LAFAER Motion Sensor Under Cabinet Light

1. Садржај пакета

Проверите да ли су све ставке присутне у вашем пакету:

• 1 x LAFAER Motion Sensor Under Cabinet Light (Model EC-SL380)
• 1 x Mounting Hardware (includes metal base with adhesive and screws)
• 1 к Типе-Ц кабл за пуњење
• 1 x Упутство за употребу (овај документ)

2. Производ је готовview

The LAFAER Motion Sensor Under Cabinet Light features an adjustable lamp with a digital display for easy monitoring and control.

2.1 Компоненте

• Лигхт Бар: Contains LED lights and a magnetic surface for attachment.
• Контролни модул: Houses the motion sensor, digital display, and control buttons. This section can rotate relative to the light bar.
• Монтажна база: A metal base that can be attached to surfaces using adhesive or screws, providing a magnetic attachment point for the light.
• УСБ-Ц порт: За пуњење унутрашње батерије.

2.2 Digital Display Indicators

The intuitive digital display provides real-time information:

• Ниво батерије: Приказује преостали проценат снагеtage.
• Режим детекције: Indicates the currently active motion sensing mode (Constant On, Night Sensing, All-Day Sensing).
• Ниво осветљености: Displays the selected brightness percentage (25%, 50%, 75%, 100%).
• Температура боје: Shows the active color temperature (3000K, 4500K, 6500K).

Слика: Детаљна view of the digital display, illustrating battery level, brightness, and sensing mode icons.

3. Подешавање и инсталација

The LAFAER light offers flexible installation options to suit various indoor locations.

3.1 Magnetic Mounting

The light can be magnetically attached to any iron metal surface directly. For non-metallic surfaces, use the provided metal mounting base.

1. Припремите површину: Clean the desired installation surface to ensure it is dry and free of dust or grease.
2. Причврстите монтажну базу:
   • Adhesive Method: Peel the protective film from the adhesive on the back of the metal mounting base. Press the base firmly onto the cleaned surface for at least 30 seconds. Allow 24 hours for the adhesive to cure before attaching the light.
   • Screw Method: For a more permanent installation, use the provided screws to secure the metal mounting base to the surface.
3. Причврстите светло: Align the magnetic side of the light bar with the installed metal mounting base. The light will snap into place magnetically.

Image: Illustration of the magnetic installation process, showing the light bar attaching to two separate magnetic bases.

3.2 Hook Design

The light also features a built-in hook for hanging in various locations.

Слика: Детаљна view of the hook design on the light, allowing for versatile hanging options.

3.3 Adjusting Sensing Direction

The control module, which contains the motion sensor, can be rotated up to 120 degrees to customize the sensing direction.

Image: The light's digital display and motion sensor, highlighting the flexible sensing direction feature.

Image: A visual representation of the light's motion detection capabilities, showing a 10-foot range and 120-degree angle.

4. Упутство за употребу

The light is controlled via touch buttons located near the digital display.

4.1 Укључивање/искључивање

Press and hold the power button (usually the main button) for a few seconds to turn the light on or off.

4.2 Changing Sensing Modes

Cycle through the available sensing modes by pressing the mode button (refer to the product diagram for button identification).

• Constant On Mode: Светло остаје непрекидно укључено.
• Режим ноћног детекције: The light activates only when motion is detected in a dark environment.
• All-Day Sensing Mode: The light activates whenever motion is detected, regardless of ambient light conditions.

In sensing modes, the light automatically turns off if no motion is detected within the sensing area for approximately 25 seconds.

Image: Visual explanation of the All-Day Sensing Mode and Night Sensing Mode, including the automatic 25-second auto-off feature.

4.3 Adjusting Brightness Levels

Press the brightness button to cycle through four brightness levels: 25%, 50%, 75%, and 100%.

4.4 Промена температуре боје

Press the color temperature button to cycle through three color temperature options:

• Топла бела (3000К): A soft, yellowish light.
• Неутрално бела (4500К): A balanced, natural white light.
• Хладна бела (6500К): A bright, bluish-white light.

Image: Visual guide to selecting color temperatures and brightness levels, demonstrating the different light outputs.

5. Пуњење

The LAFAER light is equipped with a rechargeable internal battery. The digital display will show the current battery level.

1. When the battery level is low, connect the provided Type-C charging cable to the light's USB-C port.
2. Повежите други крај кабла са стандардним УСБ адаптером за напајање (није укључен).
3. The digital display will indicate charging status. A full charge can provide up to 6 months of use in motion-sensing mode (with an average of 6 triggers per day) or up to 32 hours of continuous lighting at 25% brightness.

Image: The light connected to a USB-C charging cable, illustrating its long-lasting battery capabilities.

6. Одржавање

• Чишћење: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Отпорност на воду: Овај производ је није водоотпоранИзбегавајте излагање води или високој влажности.
• Одржавање батерије: For optimal battery life, avoid fully discharging the battery frequently. Charge the light regularly.

КСНУМКС. Решавање проблема

8. Спецификације

9. Свестране примене

The LAFAER Motion Sensor Under Cabinet Light is designed for various indoor uses, providing illumination where needed.

Слика: прamples of the light's application in different indoor environments such as closets, garages, hallways, kitchens, bedrooms, and even tents.

10. Гаранција и подршка

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official LAFAER webсајту. Сачувајте рачун о куповини за гаранције.