Zerone S866 Electric LCD Display Panel User Manual

1. Увод

Thank you for choosing the Zerone S866 Electric LCD Display Panel. This manual provides essential information for the proper installation, operation, and maintenance of your new display. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Слика 1.1: Предња страна view of the Zerone S866 Electric LCD Display Panel, showing the screen and control buttons.

2. Карактеристике производа

• Једноставна контрола: Quick key functionality allows for straightforward control and parameter adjustment.
• Једноставна инсталација: Includes an LCD bracket for easy mounting on standard 22.2mm handlebars.
• Очисти екран: Provides clear status and data information with a backlight feature for visibility in low-light conditions.
• Виде Волtagе Компатибилност: Supports 24V, 36V, 48V, and 60V electric bike systems.
• Издржљив дизајн: Constructed from lightweight and robust ABS material, resistant to daily impacts.

3. Спецификације

4. Садржај пакета

Молимо вас да проверите да ли су све ставке присутне и у добром стању након отварања пакета:

• 1 x Zerone S866 Electric LCD Display Panel
• 1 x Упутство за употребу (овај документ)

5. Подешавање и инсталација

Follow these steps to properly install your Zerone S866 LCD Display Panel on your electric bicycle:

1. Prepare Handlebars: Ensure the handlebar area where you intend to mount the display is clean and free of obstructions. The display is designed for 22.2mm diameter handlebars.
2. Монтирајте дисплеј: Use the included bracket to securely attach the S866 display to your handlebar. Tighten the screws firmly but do not overtighten to avoid damage.


Figure 5.1: The S866 display panel shown mounted on bicycle handlebars, ready for connection.

3. Повежите ожичење: Carefully connect the display's cable to the corresponding port on your electric bicycle's controller or wiring harness. Ensure the connectors are fully seated and secure. Refer to your electric bike's wiring diagram if unsure.


Слика 5.2: Задња страна view of the S866 display, highlighting the integrated connection cable.

4. Управљање кабловима: Route the cable neatly along your bike frame and secure it with cable ties to prevent snagging or damage during riding.
5. Почетно укључивање: Once installed and connected, power on your electric bike. The display should illuminate and show initial data.

6. Упутство за употребу

The Zerone S866 LCD Display Panel provides clear information and easy control over your electric bike's functions.

Слика 6.1: Крупни план view of the S866 display, showing the digital speed, battery indicator, assist level, and trip distance.

6.1. Функције дугмета

• Дугме за укључивање (ⓘ):
  • Press and hold to turn the display ON/OFF.
  • Short press to cycle through display modes (e.g., Odometer, Trip Distance).
• Дугме горе (+):
  • Short press to increase assist level or navigate menu options upwards.
  • Long press (in certain modes) for specific functions (e.g., headlight control, if supported by your bike's controller).
• Дугме надоле (-):
  • Short press to decrease assist level or navigate menu options downwards.
  • Long press (in certain modes) for specific functions.

6.2. Прикажи информације

The LCD screen provides real-time data:

• брзина: Тренутна брзина вожње (км/х или мпх).
• Ниво батерије: Graphical indicator showing remaining battery charge.
• Ниво асистенције: Current pedal assist level (e.g., 0-5).
• Удаљеност путовања: Пређена удаљеност током тренутне вожње.
• Одометар: Укупна пређена удаљеност бициклом.
• Кодови грешака: Приказује одређене кодове ако дође до системске грешке.

6.3. Подешавање параметара

The display allows for basic parameter adjustments. Typically, this involves entering a settings menu by holding a combination of buttons (e.g., Up and Down simultaneously) for a few seconds. Common adjustable parameters may include:

• Unit System (km/h vs. mph)
• Пречник точка
• Баттери Волtagе Подешавање

Note: Specific parameter adjustment procedures may vary slightly. Refer to your electric bike's main controller manual for advanced settings.

7. Одржавање и њега

To ensure the longevity and proper functioning of your Zerone S866 LCD Display Panel, follow these maintenance guidelines:

• Чишћење: Обришите екран и кућиште меком крпомamp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as they can damage the plastic and screen.
• Изложеност води: While the display has an IP65 waterproof rating, avoid submerging it in water or exposing it to high-pressure water jets (e.g., from a power washer). Dry any moisture promptly.
• температура: Avoid exposing the display to extreme temperatures, both hot and cold, for extended periods.
• Утицај: Protect the display from physical impacts and drops, which can cause internal or external damage.
• Везе: Periodically check the wiring connections to ensure they are secure and free from corrosion.

КСНУМКС. Решавање проблема

If you encounter issues with your Zerone S866 LCD Display Panel, try the following troubleshooting steps:

If these steps do not resolve the issue, please contact Zerone customer support or your electric bike dealer for further assistance.

9. Гаранција и подршка

For specific warranty information regarding your Zerone S866 Electric LCD Display Panel, please refer to the warranty card included with your purchase or contact the seller directly. Zerone is committed to providing quality products and customer satisfaction.

For technical support or inquiries, please visit the official Zerone store on Amazon or contact their customer service channels as provided at the point of purchase.

Zerone Store Link: https://www.amazon.com/stores/Zerone/page/A619C4D9-FCE5-459B-B745-8DD2D44F2669