WLLKIY 3000W Hybrid Solar Inverter Instruction Manual

1. Увод

This document provides comprehensive instructions for the installation, operation, and maintenance of the WLLKIY 3000W Hybrid Solar Inverter, Model SM-3200H. This multi-functional inverter/charger combines the functions of an inverter, MPPT solar charger, and battery charger to provide uninterruptible power support. It features a comprehensive LCD display for user-configurable operations such as battery charging current, AC/solar charger priority, and acceptable input voltage.

Кључне карактеристике:

• Pure sine wave output inverter.
• Волумен улаза који се бираtage range for home appliances or personal computers.
• Adjustable battery charging current via LCD display.
• Configurable battery charging priority mode.
• LCD display for monitoring and settings.
• Optional dust filter.
• Compatible with utility grid and generator inputs.
• Maximizes PV power utilization with automatic restart function upon PV restoration.
• Overload, high temperature, and inverter output short circuit protection.
• Функција хладног старта.
• Supports lithium batteries.
• Optional WIFI monitoring and setting capabilities.

2. Безбедносна упутства

Please read all instructions and warnings in this manual carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.

• Инсталацију мора извршити квалификовано особље.
• Осигурајте правилно уземљење претварача.
• Do not expose the inverter to rain, snow, or liquids of any type.
• Не растављајте уређај. Унутра нема делова које корисник може сам да поправи.
• Disconnect all power sources (PV, battery, AC) before performing any maintenance or wiring.
• Обезбедите одговарајућу вентилацију око инвертора како бисте спречили прегревање.

3. Производ је готовview

The WLLKIY SM-3200H is a compact and efficient hybrid solar inverter designed for various power applications. It integrates an inverter, solar charger, and battery charger into a single unit.

Слика 3.1: Предња страна view of the SM-3200H Hybrid Solar Inverter, highlighting its display and main features.

The inverter features a clear LCD display for monitoring system status and configuring operational parameters. The rear panel provides all necessary connection terminals for PV input, battery, AC input, and AC output.

Слика 3.2: Задња страна view of the SM-3200H, illustrating connection points for AC, battery, and PV.

Слика 3.3: Детаљан задњи део view of the SM-3200H, showing the input breaker and cooling vents.

4. Подешавање

Proper installation is crucial for the safe and efficient operation of your hybrid solar inverter. Ensure all local electrical codes are followed.

4.1 Распакивање и преглед

Upon receiving the inverter, carefully unpack it and inspect for any shipping damage. Report any damage to your dealer immediately. Ensure all accessories are present.

4.2 Монтажа јединице

Mount the inverter on a vertical surface in a clean, dry, and well-ventilated area. Ensure there is sufficient clearance around the unit for proper airflow. Avoid direct sunlight and heat sources.

4.3 Ожичење

All wiring must be performed with power disconnected from all sources. Use appropriate gauge wiring for all connections.

1. Повезивање батерије: Connect the battery bank to the BATTERY terminals. Ensure correct polarity (+ to + and - to -).
2. Повезивање PV панела: Connect the solar panel array to the PV IN terminals. Observe correct polarity and ensure the PV input voltagе не прелази 450ВДЦ.
3. АЦ улазна веза: Connect the utility grid or generator AC source to the AC IN terminals.
4. Прикључак на излаз наизменичне струје: Connect your loads (home appliances, computers) to the AC OUT terminals.

Figure 4.1: Typical system connection diagram for the SM-3200H Hybrid Solar Inverter.

5. Упутство за употребу

Once all connections are securely made, you can begin operating the inverter.

5.1 Укључивање/искључивање

1. За укључивање: Ensure the input breaker is in the 'ON' position. The inverter will perform a self-test and the LCD display will illuminate.
2. За искључивање: Disconnect all AC loads. Turn off the input breaker. Disconnect the PV input and then the battery input.

5.2 LCD екран и подешавања

The LCD display provides real-time system information and allows for configuration of various parameters. Use the buttons adjacent to the display to navigate menus and adjust settings.

• Надгледање: View улаз/излаз волtage, frequency, battery status, charging current, and load percentage.
• Подешавања параметара: Adjust settings such as battery charging current, AC input voltage range (170-280VAC for PC or 90-280VAC for appliances), and charger source priority (Solar first, Utility first, SBU priority).

6. Одржавање

Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег инвертора.

• Чишћење: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris. If an optional dust filter is installed, clean or replace it as recommended.
• Везе: Annually check all electrical connections for tightness and corrosion.
• Инспекција батерије: Regularly inspect battery terminals for corrosion and ensure battery voltagе је у прихватљивим границама.
• Окружење: Уверите се да окружење за инсталацију остаје у оквиру наведених опсега температуре и влажности.

КСНУМКС. Решавање проблема

Овај одељак пружа решења за уобичајене проблеме на које можете наићи.

Ако проблем и даље постоји након покушаја ових решења, обратите се корисничкој подршци.

8. Спецификације

9. Гаранција и подршка

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your dealer or the manufacturer directly.

Сачувајте рачун као доказ о куповини за потребе гаранције.