1. Увод
Thank you for choosing the ATOMSTACK A6 Ultra 6W Laser Engraver. This manual provides essential information for the safe and effective operation, setup, and maintenance of your device. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The ATOMSTACK A6 Ultra is a high-precision laser engraving and cutting machine designed for various materials, featuring a 6W optical laser output and a unibody frame for ease of use.
2. Безбедносне информације
Operating a laser engraver involves potential risks. Adhere to all safety guidelines to prevent injury or damage to the equipment.
2.1 Опште мере предострожности
- Заштита очију: Always wear appropriate laser safety goggles when the laser is operating. The device includes a protective shield, but additional eye protection is recommended.
- вентилација: Operate the engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving and cutting.
- Опасност од пожара: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation.
- Компатибилност материјала: Only engrave or cut materials specified as safe for laser processing. Avoid materials that produce toxic fumes or are highly reflective.
- Деца и кућни љубимци: Keep children and pets away from the laser engraver at all times. The protective cover helps prevent accidental exposure to the laser point.
- Хитно заустављање: Упознајте се са положајем и радом дугмета за хитно заустављање.
- Напајање: Use only the provided power adapter. Ensure the power supply meets the specified voltagе захтеве.
2.2 Интегрисане безбедносне функције
- Laser Protective Cover: The device is equipped with an orange protective cover that filters laser light, reducing the need for additional eyewear for observers and preventing pets from seeing the laser spot.
- Auto Laser Shut-off: The enclosure features two interlocks that automatically shut off the laser when the cover is opened during operation.
- Гранични прекидачи: Four-direction limit switches provide enhanced safety by defining the operational boundaries of the laser module.
- Position Movement Protection & Fire Detection: The system includes features to detect abnormal movement and potential fire hazards, enhancing operational safety.
Слика 2.1: A visual representation of the ATOMSTACK A6 Pro's comprehensive safety features, including mechanisms for position movement protection, fire detection, double-layer eye protection, automatic laser shut-off when the cover is open, and four-direction limit switches for enhanced operational safety.
3. Садржај пакета
Проверите да ли су све ставке присутне у вашем пакету:
- 1 x ATOMSTACK A6 Ultra Laser Engraving Machine
- 1 x B3 Dust Cover
- 1 x H2 Base Kit
- 1 x Power Adapter (100-240V AC, 50/60HZ input; 24V 5A output)
- 1 к УСБ кабл
- 1 x Упутство за употребу (овај документ)
- Necessary assembly tools and accessories (e.g., screws, wrenches)
4. Спецификације
| Феатуре | Спецификација |
|---|---|
| Бранд | АТОМСТАЦК |
| Модел | A6 Ultra (A6 Pro) |
| Величина гравирања | 365 к 305 мм |
| Total Machine Power | 50В |
| Optical Laser Output Power | 5-6В |
| Ласер Вавеленгтх | 455 ± 5 нм |
| Ласер Спот | 0.05 к 0.05 мм |
| Режим фокусирања | Fixed focus laser (no focusing required) |
| Оперативни софтвер | ЛасерГРБЛ, ЛигхтБурн |
| Подржани оперативни системи | Виндовс, Линук, мацОС |
| Подржано File Форматс | JPG, JPEG, SVG, PNG, BMP, PDF, G-код, DXF |
| Метод преноса података | USB, APP |
| Повер Инпут | 100-240V AC, 50/60HZ |
| Излазна снага | 24В 5А |
| Цертификати | CE, FCC, RoHS, FDA, PSE |
| Димензије производа (Д к Ш к В) | 60 к 17 к 60 цм |
| Тежина производа | 7.5 кг |
| Број модела | T-A6UH2 |
5. Подешавање
The ATOMSTACK A6 Ultra features a unibody frame design, significantly simplifying the setup process. Most components are pre-assembled, allowing for quick deployment.
5.1 Почетна монтажа
- Raspakujte: Пажљиво уклоните све компоненте из паковања.
- Позиционирање: Поставите гравер на стабилну, равну површину у добро проветреном простору.
- Прикључите напајање: Plug the power adapter into the engraver and then into a suitable power outlet.
- Повезивање са рачунаром (опционо): If using a computer for control, connect the engraver to your computer via the provided USB cable.
- Инсталирајте софтвер: Install the recommended operating software (LaserGRBL or LightBurn) on your computer. Refer to the software's documentation for installation instructions.
Слика 5.1: A user setting up the ATOMSTACK A6 Pro laser engraver, highlighting its unibody frame design that requires no complex installation, allowing for immediate use after unboxing.
Слика 5.2: The ATOMSTACK A6 Pro laser engraver featuring its integrated camera for precise positioning, alongside a screenshot of the LightBurn software interface demonstrating its use.
6. Упутство за употребу
This section outlines the basic steps for operating your ATOMSTACK A6 Ultra laser engraver.
6.1 Припрема за гравирање/сечење
- Укључено: Turn on the main power switch of the engraver.
- Покретање софтвера: Open LaserGRBL or LightBurn software on your computer.
- Постављање материјала: Place the material to be engraved or cut onto the working bed. Ensure it is flat and securely positioned.
- Фокусирање: The A6 Ultra features a fixed-focus laser, eliminating the need for manual focusing.
- Увоз дизајна: Увезите свој дизајн file (JPG, JPEG, SVG, PNG, BMP, PDF, G-Code, DXF) into the software.
- Подешавања параметара: Adjust laser power, speed, and passes according to the material type and desired effect. Refer to material testing guides for optimal settings.
- Позиционирање: Use the software's positioning features, potentially utilizing the built-in camera for precise alignment of your design on the material.
6.2 Почетак рада
- Безбедносна провера: Ensure all safety precautions are in place, including wearing safety goggles and confirming proper ventilation.
- Покрени посао: Initiate the engraving or cutting process from the software.
- Надгледање: Continuously monitor the machine during operation. Be prepared to use the emergency stop if any issues arise.
- Завршетак: Once the job is complete, the laser will stop. Wait for any smoke or fumes to clear before opening the protective cover and removing the material.
6.3 Компатибилност материјала
The ATOMSTACK A6 Ultra is compatible with a wide range of materials for engraving and cutting:
- Wood (Basswood, Pine wood, Paulownia, Bamboo)
- Акрил
- Кожа
- Папир, картон
- Фабриц
- Some plastics (ensure they do not produce toxic fumes)
Always perform small test engravings on new materials to determine optimal settings and ensure safe processing.
Слика 6.1: Изложба сликаasing the ATOMSTACK A6 Pro laser engraver's versatility in processing different materials, including basswood, acrylic, pine wood, paulownia, bamboo, and leather, suitable for both cutting and engraving.
7. Одржавање
Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег ласерског гравера.
- Чишћење сочива: Periodically clean the laser lens with a specialized lens cleaning solution and a lint-free cloth. A dirty lens can reduce laser power and engraving quality.
- Cleaning the Engraving Bed: Remove debris and dust from the engraving bed after each use. A clean bed helps maintain consistent engraving results.
- подмазивање: Check the guide rails and moving parts for smooth operation. Lubricate as needed with appropriate lubricants to prevent friction and wear.
- Ажурирања фирмвера: Check the ATOMSTACK official website for any available firmware updates for your device to ensure you have the latest features and bug fixes.
- Заштитни поклопац: Keep the B3 Dust Cover clean to maintain visibility and ensure its protective properties. The integrated 7500RPM fan helps with efficient ventilation and dust removal.
Слика 7.1: The ATOMSTACK A6 Pro laser engraver enclosed within its protective cover, illustrating benefits such as noise reduction, fire resistance, efficient ventilation, and dust protection for a safer and cleaner engraving experience.
КСНУМКС. Решавање проблема
Овај одељак се бави уобичајеним проблемима на које можете наићи и нуди могућа решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Ласер не пуца | Power not connected; Emergency stop engaged; Software error; Protective cover open. | Check power connections; Release emergency stop; Restart software/computer; Ensure protective cover is fully closed. |
| Лош квалитет гравирања | Incorrect laser settings (power/speed); Dirty lens; Material not flat; Incorrect focus (though A6 Ultra is fixed focus, ensure material is at correct height). | Adjust laser power/speed in software; Clean laser lens; Ensure material is flat; Verify material height. |
| Машина се не повезује са рачунаром | USB cable issue; Driver not installed; Software not recognizing device. | Try a different USB port/cable; Install necessary drivers; Restart software/computer; Check device manager for recognition. |
| Unexpected movement or stopping | Loose cables; Obstruction on rails; Software command error; Limit switch triggered. | Check all cable connections; Clear any obstructions; Restart job; Inspect limit switches for damage or obstruction. |
9. Гаранција и подршка
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. ATOMSTACK products typically come with a manufacturer's warranty covering defects in materials and workmanship.
For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact ATOMSTACK customer service through their official website or the contact information provided with your product. When contacting support, please have your model number (A6 Ultra / T-A6UH2) and purchase details ready.