страна view of the Karlsson Spry Square LED Alarm Clock, showing the time display.

2. Садржај пакета

• Karlsson Spry Square LED Alarm Clock (Model KA5982GY)
• USB Power Cable (DC 5V)
• Упутство за употребу

Note: Batteries (if required for backup) and a USB power adapter are typically not included and must be purchased separately.

3. Подешавање

3.1 Напајање уређаја

The alarm clock can be powered via a DC 5V USB connection or by batteries for backup. For continuous operation, it is recommended to use the USB power cable.

1. Повежите УСБ напајање: Insert the small end of the provided USB cable into the DC 5V port on the back of the alarm clock. Connect the larger end to a USB power adapter (not included) or a powered USB port.
2. Install Batteries (Optional Backup): Open the battery compartment cover on the back of the clock. Insert the appropriate batteries (e.g., AAA, type not specified, refer to compartment markings) ensuring correct polarity (+/-). Close the cover securely. Batteries provide backup power in case of a power outage, preserving time settings.

Слика 2: Позади view of the alarm clock, highlighting the DC 5V input, battery compartment, and control buttons (SET, UP, DOWN, RST).

3.2 Почетно подешавање времена

Upon first power-up or after a full power reset, the display may show a default time or flash. Follow these steps to set the current time:

1. Притисните и држите СЕТ дугме на полеђини сата док цифре сати не почну да трепћу.
2. Користите UP и ДОВН дугмад за подешавање сата.
3. Притисните тастер СЕТ поново притисните дугме да бисте потврдили сат и прешли на подешавање минута. Цифре за минуте ће трептати.
4. Користите UP и ДОВН дугмад за подешавање минута.
5. Притисните тастер СЕТ button one more time to confirm the minutes and exit time setting mode.

4. Упутство за употребу

4.1 Подешавање аларма

Да бисте подесили аларм:

1. Са нормалног приказа времена, притисните дугме СЕТ button once (do not hold). The display will show the current alarm time or 'OFF'.
2. While the alarm time is displayed, press and hold the СЕТ дугме док цифре сата аларма не затрепере.
3. Користите UP и ДОВН дугмад за подешавање сата аларма.
4. Притисните СЕТ again to confirm the alarm hour and move to the alarm minute setting.
5. Користите UP и ДОВН дугмад за подешавање минута аларма.
6. Притисните СЕТ one more time to confirm the alarm minutes and activate the alarm. An alarm indicator (e.g., a small bell icon or dot) should appear on the display.

4.2 Turning the Alarm On/Off

To toggle the alarm on or off without changing the set time:

1. Са нормалног приказа времена, притисните дугме СЕТ button once to show the alarm time.
2. Док је приказано време аларма, притисните UP or ДОВН button to toggle the alarm function on or off. The alarm indicator will appear or disappear accordingly.

4.3 Функција одлагања

When the alarm sounds, press any button (other than РСТ or the main power button if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typical snooze duration is 5-9 minutes, specific duration not provided). The snooze indicator may flash on the display.

4.4 Заустављање аларма

To stop the alarm completely when it is sounding, press the РСТ button or unplug the power. The alarm will reset for the next day at the set time.

5. Одржавање

5.1 Чишћење

To maintain the appearance of your alarm clock:

• Обришите површину меком, сувом крпом.
• За тврдокорне трагове, лагано дampНавлажите крпу водом. Избегавајте употребу абразивних средстава за чишћење, растварача или хемијских спрејева, јер могу оштетити завршну обраду.
• Ensure no liquid enters the device through openings.

5.2 Замена батерије

If using batteries for backup, replace them when the display becomes dim or if the clock loses time during power outages. Refer to section 3.1 for battery installation instructions.

КСНУМКС. Решавање проблема

• Екран је празан или замагљен:
  - Ensure the USB power cable is securely connected to both the clock and a working power source.
  - If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
• Сат губи време:
  - If powered by USB, ensure a stable power supply.
  - If relying on battery backup, replace the batteries.
• Аларм се не оглашава:
  - Verify that the alarm is set and activated (check for the alarm indicator on the display). Refer to section 4.1 and 4.2.
  - Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).
• Дугмад не реагују:
  - Try pressing the РСТ button on the back with a thin object (like a paperclip) to perform a soft reset. This may clear temporary issues without losing settings if backup batteries are present.
  - Disconnect and reconnect the power supply.

7. Спецификације

8. Гаранција и подршка

Warranty information for the Karlsson Spry Square LED Alarm Clock is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please contact Karlsson customer service directly through their official webсајт или продавац од кога је производ купљен.