Shinmax Bike Helmet User Manual

Производ је завршенview

The Shinmax Bike Helmet (Model HT19) is designed for adult cyclists, offering safety features, comfort, and visibility. It incorporates a high-density PC shell and EPS foam for impact absorption, a magnetic goggle system for eye protection, and an integrated LED rear light for enhanced visibility.

Image: Shinmax Bike Helmet in black, featuring magnetic goggles and an integrated LED rear light. The helmet has multiple vents for ventilation.

Безбедносне информације

This helmet is designed to reduce the risk of head injury during cycling. It meets CPSC/CPC safety standards. For maximum protection, ensure the helmet fits correctly and is securely fastened. Always replace your helmet after any impact, even if visible damage is not apparent.

• Изградња: The helmet features a high-density PC (Polycarbonate) shell and EPS (Expanded Polystyrene) foam, utilizing in-molding technology for improved safety performance.
• Апсорпција удара: The durable hard shell and detachable soft inner pads are designed to absorb pressure from external impacts.

Слика: Пресек view of the Shinmax helmet illustrating the high-density PC shell and impact-absorbing EPS foam, highlighting the in-mold technology for structural integrity.

Setup and Fit Adjustment

1. Measure Head Circumference: Use a tape measure to determine the circumference of your head, placing it from the forehead to the back of the head. This helmet is suitable for head circumferences of 54-58cm (M size) or 57-62cm (L size).
2. Почетни пласман: Place the helmet squarely on your head, ensuring it covers your forehead. It should not tilt backward or forward.
3. Adjust Retention System: Locate the adjusting knob at the back of the helmet. Turn the knob clockwise to tighten the fit or counter-clockwise to loosen it until the helmet feels snug and secure without being uncomfortably tight. The helmet should not move excessively when you shake your head.
4. Подесите каишеве за браду: Fasten the chin strap buckle. Adjust the straps so that they form a “V” shape under your ears. The strap should be snug against your chin, allowing only one or two fingers to fit between the strap and your chin.
5. Коначна провера: Ensure the helmet is level and stable. It should not obstruct your vision.

Image: A visual guide demonstrating how to measure head circumference and the correct way to wear the helmet, ensuring it sits level and covers the forehead.

Слика: Детаљна view of the helmet’s adjustable dial retention system located at the back, with arrows indicating “Tighten” and “Loosen” for precise fit adjustment.

Упутство за употребу

ЛЕД задње светло

The integrated LED rear light enhances your visibility to others, especially during low-light conditions or at night. It features three distinct lighting modes:

• Стабилан на: Обезбеђује континуирано осветљење.
• Споро трепери: A slow, rhythmic flash pattern.
• Брзо трепће: A rapid flash pattern for increased attention.

To cycle through the modes, press the button located on the LED light unit. Press once for steady, a second time for slow flash, a third time for fast flash, and a fourth time to turn it off.

Image: The helmet’s LED safety light, depicted with icons representing its three flashing modes: Always On, Slow Flash, and Fast Flash. A CR1616 backup battery is also shown.

Magnetic Goggles

The detachable magnetic goggles provide UV400 protection and shield your eyes from wind, sand, and strong ultraviolet light. They attach securely with three strong magnets.

• Attaching Goggles: Align the magnets on the goggles with the corresponding points on the helmet’s visor. The magnets will snap them into place.
• Detaching Goggles: Gently pull the goggles away from the helmet to detach them.
• Wearing Modes:
  • Goggles Down: For full eye protection during speedy riding or bright conditions.
  • Goggles Up: Flip the goggles upwards and they will magnetically attach to the helmet, out of your line of sight, suitable for slower riding or sightseeing.
  • No Goggles: Remove the goggles entirely for standard riding.
• Eyewear Compatibility: The design allows for wearing personal prescription glasses underneath the magnetic goggles.

Image: A visual representation of the three ways to wear the magnetic goggles: fully down for protection, flipped up and attached to the helmet, or completely removed.

Image: A side-profile diagram showing a person wearing the helmet in three configurations: without goggles, with goggles flipped up, and with goggles down for sun protection.

Одржавање

• Cleaning the Helmet: Use a soft cloth, mild soap, and water to clean the exterior of the helmet. Avoid harsh chemicals or abrasive materials, as these can damage the helmet’s shell or internal components.
• Cleaning Inner Liners: The helmet features removable inner liners for easy cleaning. Gently detach the liners, hand wash them with mild soap and water, rinse thoroughly, and allow them to air dry completely before reattaching them to the helmet.
• Goggle Care: Clean the magnetic goggles with a soft, lint-free cloth and a lens cleaning solution or water. Avoid wiping with abrasive materials to prevent scratches.
• Складиштење: Store the helmet in a cool, dry place away from direct sunlight and extreme temperatures. Do not store it in a hot car, as excessive heat can damage the EPS foam.

Image: An illustration showing the removable inner liners of the Shinmax helmet, indicating they can be easily detached for cleaning and reinserted.

LED Rear Light Battery Replacement

The LED rear light is powered by a CR1616 button cell battery. An extra replacement battery is included with your helmet. To replace the battery:

1. Remove Light Unit: Gently push the rear light unit out of its housing at the back of the helmet.
2. Open Light Casing: Пажљиво отворите цasing of the rear light. This may involve prying it open with a small flat tool or screwdriver.
3. Remove Circuit Board: Detach the small circuit board to access the battery compartment.
4. Замените батерију: Извадите стару CR1616 батерију и уметните нову, водећи рачуна о исправном поларитету (+/-).
5. Поново саставите: Place the circuit board back, close the light casing securely, and reinsert the light unit into the helmet until it clicks into place.

Image: A step-by-step visual guide demonstrating how to replace the CR1616 battery in the helmet’s LED rear light, including pushing out the light, opening it, removing the board, and replacing the battery.

Решавање проблема

Спецификације

Гаранција и подршка

This Shinmax product includes a limited warranty. For specific details regarding the warranty period and coverage, please refer to the documentation included with your product packaging or contact Shinmax customer support.

For any questions, technical assistance, or support inquiries, please contact the manufacturer, Shinmax, through their official channels. Contact information can typically be found on the product packaging or their official webсајту.