SKYSHL SS103PVC12 Optical Fiber Power Meter User Manual

1. Увод

The SKYSHL SS103PVC12 Optical Fiber Power Meter (OPM) is a compact and user-friendly instrument designed for comprehensive testing of fiber optic networks. It facilitates both absolute optical power measurement and relative optical loss measurement. This device is characterized by its robust design, wide power measurement range, high precision, and user self-calibration capabilities, making it a cost-effective solution for fiber optic professionals.

This manual provides detailed instructions for the safe and effective use of your SKYSHL SS103PVC12. Please read it thoroughly before operation and retain it for future reference.

2. Безбедносне информације

Придржавајте се следећих мера безбедности како бисте спречили повреде и оштећења уређаја:

• Ласерска безбедност: The Visual Fault Locator (VFL) emits a visible red laser. Не гледајте директно у ласерски зрак или view it with optical instruments. Direct exposure can cause severe eye injury.
• Безбедност батерије: Use only the specified battery type (3.7V 700mAh lithium battery). Do not disassemble, puncture, or expose the battery to extreme temperatures or fire. Dispose of batteries according to local regulations.
• Услови животне средине: Operate the device within specified temperature and humidity ranges. Avoid exposure to water, dust, and corrosive substances.
• Чишћење: Use a soft, dry cloth for cleaning the device. For optical connectors, use specialized fiber optic cleaning tools.
• Одржавање: Не покушавајте сами да отворите или поправите уређај. Све сервисирање препустите квалификованом особљу.

3. Садржај пакета

Проверите да ли су све ставке присутне у пакету:

• 1 x SKYSHL SS103PVC12 Optical Fiber Power Meter
• 1 x USB-A на Micro USB кабл за пуњење
• 1 x FC-LC Adapter
• 1 x Упутство за употребу (овај документ)

4. Производ је готовview

The SKYSHL SS103PVC12 is an all-in-one tool for fiber optic network testing. It combines an Optical Power Meter (OPM), a Visual Fault Locator (VFL), an RJ45 cable tester, and an LED flashlight.

4.1 Кључне карактеристике

• Multi-Wavelength Calibration: Supports 10 calibrated wavelengths: 850nm, 980nm, 1270nm, 1300nm, 1310nm, 1490nm, 1550nm, 1577nm, 1625nm, and 1650nm, suitable for both single-mode and multi-mode fiber testing.
• Широк опсег мерења: Measures optical power from -50dBm to +26dBm.
• Integrated VFL: 650nm red laser with a 30km range for identifying fiber breaks and continuity.
• RJ45 Cable Tester: For quick localization and testing of 8P/6P/4P network cables.
• Universal Connector Compatibility: Features a 2.5mm universal connector (compatible with FC/SC/ST) and includes an FC-LC adapter for LC connectors.
• Дуг век трајања батерије: Powered by a 3.7V 700mAh lithium battery, providing over 120 hours of typical operation.
• Компактан и издржљив дизајн: Ergonomic, portable, and built with high-strength plastic casing for resilience.
• ЛЦД екран од 2 инча: Јасан и лако читљив интерфејс.

4.2 Изглед уређаја

5. Подешавање

5.1 Пуњење батерије

The device is powered by a built-in 3.7V 700mAh lithium battery. Before first use, or when the battery indicator on the display shows low charge, connect the device to a USB power source using the provided Micro USB cable. The power button will illuminate red during charging.

5.2 Повезивање оптичких каблова

1. Ensure the fiber optic connector is clean. Use a fiber optic cleaning tool if necessary.
2. For FC, SC, or ST connectors, directly insert them into the 2.5mm universal port on the top of the device.
3. For LC connectors, attach the provided FC-LC adapter to the universal port, then insert the LC connector into the adapter.
4. Ensure a secure connection to prevent inaccurate readings.

5.3 Connecting RJ45 Cables

1. Detach the small RJ45 module from the side of the main unit.
2. Connect one end of the RJ45 cable to the port on the main unit.
3. Connect the other end of the RJ45 cable to the detached module.
4. Proceed to the operating instructions for RJ45 cable testing.

6. Упутство за употребу

6.1 Укључивање/искључивање

• Да бисте укључили, притисните и држите Дугме за напајање (red button with power symbol) for approximately 2 seconds.
• За искључивање притисните и држите тастер Дугме за напајање again for approximately 2 seconds.
• The device features an automatic power-off function after 10 minutes of inactivity to conserve battery.

6.2 Optical Power Measurement (OPM)

1. Изаберите таласну дужину: Притисните тастер λ (Wavelength) Button to cycle through the available calibrated wavelengths (850nm, 980nm, 1270nm, 1300nm, 1310nm, 1490nm, 1550nm, 1577nm, 1625nm, 1650nm). Select the wavelength corresponding to your fiber optic system.
2. Повежите оптичко влакно: Connect the fiber optic cable to the appropriate port as described in Section 5.2.
3. Read Absolute Power: The display will show the measured optical power in dBm.
4. Set Reference (Relative Measurement):
   • With a known good signal connected, press the REF/dB Button to set the current power reading as the reference value (0.00dB).
   • When measuring other points in the fiber link, the display will show the relative loss or gain in dB compared to the set reference.
   • Притисните тастер REF/dB Button again to toggle between absolute (dBm) and relative (dB) measurements.

6.3 Визуелни локатор грешака (VFL)

• Activate VFL: Притисните тастер VFL Button. The 650nm red laser will emit from the VFL port (located near the fiber optic input ports).
• Identify Faults: Connect the fiber to be tested to the VFL port. Observe the fiber for any visible red light leakage, which indicates breaks, sharp bends, or faulty connectors.
• Deactivate VFL: Притисните тастер VFL Button again to turn off the laser.
• Опрез: Always follow laser safety guidelines (Section 2).

6.4 RJ45 Cable Tester

• Ensure the RJ45 cable is connected to both the main unit and the detached module as described in Section 5.3.
• The device will automatically begin testing the cable continuity. The display will show the status of each wire pair (1-8 for 8P, 1-6 for 6P, 1-4 for 4P).
• A successful test will show all corresponding numbers lighting up sequentially or indicating continuity. Any missing or incorrect sequence indicates a fault (e.g., open, short, cross).

6.5 ЛЕД лампа

• Притисните тастер ЛЕД дугме to turn the integrated LED flashlight on or off. This is useful for working in dimly lit environments.

7. Одржавање

• Cleaning Optical Connectors: Regularly clean the fiber optic input ports and any adapters using specialized fiber optic cleaning swabs or pens. Dust and debris are the primary causes of inaccurate measurements.
• Чишћење уређаја: Обришите спољашњост уређаја меком, сувом крпом која не оставља влакна. Не користите абразивна средства за чишћење или раствараче.
• Одржавање батерије: For optimal battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and recharge every few months.
• Складиштење: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Use the protective caps for all ports when not in use.

КСНУМКС. Решавање проблема

If the problem persists after attempting these solutions, please contact SKYSHL customer support for assistance.

9. Спецификације

10. Гаранција и подршка

SKYSHL provides the following warranty for the SS103PVC12 Optical Fiber Power Meter:

• 3 Years Free Replacement
• 5 Years Free Maintenance
• Доживотна гаранција

For technical support, warranty claims, or any inquiries regarding your device, please contact SKYSHL customer service through the retailer where you purchased the product or visit the official SKYSHL webсајт за контакт информације.