Јахитек ЈТ-00139009

Yaheetech 5-Tier Adjustable Metal Storage Shelving Unit Instruction Manual

Модел: ИТ-00139009

1. Увод

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Yaheetech 5-Tier Adjustable Metal Storage Shelving Unit. This heavy-duty unit is designed to offer versatile storage solutions for various environments, including garages, pantries, workshops, and more. Please read these instructions carefully before assembly and use to ensure safe and proper installation and operation.

A black Yaheetech 5-tier adjustable metal storage shelving unit, shown empty, highlighting its sturdy construction and five spacious shelves.Image: The Yaheetech 5-Tier Adjustable Metal Storage Shelving Unit.

2. Безбедносне информације

Важне мере предострожности:

  • Ограничење тежине: Do not exceed the maximum load capacity of 386 lb (175 kg) per tier. The total weight capacity for the unit is 1930 lb (875 kg). Overloading can cause structural failure and injury.
  • Опрез при монтажи: Exercise caution during assembly. Wear gloves to protect hands from sharp edges. A rubber mallet is recommended for assembly to prevent damage to components (not included).
  • Стабилност: Ensure the shelving unit is stable and level after assembly. Use the included anti-slip footpads for extra stability. For maximum safety, especially with heavy loads or in areas prone to movement, consider anchoring the unit to a wall (anchoring hardware not included).
  • Деца и кућни љубимци: Keep children and pets away from the shelving unit during assembly. Do not allow children to climb on or play with the shelves once assembled.
  • Пласман: Place the unit on a flat, stable surface. Avoid placing it in high-traffic areas where it could be easily bumped or tipped.
  • Руковање материјалом: Be aware that MDF boards can be susceptible to moisture. Avoid prolonged exposure to water or high humidity.

3. Садржај пакета

Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, contact customer service.

  • Vertical Posts (Uprights)
  • Horizontal Beams (Long and Short)
  • МДФ плоче (5 комада)
  • Fixed Connection Plates (for splitting into two smaller units, if desired)
  • Anti-slip Footpads
  • Пар рукавица
  • Упутство за употребу

Tools Recommended (Not Included): Руббер Маллет

4. Спецификације

МатеријалPowder-coated Iron Frame & MDF Boards
БојаЦрно
Укупне димензије28" L × 12" W × 60" H (70 cm L × 30 cm W × 152 cm H)
Број нивоа5
Max. Load Capacity Per Tier386 лб (175 кг)
Капацитет укупне тежине1930 лб (875 кг)
Тежина артикла19.7 лб (8.9 кг)
Обавезна монтажаYes (Boltless)
Упутства за негуОбришите сувом крпом

Diagram showing the dimensions of the Yaheetech 5-Tier Storage Shelf: 60 inches high, 27.5 inches wide, and 12 inches deep. It also indicates a maximum load of 330 lbs per shelf.Image: Product dimensions and maximum load capacity per shelf. Note: The image states 330lb per shelf, while specifications state 386lb. Always adhere to the lower stated weight limit for safety.

5. Подешавање и монтажа

The Yaheetech 5-Tier Storage Shelving Unit features a boltless design for quick and easy assembly. A rubber mallet is highly recommended to ensure components are securely fitted.

Кораци склапања:

  1. Припремите компоненте: Lay out all components on a clean, flat surface. Ensure you have all parts as listed in the "Package Contents" section. Wear the provided gloves to protect your hands.
  2. Assemble Vertical Posts: Connect the vertical posts (uprights) by sliding the interlocking tabs into the slots. Use a rubber mallet to gently tap them into place for a secure fit. If assembling two smaller units, use the fixed connection plates to join the shorter vertical posts.
  3. Attach Horizontal Beams: For the bottom shelf, connect the horizontal beams (long and short) to the vertical posts. The beams have tabs that fit into the keyhole slots on the posts. Ensure all four beams for a single shelf level are securely in place. Use a rubber mallet to tap them down until they are flush and firm.
  4. Place MDF Board: Once the frame for a shelf level is assembled, carefully place an MDF board onto the horizontal beams. Ensure it sits flat and securely within the frame.
  5. Поновите за преостале полице: Repeat steps 3 and 4 for the remaining four shelves. The height of each shelf is adjustable; you can choose the desired height by selecting different keyhole slots on the vertical posts.
  6. Attach Anti-slip Footpads: Once all shelves are assembled, attach the anti-slip footpads to the bottom of the vertical posts. These provide additional stability and protect your floor.

Four-step diagram showing boltless assembly: 1. Connect beam to vertical post. 2. Snap crossbar into place. 3. Place wooden board. 4. Attach non-slip foot pads.Image: Visual guide for the 10-minute boltless assembly process.

Image showing the Yaheetech shelving unit configured as a tall 5-tier unit and also as two shorter, workbench-style units, demonstrating flexible configuration options.Image: The shelving unit can be assembled as a single tall unit or two shorter, workbench-style units.

6. Упутство за употребу

Подешавање висине полице:

The shelves are fully adjustable to accommodate items of various sizes. To adjust a shelf:

  1. Уклоните све предмете са полице које желите да подесите.
  2. Carefully lift the MDF board out of its position.
  3. Disengage the horizontal beams from the vertical posts by gently tapping them upwards with a rubber mallet or by hand.
  4. Reattach the horizontal beams to the desired keyhole slots on the vertical posts, ensuring they are level and securely seated.
  5. Place the MDF board back onto the newly positioned beams.

Loading the Shelves:

  • Distribute weight evenly across each shelf to prevent stress on individual points.
  • Place heavier items on lower shelves to improve overall stability of the unit.
  • Do not exceed the maximum load capacity of 386 lb (175 kg) per tier or the total weight capacity of 1930 lb (875 kg) for the entire unit.

Image illustrating the adjustable nature of the shelves, showing items of different heights stored on shelves set at varying levels.Слика: прample of custom-fit shelving with adjustable heights.

7. Одржавање

  • Чишћење: Wipe the metal frame and MDF boards with a dry cloth to remove dust and debris. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
  • Заштита од влаге: The MDF boards are susceptible to moisture. Avoid prolonged exposure to water or high humidity to prevent warping or damage. If spills occur, wipe them immediately.
  • Редовна инспекција: Periodically check all connections to ensure they remain secure. If any part becomes loose, gently tap it back into place with a rubber mallet.
  • Управљање оптерећењем: Редовно реview the items stored on the shelves to ensure the weight limits are not exceeded and weight is distributed evenly.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Shelving unit feels unstable or wobbly.
  • Not all beams are fully seated.
  • Јединица није на равној површини.
  • Weight is unevenly distributed.
  • Use a rubber mallet to ensure all horizontal beams are securely tapped into the vertical posts.
  • Relocate the unit to a level surface or use shims under the footpads to level it.
  • Rearrange items to distribute weight evenly, placing heavier items on lower shelves.
  • Consider anchoring the unit to a wall for added stability.
Difficulty assembling beams into posts.
  • Tabs not aligned correctly.
  • Није примењена довољна сила.
  • Ensure tabs are perfectly aligned with the keyhole slots before tapping.
  • Use a rubber mallet to gently but firmly tap the beams into place. Avoid using a metal hammer directly, as it can damage the metal.
MDF boards sag or warp.
  • Exceeding weight limit.
  • Излагање влази.
  • Reduce the weight on the affected shelf. Ensure no single shelf exceeds 386 lb (175 kg).
  • Избегавајте постављање јединице у дamp environments. If exposed to moisture, dry immediately. Replace damaged MDF boards if necessary.

9. Гаранција и подршка

За информације о гаранцији, подршку за производ или да бисте се распитали о резервним деловима, обратите се директно корисничкој служби компаније Yaheetech. Погледајте контакт информације које сте добили уз куповину или посетите званичну веб страницу компаније Yaheetech. webсајту.

You can visit the Yaheetech store for more products and information: Јахитек продавница

© 2025 Јахитек. Сва права задржана.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.