GOOLOO GP3000/A3 3000A Jump Starter with 150PSI Air Compressor Instruction Manual

1. Производ је готовview

The GOOLOO GP3000/A3 is a versatile 5-in-1 device combining a powerful 3000A peak current jump starter, a 150PSI air compressor, a portable power bank, an LED flashlight, and an SOS emergency light. It is designed to provide reliable assistance for various vehicles and devices.

Figure 1: GOOLOO GP3000/A3 Jump Starter and Air Compressor unit with accessories.

2. Подешавање и пуњење

2.1 Пуњење јединице

Before first use, fully charge the GP3000/A3 unit. Use the provided USB-C cable and a compatible charger (not included) to charge the device. The battery level indicator on the screen will show charging progress.

2.2 Connecting Jumper Cables

1. Open the protective cap on the jump starter port.
2. Insert the blue end of the smart jumper cable into the jump starter port on the GP3000/A3 unit. Ensure a secure connection.
3. The smart jumper cable features built-in safety protections against over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltagе, преоптерећење, отпорно на варнице и обрнуто пуњење.

2.3 Connecting Air Compressor Hose

1. Locate the air compressor hose port on the unit.
2. Screw the air compressor hose securely into the port.
3. Attach the appropriate nozzle from the accessory kit for the item you wish to inflate.

3. Упутство за употребу

3.1 Покретање возила скоком

1. Ensure the GP3000/A3 unit is sufficiently charged.
2. Повежите црвени цлamp на позитивни (+) пол акумулатора возила.
3. Повежите црни цлamp на негативни (-) пол акумулатора возила.
4. Check the smart jumper cable indicator light. A solid green light indicates a correct connection and the unit is ready. If the light is red or flashing, check connections for reverse polarity or other issues.
5. If the vehicle battery is completely dead or voltage is too low to detect, press the "BOOST" button on the smart jumper cable. The indicator light will turn solid green, providing maximum power for 30 seconds.
6. Start the vehicle. Once the vehicle starts, immediately remove the clampс са терминала батерије.

Figure 2: Jump starter connected to a vehicle battery for emergency starting.

3.2 Надувавање гума

1. Connect the air compressor hose to the tire valve.
2. Turn on the GP3000/A3 unit. The screen will display the current tire pressure.
3. Use the mode button to select the appropriate inflation mode (SUV, car, bike, ball, or customizable).
4. Use the +/- buttons to set the desired pressure (PSI, BAR, or KPA).
5. Press the start button to begin inflation. The compressor will automatically shut off once the preset pressure is reached.

Figure 3: The unit inflating a vehicle tire, displaying current and target pressure.

3.3 Функционалност преносне батерије

The GP3000/A3 features USB-A and USB-C output ports to charge smartphones, tablets, and other USB-powered devices. Simply connect your device using a compatible USB cable.

Figure 4: The jump starter unit charging various electronic devices.

3.4 LED Flashlight and SOS Light

Press and hold the power button for 3 seconds to turn on the LED flashlight. Press the power button again to cycle through different modes: solid light, strobe, and SOS signal. Press and hold again to turn off.

Figure 5: Demonstrating the normal, strobe, and SOS modes of the integrated LED flashlight.

4. Безбедносне информације

The GP3000/A3 is equipped with 10 smart safety protections, including over-charge, over-current, short-circuit, reverse-polarity, low-temp, high-temp, over-voltage, over-load, spark-proof, and reverse-charge protection. Always follow these guidelines for safe operation:

• Не урањајте јединицу у воду.
• Немојте растављати јединицу.
• Чувати ван домашаја деце.
• Use only the provided smart jumper cables.
• Do not jump start a vehicle with a severely damaged or frozen battery.

Figure 6: Smart jumper cable highlighting the 10 built-in safety protections.

5. Одржавање и складиштење

The GP3000/A3 is designed for durability with over 1000+ charge cycles. To ensure longevity and optimal performance:

• Пуните уређај сваких 3-6 месеци, чак и ако се не користи, како бисте одржали здравље батерије.
• Store the unit in a cool, dry place away from direct sunlight and extreme temperatures. The operating temperature range is -4°F to 140°F (-20°C to 60°C).
• Очистите уређај сувом, меком крпом. Не користите јаке хемикалије или абразивне материјале.

КСНУМКС. Решавање проблема

• Уређај се не укључује: Уверите се да је уређај напуњен. Притисните и држите дугме за напајање неколико секунди.
• Jumper cable indicator light is red/flashing: Check for reverse polarity (red clamp on negative, black on positive) and correct the connection. If the battery is extremely low, use the BOOST function.
• Компресор за ваздух се не надува: Ensure the hose is securely attached and the desired pressure is set. Check for leaks in the hose or tire valve.
• Unit overheating: The device has built-in overheat protection. If it becomes too hot, it will temporarily shut down. Allow it to cool down before resuming use.

7. Спецификације

• Peak Cranking Ampераге: 3000 Amps
• Баттери Волtage: 12 Волтс
• Састав батерије батерије: Литхиум Полимер
• Max Engine Compatibility: До 9.0 литара бензина, 6.5 литара дизела
• Max Tire Inflator Pressure: 150 ПСИ
• Проток ваздуха: 35Л/мин
• Радна температура: -4°Ф до 140°Ф (-20°Ц до 60°Ц)
• УСБ излаз: USB-A (5V/3A), USB-C (5V/3A, 9V/2A, 12V/1.5A)
• Капацитет батерије: 44.4 Вх

8. Званични видео производа

Watch this official video from GOOLOO for a demonstration on how to jump start a car using a similar model.

Video 1: How to Jump Start a Car Using GOOLOO GT6000 (similar to GP3000/A3).

9. Гаранција и подршка

For warranty information, technical support, or further inquiries, please refer to the official GOOLOO website or contact GOOLOO customer service directly. You can also visit the GOOLOO Store on Amazon.