YAMRON 4-in-1 Soil Moisture Meter

1. Увод

The YAMRON 4-in-1 Soil Moisture Meter is a versatile tool designed to help you monitor the health of your plants by providing accurate readings of key soil and environmental parameters. This device integrates four essential functions: soil moisture, soil pH, soil temperature, and sunlight intensity, all displayed on a clear, backlit LCD screen.

Understanding these factors is crucial for successful plant cultivation, whether in gardens, farms, potted plants, or orchards. This manual provides detailed instructions on how to set up, operate, and maintain your soil tester to ensure optimal performance and longevity.

2. Безбедносне информације

• Do not use this device to test pure water or other liquids. It is designed specifically for soil.
• Do not force the probe into dry, hard soil or touch hard objects, as this may damage the probe.
• Ensure the probe is inserted into the soil at a depth of more than 4 inches (10 cm) for accurate readings.
• Do not leave the meter in the soil for extended periods. Remove and clean after each use.
• Држите уређај ван домашаја деце.
• Чувати на хладном и сувом месту када се не користи.

3. Садржај пакета

• 1 x YAMRON 4-in-1 Soil Moisture Meter
• 1 к Упутство за употребу

Note: AAA 1.5V batteries (4 required) are not included and must be purchased separately.

4. Производ је готовview

The YAMRON Soil Moisture Meter features a robust design with a long probe for deep soil penetration and a clear LCD display for easy reading.

Слика 4.1: Предња страна view of the YAMRON 4-in-1 Soil Moisture Meter, highlighting its digital display and probe.

Слика 4.2: Завршеноview of the meter's four primary functions: Light, Soil pH, Temperature, and Soil Moisture, with corresponding icons.

Кључне компоненте:

• ЛЦД екран: Large, backlit screen for clear readings in various lighting conditions.
• сонда: Long, durable metal probe for insertion into soil.
• PH Button: Used to switch to pH measurement mode.
• Дугме °Ц/°Ф: Used to switch between Celsius and Fahrenheit temperature units, and also for powering off the device (long press).
• Светлосни сензор: Located on the top of the device, measures ambient light intensity.

5. Подешавање

Инсталација батерије:

1. Пронађите одељак за батерију на задњој страни уређаја.
2. Отворите поклопац одељка за батерије.
3. Insert 4 x AAA 1.5V batteries, ensuring correct polarity (+/-).
4. Добро затворите поклопац одељка за батерије.

The device will alert you when the battery is low.

6. Упутство за употребу

Пратите ове кораке за тачна мерења:

1. Remove the red protective cap from the end of the probe.
2. If the soil is very dry, water the soil test area and wait for 10 minutes before testing. This prevents damage to the probe and ensures accurate readings.
3. Insert the probe into the soil vertically, ensuring it is buried about 4 inches (10 cm) deep. Make sure the probe is in full contact with the soil.
4. Wait approximately 10 seconds for the readings to stabilize on the LCD display.
5. Read the displayed data for moisture, temperature, and sunlight intensity.
6. To measure pH, press the "PH" button. The display will switch to show the pH value.
7. To switch between Celsius (°C) and Fahrenheit (°F) for temperature, press the "°C/°F" button.
8. For soil pH and moisture, it is recommended to take readings from at least 5 different locations in the soil and calculate the average for a more representative result.
9. After use, gently remove the probe from the soil.

Figure 6.1: Visual guide demonstrating the four steps for using the soil tester: remove cap, insert probe, read data, and clean.

Разумевање читања:

Figure 6.2: Explanation of the different measurement scales for light intensity, soil temperature, pH, and moisture levels.

• Light Intensity (0-9999 Lux): Indicates the amount of sunlight.
• Soil Temperature (0°C/32°F to 97°C/197°F): Optimal temperature ranges vary by plant type.
• Soil pH (Range 3-9):
• 3-4: Strongly Acidic
• 5-6: Slightly Acidic
• 7: Неутрално
• 8-9: Slightly Alkaline
• Soil Moisture (5 levels):
• 5-20%: DRY- (Very Dry)
• 20-40%: DRY+ (Dry)
• 40-60%: NOR (Normal)
• 60-80%: WET- (Wet)
• 80-95%: WET+ (Very Wet)

Искључивање:

Long press the "°C/°F" button to power off the device.

7. Одржавање

• Чишћење: After each use, wipe the probe clean with a soft, dry cloth. Do not use abrasive cleaners or immerse the main unit in water.
• Складиштење: Store the meter in a dry place, away from direct sunlight and extreme temperatures. Replace the protective cap on the probe when not in use.
• Замена батерије: Замените батерије када се на екрану појави индикатор празне батерије. Извадите батерије ако уређај неће бити коришћен дуже време како бисте спречили цурење.

Figure 7.1: Important usage and maintenance notes for the soil tester.

КСНУМКС. Решавање проблема

9. Спецификације

10. Гаранција и подршка

YAMRON products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official YAMRON store on Amazon.

For further assistance, you may contact the seller, Cytentech, through the Amazon platform.

We are committed to providing customers with satisfactory service. If you have any dissatisfaction with the product, please contact us.