Mcezdy P5C-6-Pin Ebike LCD Display User Manual

Увод

This manual provides instructions for the installation, operation, and maintenance of your Mcezdy P5C-6-Pin Ebike LCD Display. This display is designed to enhance your electric bike experience by providing real-time data and control over various functions.

Важна напомена о компатибилности: This P5C ebike display operates using the UART No. 2 protocol. Ensure your ebike controller is compatible with this protocol and features a 6-пински конектор за исправну функционалност.

Mcezdy P5C Ebike LCD Display showing compatibility warning for UART No. 2 protocol

Image: Mcezdy P5C Ebike LCD Display. This image highlights the critical requirement for UART No. 2 protocol compatibility.

The display features a durable ABS+PC housing, a tempered glass screen for clarity and scratch resistance, and an IPX65 waterproof rating for protection against water splashes and rain.

Подешавање и инсталација

Проверите компатибилност: Before installation, confirm that your ebike controller uses the UART No. 2 protocol and has a compatible 6-pin connector. Incompatible systems will not function correctly.
Монтажа дисплеја:
The display comes with an adjustable mount designed to fit handlebars with a diameter of 22.2mm. Position the display on the left side of your handlebar for optimal viewing and access to controls. Secure the mount firmly using the provided hardware.
Image: The Mcezdy P5C Ebike LCD Display mounted on a handlebar, demonstrating the adjustable mount for 22.2mm handlebars.
Повезивање кабла:
Locate the 6-pin waterproof cable (model JL-F-Z609AG) on your display. The exposed cable length is 150mm. Carefully connect this cable to the corresponding 6-pin connector on your ebike controller. Ensure the connection is secure and fully seated to prevent water ingress and ensure reliable communication.
Image: A selection of ebike display connector types, including the 6-pin connector relevant to this model. Ensure you use the correct connector for your system.
Укључивање: Once securely mounted and connected, power on your ebike. The display should illuminate, indicating a successful connection.

Упутство за употребу

The P5C-6-Pin display provides comprehensive information and control features for your ebike. Familiarize yourself with the display layout and button functions.

Mcezdy P5C Ebike LCD Display showing various metrics like speed, battery, PAS, and voltage

Image: The Mcezdy P5C Ebike LCD Display illustrating key metrics such as speed, battery level, Pedal Assist System (PAS) level, and voltage.

Метрике приказа:

брзина: Тренутна брзина вожње (км/х или мпх).
Ниво батерије: Индикатор напуњености батерије у реалном времену.
ПАС (Систем помоћи при педалирању): Тренутни ниво помоћи.
Волtagе (ВОЛ): Вол. батерије у реалном временуtage.
Индикатор фарова: Shows if the ebike's headlight is active.
Путна километража: Пређена удаљеност током тренутне вожње.
Total Mileage (ODO): Total distance covered by the ebike.

Функције и контроле:

Укључивање/искључивање: Typically controlled by a dedicated button on the display or ebike system. Refer to your ebike's main manual for specific power procedures.
PAS Level Adjustment: Use the '+' and '-' buttons (or similar controls) to increase or decrease the pedal assist level.
Режим помоћи при ходању: Activates a low-speed assist for walking the ebike. Consult your ebike's manual for activation method, usually by holding a specific button.
темпомат: Allows the ebike to maintain a set speed without continuous throttle input. Activation varies by ebike model; refer to your ebike's manual.
Модификација параметра: The display allows customization of certain parameters such as wheel diameter and speed limit. Accessing these settings typically involves a sequence of button presses. Exercise caution when modifying parameters, as incorrect settings can affect performance and safety.

Одржавање

Proper maintenance ensures the longevity and optimal performance of your Mcezdy P5C-6-Pin Ebike LCD Display.

Чишћење: Користите меку, дamp cloth to clean the display screen and housing. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the tempered glass or plastic components.
Отпорност на воду: The display has an IPX65 waterproof rating, meaning it is protected against low-pressure water jets from any direction. While it can withstand rain and splashes, avoid submerging the display in water or exposing it to high-pressure water streams.
Инспекција каблова: Periodically check the connection cable for any signs of wear, damage, or loose connections. Ensure the waterproof connector remains clean and free of debris.
Складиштење: When not in use for extended periods, store the ebike and display in a dry, temperate environment, away from direct sunlight and extreme temperatures.

Решавање проблема

If you encounter issues with your Mcezdy P5C-6-Pin Ebike LCD Display, refer to the following common problems and solutions:

Проблем	Могући узрок	Решење
Екран се не укључује.	Лабава кабловска веза. Incompatible protocol or connector. Ebike battery low or off.	Check the 6-pin cable connection to the controller. Confirm your ebike controller uses UART No. 2 protocol and a 6-pin connector. Ensure ebike battery is charged and powered on.
Incorrect speed or mileage readings.	Неправилно подешавање пречника точка. Проблем са сензором брзине.	Access display settings to verify and adjust wheel diameter. Inspect the ebike's speed sensor for damage or misalignment.
Display shows error codes.	Неисправност система.	Refer to the "Fault Code Description" document included with your display or ebike for specific error code meanings and troubleshooting steps.
Екран је замагљен или нечитљив.	Brightness setting too low. Директни одсјај сунчеве светлости.	Check display settings for brightness adjustment. Adjust riding position or angle to minimize glare.

If problems persist, contact customer support or a qualified ebike technician.

Спецификације

Mcezdy P5C Ebike LCD Display dimensions and key specifications

Image: Detailed specifications of the Mcezdy P5C Ebike LCD Display, including dimensions, cable length, model numbers, and work voltage.

Модел: P5C-6-Pin
Бренд: Мцезди
Тип приказа: LCD, Color
Протокол повезивања: UART No. 2 (Wired)
Цомпатибле Волtage: DC 24V, 36V, 48V, 60V
Материјал кућишта: АБС + ПЦ
Материјал екрана: Каљено стакло
Материјал носача: Најлон
Компатибилност пречника управљача: 22.2мм
Тип кабла: 6-pin waterproof cable (JL-F-Z609AG)
Exposed Cable Length: 150мм
Међународни рејтинг заштите: IPX65 (Protected against dust and low-pressure water jets)
Унос људског интерфејса: Дугмад
Тип сензора: Спеед Сенсор
Димензије (приближне): 2.7" (width) x 2.1" (height) - Refer to image for detailed measurements.
Тежина: Отприлике 91 г

Информације о гаранцији

Specific warranty terms and conditions for the Mcezdy P5C-6-Pin Ebike LCD Display may vary. Please retain your proof of purchase and refer to the retailer or manufacturer's official webсајт за детаљне информације о гаранцији и поступке регистрације.

Корисничка подршка

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your Mcezdy P5C-6-Pin Ebike LCD Display, please contact your point of purchase or the manufacturer, Mcezdy, through their official support channels.

Mcezdy P5C-6-Pin