Увод
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Pro-Ject Debut EVO 2 Audiophile Turntable. Please read these instructions carefully before using the turntable to ensure proper function and longevity of the product.
Image: The Pro-Ject Debut EVO 2 turntable in High Gloss Red, featuring a clear dust cover, platter, and tonearm.
Безбедносна упутства
- Always disconnect the turntable from the power supply before cleaning or maintenance.
- Не додирујте кабл за напајање мокрим рукама.
- Avoid placing the turntable near water or excessive moisture.
- Ensure the turntable is placed on a stable, level surface to prevent vibrations and ensure proper operation.
- Keep packaging materials, especially plastic bags, away from children.
Шта је у кутији
Carefully unpack all items from the packaging. Please ensure all components listed below are present and undamaged.
- Про-Јецт Дебут ЕВО 2 грамофон
- Transparent Dustcover
- Connection Cable (RCA)
- Повер Адаптер
- Алигнмент Протрацтор
- Single Adapter (for 45 RPM records with large center holes)
- Платтер
- Погонски ремен
- Противтежа
- Тежина против клизања
- Pick it MM EVO Cartridge (pre-mounted)
Сетуп
КСНУМКС. Постављање
Place the turntable on a firm, level surface, away from direct sunlight, heat sources, and excessive vibration. Ensure adequate ventilation around the unit.
2. Постављање плоче и каиша
- Place the main platter onto the sub-platter spindle.
- Carefully loop the drive belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.
Слика: Детаљна view of the turntable's belt drive system, showing the belt wrapped around the sub-platter and motor pulley.
3. Tonearm Balance and Tracking Force
The Pick it MM EVO cartridge is pre-mounted. Follow these steps to set the tracking force:
- Уклоните заштитник игле.
- Place the counterweight onto the rear of the tonearm.
- Adjust the counterweight until the tonearm floats freely and is perfectly balanced horizontally.
- Rotate the tracking force dial (the numbered ring on the counterweight) to '0' without moving the counterweight itself.
- Rotate the entire counterweight counter-clockwise until the desired tracking force is set. Refer to the cartridge specifications for the recommended tracking force (typically 1.8g for the Pick it MM EVO).
Image: A close-up of the carbon fiber tonearm, illustrating its construction and connection points.
4. Подешавање против клизања
The anti-skating mechanism counteracts the inward force on the tonearm. Attach the anti-skating weight's thread to the second groove of the anti-skating stub for the recommended tracking force.
Image: The anti-skating weight hanging from its thread, attached to the tonearm's anti-skating stub.
5. Повезивање са Ampлифиер
Connect the turntable's RCA output cables to the 'Phono' input of your ampлифиер. Ако је ваш ampЛајфајер нема посебан „Фоно“ улаз, биће вам потребан спољни фоно претпојачавач.ampлифиер.
Image: The rear panel of the turntable, displaying the RCA output jacks for audio connection and the power input.
6. Уградња поклопца за прашину
Insert the hinges of the transparent dust cover into the designated slots at the rear of the turntable plinth.
Оперативни
1. Укључивање/искључивање
Connect the power adapter to the turntable and a wall outlet. The turntable is powered on by pressing the power button, usually located on the underside or side of the plinth.
2. Избор брзине
The Debut EVO 2 features electronic speed selection. Use the speed selector switch (often a button on the plinth) to switch between 33 1/3 RPM and 45 RPM. For 78 RPM records, a special belt and stylus may be required (not included).
3. Репродукција плоче
- Ставите плочу на тањир.
- Select the correct playback speed.
- Подигните ручицу грамофона помоћу полуге за подешавање звука.
- Поставите ручицу грамофона преко жељеног почетног жлеба плоче.
- Gently lower the tonearm using the cueing lever. The stylus will begin playing the record.
4. Заустављање репродукције
At the end of a record, or when you wish to stop playback:
- Подигните ручицу грамофона помоћу полуге за подешавање звука.
- Вратите ручицу у њено постоље.
- Lower the cueing lever.
- Turn off the turntable if not playing another record.
Одржавање
1. Чишћење
- Постоље грамофона и поклопац за прашину: Use a soft, lint-free cloth to wipe surfaces. For stubborn marks, a slightly damp cloth can be used, followed by a dry one. Avoid abrasive cleaners.
- тањир: Clean the platter surface with a soft, dry cloth.
2. Нега оловке
- Regularly clean the stylus using a dedicated stylus cleaning brush, brushing gently from back to front.
- Избегавајте додиривање оловке прстима.
- Replace the stylus when signs of wear are apparent (e.g., distorted sound, increased surface noise). The Pick it MM EVO cartridge is designed for easy stylus replacement.
Слика: Детаљна view of the Pick it MM EVO cartridge mounted on the tonearm, highlighting its design.
3. Замена каиша
The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced torque, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.
Решавање проблема
If you encounter issues with your turntable, consult the following table before contacting support.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Нема струје | Кабл за напајање није повезан; утичница је неисправна | Check power connections; Try a different outlet |
| Нема звука или је тиха | Изабран је погрешан унос amplifier; Cables loose; Stylus protector still on; Amplifier not set to 'Phono' input | Select correct input; Check all cable connections; Remove stylus protector; Use a phono preampлифиер ако је потребно |
| Изобличен звук | Incorrect tracking force; Damaged stylus; Dirty stylus; Incorrect anti-skating setting | Adjust tracking force; Inspect/clean/replace stylus; Adjust anti-skating |
| Недоследна брзина | Drive belt worn or loose; Motor pulley dirty | Replace drive belt; Clean motor pulley |
| Зујање | Ground wire not connected; Interference from other electronics | Ensure ground wire is connected; Move turntable away from other electronics |
Спецификације
- Назив модела: Деби ЕВО 2
- Бренд: Про-Јецт
- Број модела ставке: 9120129864930
- Димензије производа: 16.4 к 12.6 к 4.5 инча (41.6 к 32 к 11.4 цм)
- Тежина артикла: 13.2 фунте (6 килограма)
- Материјал: Carbon Fiber (tonearm)
- Тип мотора: Појас погон
- Формат сигнала: Пхоно
- Укључене компоненте: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter
- Компатибилни уређаји: AmpЛифиер, Спеакер
- Произвођач: Про-Јецт аудио системи
Гаранција
Pro-Ject Audio Systems offers a warranty for this product. Please refer to the warranty card included with your purchase or visit the official Pro-Ject webсајт за детаљне услове гаранције. Сачувајте доказ о куповини за потребе подношења захтева за гаранцију.
Key Warranty Feature: 25-year spare parts availability guarantee, ensuring long-term support for your turntable.
Подршка
For further assistance, technical support, or spare parts, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webсајт:
- Pro-Ject Store: Visit the Pro-Ject Store on Amazon
- Произвођач: Про-Јецт аудио системи