Heltec HT-CC20ABP 9-99V 20A Тестер капацитета пуњења/пражњења - упутство за употребу

1. Увод

This manual provides essential information for the safe and effective operation of your Heltec HT-CC20ABP Charge/Discharge Capacity Tester. This device is designed for testing the charge and discharge capacity of various battery types, including Lipo, LiFePO4, and Lead Acid battery packs, within a voltage range of 9-99V and a current capacity of 20A.

Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance.

Figure 1: Heltec HT-CC20ABP Capacity Tester and accessories, including power cable and battery connection cables.

2. Производ је готовview

2.1 Кључне карактеристике

• Model: HT-CC20ABP
• Charging Test Cut-off Voltagе: 9-99В
• Charging Test Voltagе: 9-99В
• Discharge Current: 0.5V-20A
• Charge Current: 0.1-10A
• Charge Stepping Current: 0.1A
• Discharge Stepping Current: 0.1A

2.2 Компоненте и контроле

The Heltec HT-CC20ABP features a clear LCD display, control knob, and essential ports for operation.

Figure 2: Front and Back Panel Illustration. Key components include Output Port, LCD, Start Button, Switching/Setting Button, Power Socket, and Switch.

Слика 3: Предња страна view of the tester, showing the display, control knob, and connection port.

Слика 4: Задња страна view of the tester, highlighting the cooling fans for heat dissipation during operation.

3. Подешавање

3.1 Распакивање и преглед

Carefully unpack the capacity tester and all accessories. Verify that all components listed in the 'What's in the Box' section are present and undamaged. If any items are missing or damaged, contact customer support immediately.

3.2 Повезивање тестера

1. Place the tester on a stable, flat surface with adequate ventilation.
2. Connect the provided power cable to the power socket on the rear of the tester and then to a suitable power outlet.
3. Connect the battery connection cables (red for positive, black for negative) to the battery pack you intend to test. Ensure a secure connection.
4. Connect the other end of the battery connection cables to the output port on the front of the tester. Observe polarity carefully.

Figure 5: The capacity tester connected to a battery pack, ready for testing.

Figure 6: Close-up of the tester's connection cables and clamps, illustrating proper attachment points.

4. Упутство за употребу

4.1 Powering On and Initial Display

After connecting the power and battery, switch on the tester using the power switch on the rear panel. The LCD display will illuminate, showing initial parameters.

Слика 7: Детаљно view of the LCD screen, showing current voltage, current, time, and capacity readings.

4.2 Подешавање параметара теста

1. Use the 'SET' button and control knob to navigate through the menu and adjust parameters such as charging voltagе, обујмtage, charge current, and discharge current.
2. Refer to the battery manufacturer's specifications for appropriate voltagе и тренутна подешавања.
3. Confirm settings before starting any test.

4.3 Покретање теста

Once parameters are set, press the 'START' button to begin the charge or discharge cycle. The display will show real-time data including current voltage, current, elapsed time, and accumulated capacity.

4.4 Monitoring and Data Logging

The tester can be connected to a computer for advanced monitoring and data logging using dedicated software. This allows for detailed analysis of battery performance over time.

Figure 8: Software interface displaying real-time test data in a list format.

Figure 9: Software interface providing data analysis and summary, including graphical representations of test results.

5. Одржавање

5.1 Чишћење

Regularly clean the exterior of the tester with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure no liquids enter the device.

5.2 Вентилација

Ensure that the cooling vents on the rear of the unit are not obstructed. Proper airflow is crucial for maintaining optimal operating temperature and preventing overheating.

5.3 Складиштење

When not in use, store the tester in a cool, dry place away from direct sunlight and extreme temperatures. Disconnect all cables before storage.

КСНУМКС. Решавање проблема

6.1 Нема напајања

• Check if the power cable is securely connected to both the tester and the power outlet.
• Уверите се да је прекидач за напајање на задњој плочи у положају „УКЉУЧЕНО“.
• Проверите да ли је утичница функционална тако што ћете је тестирати са другим уређајем.

6.2 Incorrect Readings

• Ensure battery connection cables are correctly attached with proper polarity (red to positive, black to negative).
• Check for loose connections at both the battery and the tester's output port.
• Verify that the test parameters (voltage, current) are set correctly according to the battery specifications.

6.3 Tester Overheating

• Ensure the tester is placed in a well-ventilated area.
• Check that the cooling vents on the rear are not blocked.
• Reduce the test current if possible, especially during prolonged discharge cycles.

7. Спецификације

7.1 Шта је у кутији

• Heltec HT-CC20ABP Capacity Tester
• Повер Цабле
• Battery Connection Cables with Clamps

8. Гаранција и подршка

For warranty information and technical support, please refer to the official Heltec BMS webсајт или контактирајте овлашћеног продавца. Сачувајте рачун као доказ о куповини.

Manufacturer: heltec bms

Date First Available: August 28, 2024