Pro-Ject Debut EVO 2 Audiophile грамофон - упутство за употребу

1. Увод

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your Pro-Ject Debut EVO 2 Audiophile Turntable. The Debut EVO 2 represents the next generation of Pro-Ject's best-selling audiophile turntables, featuring a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge. Designed for longevity, this turntable offers premium vinyl listening experience.

2. Безбедносна упутства

Please read these safety instructions carefully before operating your turntable. Keep this manual for future reference.

• Напајање: Користите само адаптер за напајање који се испоручује са уређајем. Уверите се да је јачина звукаtagе одговара вашем локалном извору напајања.
• Вода и влага: Do not expose the turntable to rain or moisture. Do not place objects filled with liquids, such as vases, on the apparatus.
• Извори топлоте: Do not place the turntable near heat sources such as radiators, heat registers, stoves, or other apparatus (including ampлифиерс) који производе топлоту.
• вентилација: Обезбедите одговарајућу вентилацију. Не блокирајте вентилационе отворе.
• Чишћење: Чистите само сувом крпом. Избегавајте употребу течних или аеросолних средстава за чишћење.
• Сервисирање: Do not attempt to service the turntable yourself. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• деца: Држати ван домашаја деце. Мали делови могу представљати опасност од гушења.

3. Шта је у кутији

Carefully unpack all items from the packaging. Please ensure all components listed below are present:

• Pro-Ject Debut EVO 2 Turntable Unit
• Transparent Dustcover
• Connection Cable (RCA)
• Повер Адаптер
• Алигнмент Протрацтор
• Single Adapter (for 45 RPM records with large center hole)
• Платтер
• Погонски ремен
• Противтежа
• Анти-скате Веигхт

4. Водич за подешавање

Follow these steps to set up your Pro-Ject Debut EVO 2 turntable for optimal performance.

4.1. Постављање и нивелисање

Place the turntable on a stable, level surface away from vibrations and direct sunlight. Use a spirit level to ensure the turntable is perfectly horizontal. The adjustable feet can be used for fine-tuning the level.

Image: The Pro-Ject Debut EVO 2 turntable in Satin Steel Blue, showcasing its sleek design and stable base. Proper placement on a level surface is crucial for optimal sound quality.

4.2. Инсталација плоче и погонског ремена

1. Carefully place the heavy die-cast aluminum platter onto the spindle.
2. Locate the drive belt. Gently stretch the belt around the sub-platter and the motor pulley. Ensure the belt is not twisted.

Слика: Детаљна view of the turntable's platter and the drive belt mechanism. The belt connects the motor pulley to the sub-platter, ensuring consistent rotation.

4.3. Tonearm Balancing and Tracking Force Adjustment

The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps to balance the tonearm and set the tracking force:

1. Remove the stylus protector from the cartridge.
2. Lower the tonearm lift.
3. Carefully rotate the counterweight on the rear of the tonearm until the tonearm floats freely and is perfectly balanced horizontally.
4. Once balanced, hold the counterweight steady and rotate the tracking force dial (the numbered ring on the front of the counterweight) to '0'.
5. Rotate the entire counterweight (including the dial) counter-clockwise until the dial shows the recommended tracking force for the Pick it MM EVO cartridge, which is typically 1.8 grams. Refer to the cartridge specifications for precise values.

Image: A close-up of the tonearm assembly, showing the counterweight and the anti-skate mechanism. Proper adjustment of these components is vital for accurate tracking and sound reproduction.

4.4. Anti-Skate Adjustment

The anti-skate mechanism prevents the tonearm from being pulled towards the center of the record. The Debut EVO 2 uses a weight-on-string anti-skate system.

1. Locate the small anti-skate weight and the anti-skate stub on the tonearm.
2. Hang the loop of the anti-skate weight's string over the second groove of the anti-skate stub. This setting is generally suitable for the pre-mounted cartridge.

4.5. Повезивање са Ampлифиер

Connect the supplied RCA cable from the turntable's output jacks (L and R) to the PHONO input on your ampлифиер или фоно преamplifier. Ensure the ground wire is connected from the turntable to the ground terminal on your ampлифиер/преampублаживач за минимизирање зујања.

Слика: Детаљна view of the turntable's rear panel, showing the left (L) and right (R) RCA output jacks, along with the ground terminal. These connections are essential for transmitting the audio signal to an ampлифиер.

4.6. Прикључак за напајање

Connect the power adapter to the DC input on the turntable and then plug it into a wall outlet.

4.7. Dustcover Installation

Carefully insert the hinges of the transparent dustcover into the receptacles at the rear of the turntable plinth.

5. Упутство за употребу

5.1. Укључивање/искључивање

The turntable is powered on when the power adapter is connected. There is no separate power switch. To turn off, disconnect the power adapter.

5.2. Избор брзине

The Debut EVO 2 features electronic speed selection. Use the switch located on the plinth to select between 33 ⅓ RPM and 45 RPM. For 78 RPM records, a special belt and stylus are required (sold separately), and the speed switch can be set to 78 RPM after installing the appropriate belt.

5.3. Репродукција плоче

1. Ставите плочу на тањир.
2. Select the correct playback speed (33 ⅓ or 45 RPM).
3. Подигните тонар-руку помоћу полуге за подизање тонар-а.
4. Carefully position the stylus over the lead-in groove of the record.
5. Gently lower the tonearm using the tonearm lift lever. The stylus will descend onto the record and playback will begin.

5.4. Заустављање репродукције

1. At the end of a record, the tonearm will remain in the run-out groove.
2. Подигните тонар-руку помоћу полуге за подизање тонар-а.
3. Return the tonearm to its rest and secure it with the tonearm clamp.
4. Скините плочу са плоче.

6. Одржавање

Regular maintenance will ensure the longevity and optimal performance of your turntable.

6.1. Чишћење грамофона

• Always disconnect the turntable from the power outlet before cleaning.
• Use a soft, lint-free cloth to wipe down the plinth and platter. Avoid abrasive cleaners or solvents.
• The dustcover can be cleaned with a soft, damp cloth. Avoid harsh chemicals that may scratch or cloud the acrylic.

6.2. Чишћење оловке

• Use a dedicated stylus cleaning brush or fluid.
• Always brush the stylus from back to front (from the pivot point towards the tip) to avoid damaging the cantilever.
• Clean the stylus regularly to remove dust and debris that can degrade sound quality and damage records.

Слика: Крупни план view of the pre-mounted Pick it MM EVO cartridge on the carbon fiber tonearm. Regular cleaning of the stylus is important for maintaining audio fidelity.

КСНУМКС. Решавање проблема

If you encounter issues with your turntable, refer to the following common problems and solutions.

If the problem persists after attempting these solutions, please contact Pro-Ject customer support or your authorized dealer for assistance.

8. Спецификације

9. Гаранција и подршка

Pro-Ject Audio Systems stands behind the quality of its products. The Pro-Ject Debut EVO 2 turntable is designed for longevity and comes with a 25-year spare parts availability guarantee, ensuring that your turntable can be maintained for a lifetime.

For technical support, warranty claims, or further assistance, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webсајт. Сачувајте рачун као доказ о куповини у сврху гаранције.

Више информација и ресурса за подршку можете пронаћи на Pro-Ject Store on Amazon.