VEVOR 180x350mm Mini Metal Lathe 550W User Manual

1. Увод и безбедносне информације

This manual provides essential instructions for the safe operation, setup, maintenance, and troubleshooting of your VEVOR 180x350mm Mini Metal Lathe. Read and understand all instructions before operating the machine. Keep this manual for future reference.

Опште безбедносне смернице

• Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and suitable clothing. Avoid loose clothing, jewelry, and long hair.
• Уверите се да је радни простор чист, добро осветљен и без препрека.
• Never operate the lathe under the influence of drugs, alcohol, or medication that may impair judgment.
• Искључите напајање пре него што извршите било какво одржавање, подешавања или када мењате додатну опрему.
• Keep hands clear of moving parts, especially the chuck and cutting tools.
• Securely mount all workpieces and cutting tools. Loose components can cause serious injury.
• Do not overload the machine. Operate within its specified capacity.
• Упознајте се са положајем и функцијом дугмета за хитно заустављање.

2. Производ је готовview и карактеристике

The VEVOR 180x350mm Mini Metal Lathe is designed for precision metalworking tasks, including turning, drilling, and threading. It features a robust construction and user-friendly controls for various small to medium-sized projects.

Слика 2.1: Опште view of the VEVOR Mini Metal Lathe, showcasinг његов компактан дизајн и главне компоненте.

Кључне карактеристике:

• Снажан мотор од 550 В: Equipped with a 550W DC single-phase motor, suitable for small to medium-scale projects.
• Контрола променљиве брзине: Spindle speed adjustable from 50 to 2500 RPM, monitored via a digital display.
• Durable Metal Gears: Enhanced design with metal gears for increased longevity and reliability.
• Precision 3-Jaw Chuck: A 4-inch (101.6 mm) 3-jaw chuck for securely holding workpieces.
• 4-Way Tool Post: Allows for quick changes and precise positioning of up to four standard turning tools.
• Adjustable Tailstock: Movable tailstock with MT2 taper for drilling and supporting longer workpieces.
• ЛЕД радно светло: Интегрисана ЛЕД диодаamp to illuminate the work area, improving visibility in low-light conditions.
• Automatic Power-off Cover: Safety feature to automatically cut power when the chuck guard is opened.

Слика 2.2: Детаљно view of the lathe's precise engineering, highlighting the automatic power-off cover, ultra-precise 3-jaw chuck, and the powerful 550W copper motor.

Figure 2.3: Control panel details, showing the precision chuck, emergency stop button, digital RPM display, and the variable speed adjustment knob (Low 1-1250RPM, High 100-2500RPM).

Укључена додатна опрема:

• 1 x Mini Metal Lathe
• 1 x LED Work Lamp
• 3 x Chuck Jaws (external)
• 7 x Turning Tools
• 1 x Set of Additional Accessories (e.g., wrenches, oil can)

3. Упутства за подешавање

3.1 Распакивање и преглед

• Пажљиво извадите струг и сву додатну опрему из паковања.
• Inspect all components for any signs of shipping damage. Contact customer support immediately if any damage is found.
• Remove any protective coatings or packing materials from the machine surfaces.

3.2 Постављање

• Place the lathe on a sturdy, level workbench capable of supporting its weight (approximately 40 kg / 88.18 lb).
• Ensure adequate clearance around the machine for safe operation and chip removal.
• The work area should be well-ventilated and have sufficient lighting.

3.3 Прикључак за напајање

• Connect the lathe to a grounded 220 V / 50 Hz power outlet.
• Ensure the power switch is in the 'OFF' position before plugging in the machine.

3.4 Почетно чишћење и подмазивање

• Clean all exposed metal surfaces, especially the bedways and slides, with a suitable degreaser to remove any factory grease or rust preventative.
• Apply a thin coat of machine oil to all moving parts and unpainted metal surfaces to prevent rust and ensure smooth operation.

4. Упутство за употребу

4.1 Укључивање/искључивање и заустављање у случају нужде

• To power on, ensure the emergency stop button is disengaged (pulled out) and the chuck guard is closed. Turn the main power switch to 'ON'.
• To power off, turn the main power switch to 'OFF'.
• In case of an emergency, press the red emergency stop button. This will immediately cut power to the spindle.

4.2 Подешавање брзине

• The spindle speed is adjusted using the variable speed knob on the control panel.
• The digital display shows the current RPM.
• Select the appropriate speed range (Low 1-1250 RPM or High 100-2500 RPM) using the switch, then fine-tune with the knob.

4.3 Монтажа радног комада

• Open the chuck jaws using the chuck key.
• Insert the workpiece, ensuring it is securely gripped by all three jaws.
• Чврсто затегните чељусти стезне главе кључем за стезну главу. Always remove the chuck key before starting the lathe.

4.4 Tool Post Operation

• The 4-way tool post allows for mounting multiple cutting tools.
• Loosen the locking handle to rotate the tool post and change tools.
• Adjust the tool height using shims or the tool post adjustment screws to ensure the cutting edge is on the centerline of the workpiece.
• Tighten the locking handle securely before operation.

4.5 Tailstock Adjustment

• To move the tailstock, loosen the tailstock locking handle.
• Slide the tailstock along the bedways to the desired position.
• Lock the tailstock in place by tightening the handle.
• The quill can be extended or retracted by turning the tailstock handwheel and locked with the quill lock.

Figure 4.1: Illustration of the movable tailstock and the 4-way tool post, demonstrating the lathe's large working capacity with a swing over bed of 7.09 inches (180 mm) and a center distance of 13.78 inches (350 mm).

4.6 Basic Turning Operations

• Суочавање са: Cutting the end of a workpiece to create a flat surface.
• окретање: Смањење пречника радног предмета.
• Тхреадинг: Cutting internal or external threads. Refer to the indicator table for appropriate gear settings for inch (12-52 TPI) and metric (0.5-2.5 mm) threads.
• бушење: Using the tailstock to drill holes in the center of the workpiece.
• Полирање: Finishing the surface of the workpiece.

Слика 4.2: Прamples of operations possible with the VEVOR Mini Metal Lathe, including metal turning, internal threading, external threading, turning & polishing, gyroscope processing, turned screw, slot turning, and taper turning.

5. Одржавање

Regular maintenance ensures the longevity and optimal performance of your VEVOR Mini Metal Lathe.

5.1 Чишћење

• After each use, clean the machine thoroughly to remove metal chips, dust, and coolant residue. Use a brush or shop vacuum; never use compressed air as it can embed chips into moving parts.
• Wipe down all surfaces, especially the bedways, with a clean cloth.

5.2 Подмазивање

• Regularly lubricate the leadscrews, cross slide, compound slide, and other moving parts with high-quality machine oil.
• Check and replenish the gearbox oil if applicable (refer to specific lubrication points in the diagram, if available).

5.3 Преглед опреме

• Periodically inspect the metal gears for wear or damage. Replace any worn gears to maintain precision.

Figure 5.1: Comparison highlighting the durable metal gears used in this lathe, which offer superior longevity compared to traditional nylon gears.

5.4 Електричне везе

• Периодично проверавајте све електричне спојеве на чврстоћу и знаке хабања.
• Уверите се да је кабл за напајање неоштећен.

5.5 Tool Sharpening

• Keep all cutting tools sharp. Dull tools can lead to poor surface finish, increased cutting forces, and potential damage to the machine or workpiece.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима на које можете наићи током рада.

7. Спецификације

Technical specifications for the VEVOR 180x350mm Mini Metal Lathe.

Figure 7.1: Visual representation of the lathe's key dimensions and specifications, including item weight and size.

8. Гаранција и подршка

Your VEVOR Mini Metal Lathe comes with a return policy and dedicated customer support.

8.1 Политика враћања

The product is eligible for returns within 30 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.

8.2 Корисничка подршка

For any questions, technical assistance, or warranty claims, please contact the seller, VEVOR Store FR. You can typically find their contact information on the platform where you purchased the product or by visiting their official store page: VEVOR Store FR.