Apace Vision LED сигурносна светла и заштитна G3X задња светла - упутство за употребу

Увод

This manual provides detailed instructions for the safe and effective use of your Apace Vision LED Safety Lights and Guard G3X Tail Light. These products are designed to enhance visibility and safety during various activities such as cycling, running, and walking. Please read this manual thoroughly before first use and retain it for future reference.

Безбедносне информације

• Always ensure lights are securely attached before use.
• Do not look directly into the LED lights to avoid eye strain.
• Чувати ван домашаја деце.
• Одложите батерије одговорно у складу са локалним прописима.
• While these lights enhance visibility, they do not replace the need for caution and adherence to traffic laws.

Садржај пакета

Проверите да ли су све ставке присутне у вашем пакету:

• 2к ЛЕД сигурносна светла
• 1x Guard G3X Tail Light (or Guard G3X Pro 100)
• Extra Batteries (for LED Safety Lights)
• Straps (2 Short, 1 Long)
• 1к мини одвијач
• USB Charging Cable (for Guard G3X Tail Light)
• Mounting O-rings (for Guard G3X Tail Light)
• Упутство за употребу

Image: Contents of the Apace Vision LED Safety Lights package.

Image: Contents of the Apace Vision Guard G3X Pro 100 Tail Light package.

Подешавање и инсталација

For LED Safety Lights:

1. Инсталација батерије: Use the provided mini-screwdriver to open the battery compartment. Insert the included batteries, ensuring correct polarity. Close the compartment securely.
2. Прилог: These lights feature a clip-on design. Securely attach them to your belt, pockets, running gear, helmet, backpack, reflective vest, dog collars/leashes, or smartphone armband. For bike use, utilize the provided straps to fasten them to handlebars or seat posts.

Image: LED Safety Lights in use, demonstrating attachment to clothing.

For Guard G3X Tail Light:

1. Монтажа: Use the provided rubber O-rings to securely attach the tail light to your bicycle's seat post or frame. Ensure the light is facing backward and is stable.

Image: Guard G3X Tail Light mounted on a bicycle.

Упутство за употребу

General Operation (Both Lights):

1. Укључивање/искључивање: To turn the unit on or off, САЧЕКАЈ the power button for 3 seconds. A short press will not activate or deactivate the device.
2. Промена режима: Once the light is on, press the power button briefly to cycle through the available lighting modes.

LED Safety Lights Modes:

These lights offer 3 powerful lights per device and 3 eye-catching lighting modes:

• Мирно
• Споро трепери
• Фаст Фласх

Some models may also feature multiple color options (red, green, blue) and multicolor strobe modes.

Image: Available lighting modes for LED Safety Lights.

Guard G3X Tail Light Modes:

The Guard G3X Tail Light (including Pro 100 version) typically offers various steady and flashing modes designed for maximum rear visibility. Refer to the specific product packaging or quick start guide for a detailed list of modes for your model.

Image: Guard G3X Pro 100 Tail Light in use, showing 100 Lumen output.

Charging (Guard G3X Tail Light)

The Guard G3X Tail Light is USB rechargeable. When the battery is low, connect the light to a standard USB port using the provided USB charging cable. A charging indicator light will typically show red while charging and turn green or off when fully charged. Charging time may vary.

Одржавање

• Чишћење: Обришите светла меком крпомamp тканина. Немојте користити абразивна средства за чишћење или раствараче.
• Складиштење: Чувајте светла на хладном и сувом месту када се не користе.
• Battery Replacement (LED Safety Lights): Replace batteries as needed. Ensure to use the correct battery type (e.g., CR2032) and dispose of old batteries properly.
• Отпорност на воду: Both lights feature robust, weather-resistant casing (Guard G3X Pro 100 is IPX5 rated). While designed to withstand rain, avoid submerging them in water.

Решавање проблема

• Светло се не укључује:
  • Ensure the power button is HELD DOWN for 3 seconds да се активира.
  • Check batteries for LED Safety Lights; replace if necessary.
  • Charge the Guard G3X Tail Light if the battery is depleted.
• Светло трепери или је пригушено:
  • Replace batteries (LED Safety Lights) or recharge (Guard G3X Tail Light).
• Light not attaching securely:
  • Ensure clips or straps are properly engaged and tightened.
  • Inspect straps/O-rings for wear and tear; replace if damaged.

Спецификације

Гаранција и подршка

Apace Vision products are designed for durability and performance. Your purchase is typically covered by a 30-day return policy and a 1-year warranty against manufacturing defects. For detailed warranty information, product support, or to contact customer service, please visit the official Apace Vision store or webсајт:

Visit the Apace Vision Store