Nitecore EDC25 EDC батеријска лампа - упутство за употребу

Увод

The Nitecore EDC25 is a high-performance Everyday Carry (EDC) flashlight designed for portability and powerful illumination. Featuring a slim, flat shape and USB-C rechargeable capabilities, it delivers up to 3000 lumens, making it suitable for various daily and tactical applications. This manual provides comprehensive instructions for its setup, operation, and maintenance.

Figure 1: Nitecore EDC25 Flashlight, showing the device, USB-C charging cable, and a Nitecore sticker.

Карактеристике

• Супер светло осветљење: Capable of a 3000 lumen maximum output with a beam throw of up to 328 yards (300 meters).
• Ултра-танак дизајн: Flat shape with a thin build of only 0.84 inches (13.7mm) and a weight of 3.67 oz (104g), designed for easy pocket carry.
• УСБ-Ц пуњиви: Equipped with a built-in USB-C charging port and power indicators for battery level monitoring. Fully charges in just over 1 hour, providing up to 55 hours of continuous use on the lowest setting.
• Интуитивна операција: Садржи два-сtage tactical button for precise control and a customizable tactical button for instant access to Turbo or Strobe modes.
• Издржљива конструкција: Made from aluminum alloy with HA III military-grade hard-anodized finish, offering resistance to scratches, sweat, and fingerprints.
• Отпорност на воду: Rated IP54 for water resistance.
• Отпорност на удар: Designed to withstand impacts from up to 1 meter.

Figure 2: The Nitecore EDC25 held in hand, demonstrating its slim and ergonomic design for everyday carry.

Шта је у кутији

Upon unboxing your Nitecore EDC25, please ensure all the following components are present:

• Nitecore EDC25 батеријска лампа
• УСБ-Ц кабл за пуњење
• Ланиард
• Налепница Nitecore

Сетуп

Пуњење батерије

1. Пронађите USB-C порт за пуњење са стране батеријске лампе.
2. Отворите заштитни поклопац USB-C порта.
3. Connect the provided USB-C charging cable to the flashlight and a power source (e.g., USB wall adapter, computer USB port).
4. The battery indicator lights (green LEDs) on the flashlight will illuminate to show the charging status. When all four green LEDs are solid, the battery is fully charged.
5. Once charging is complete, disconnect the cable and securely close the protective cover to maintain water resistance.

Figure 3: USB-C charging port with the protective cover open, ready for cable connection.

Индикација нивоа батерије

The EDC25 features four green LEDs to indicate the battery level:

• Four solid green LEDs: Approximately 75%-100% battery.
• Three solid green LEDs: Approximately 50%-75% battery.
• Two solid green LEDs: Approximately 25%-50% battery.
• One solid green LED: Approximately 0%-25% battery.

Figure 4: Battery (green) and Output (blue) indicator LEDs on the Nitecore EDC25.

Упутство за употребу

The Nitecore EDC25 features a dual tail button design for intuitive control.

Figure 5: The innovative dual tail buttons of the EDC25, designed for tactical applications.

Power Button (Two-Stage Tactical Button)

• Пуна штампа: Fully press the Power Button to turn the flashlight ON or ОФФ.
• Пола притиска: When the flashlight is ON, half-press the Power Button to cycle through the four brightness levels: Ultralow, Low, Mid, High.

Customizable Tactical Button (Strobe / Turbo Selectable)

This button provides instant access to either Turbo or Strobe mode, depending on your preference.

• Instant Turbo/Strobe: Press and hold the Customizable Tactical Button without releasing it to activate the selected mode (Turbo or Strobe). Release to turn off.
• Промена режима: While holding the Customizable Tactical Button, fully press the Power Button once to alternate between Turbo and Strobe modes.

Лоцкоут Моде

To prevent accidental activation, the EDC25 features a lockout mode.

• Engage Lockout: With the flashlight OFF, press and hold both the Power Button and the Customizable Tactical Button simultaneously for 2 seconds. The red indicator light will blink once to confirm lockout.
• Disengage Lockout: Repeat the same action (press and hold both buttons for 2 seconds). The red indicator light will blink twice to confirm unlock.

Figure 6: The red lockout indicator blinking once, confirming lockout mode engagement.

Figure 7: The red lockout indicator blinking twice, confirming lockout mode disengagement.

Одржавање

• Чишћење: Wipe the flashlight with a clean, soft cloth. For stubborn dirt, a slightly damp Може се користити тканина. Избегавајте јаке хемикалије или абразивне материјале.
• Порт за пуњење: Keep the USB-C charging port clean and free of debris. Always ensure the protective cover is securely closed when not charging to prevent dust and water ingress.
• Складиштење: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge the battery periodically to maintain its health.
• Управљање топлотом: The flashlight may become warm during prolonged use, especially in Turbo or High modes. This is normal. Allow the device to cool down if it becomes excessively hot.

Решавање проблема

Спецификације

Figure 8: Detailed technical specifications for the Nitecore EDC25 across various output modes.

Гаранција и подршка

The Nitecore EDC25 comes with a Limited Warranty. For specific warranty terms, conditions, and support inquiries, please refer to the official Nitecore webсајт или директно контактирајте њихову корисничку службу. Сачувајте рачун као доказ о куповини за потребе гаранције.

За додатну помоћ, можете посетити Nitecore продавница на Амазону.