1. Готовоview
The Varstrom Tong-Sheng 48V 750W Mid Drive E-Bike Conversion Kit transforms your standard bicycle into a high-performance electric bike. Designed for versatility, this kit provides powerful assistance for various terrains, from city commuting to challenging mountain trails. Its integrated torque sensor ensures a natural and responsive riding experience, adapting motor assistance to your pedaling force.
This kit is compatible with most standard bikes featuring a 68-73mm bottom bracket and 34-36mm inner diameter, making it a DIY-friendly solution for e-bike enthusiasts.
Video: Tong-Sheng Mid Drive Motor Kit OverviewОвај видео пружа општи прегледview of the Tong-Sheng mid-drive motor kit and its capabilities.
2. Подешавање и инсталација
Before beginning installation, ensure your bicycle is clean and stable. Gather all components from the packing list and necessary tools.
2.1. Листа паковања
Your kit includes the following components:
- TSDZ8 48V 750W Mid Drive Motor
- SWM58 Display
- 1T4 Main Wire Harness
- Тхумб Тхроттле
- 44Т Цхаинринг
- Спеед Сенсор
- Вренцх
- Brake Levers (Optional)
- Цранк Армс
- Васхерс
Image: Packing List. This image displays all the components included in the Varstrom Tong-Sheng 48V 750W Mid Drive E-Bike Conversion Kit.
2.2. Кораци пре инсталације
- Remove your bike's existing crankset, chainring, and bottom bracket.
- Clean the bottom bracket shell thoroughly.
- Ensure your bike's bottom bracket dimensions are compatible (68-73mm width, 34-36mm inner diameter).
Image: Motor Compatibility and Specifications. This image illustrates the dimensions and compatibility requirements for the mid-drive motor.
2.3. Инсталација мотора
- Attach the 44T chainring to the mid-drive motor using the provided bolts.
- Carefully slide the motor assembly into the bottom bracket shell of your bike frame.
- Secure the motor using the Y-shaped motor mount bracket on the left side of the bike. Tighten the fixing nut with 40Nm force.
- Install the crank arms onto the motor spindle and secure them.
- Install the chain, ensuring proper tension.
2.4. Инсталација компоненте
- Сензор брзине: Mount the speed sensor on the rear chainstay, ensuring the magnet on the wheel spoke passes within 10-15mm of the sensor.
- Полуге кочнице: Replace your existing brake levers with the provided ones, which include motor inhibitor sensors.
- Палац гаса: Install the thumb throttle on your handlebar.
- SWM58 Display: Mount the SWM58 display on your handlebar in a comfortable viewинг положај.
- Ожичење: Connect all components (motor, display, throttle, brake levers, speed sensor) using the 1T4 main wire harness. Ensure all connections are secure and waterproof. Use zip ties to manage cables neatly along the frame.
- батерија: Install the battery mount on your bike frame (if applicable) and then slide the battery onto the mount.
Video: BAFANG BBS Mid Drive Motor for eBike - Installation Video. This video demonstrates the detailed installation process for a mid-drive motor kit.
Video: Ebike Conversion Kit Installation. This video provides a general guide on installing an e-bike conversion kit.
3. Упутство за употребу
3.1. SWM58 Display Functions
The SWM58 display provides essential information and control over your e-bike system:
- Укључивање/искључивање: Притисните и држите дугме за напајање да бисте укључили или искључили систем.
- брзина: Displays current speed (KM/H or MPH).
- Ниво батерије: Приказује преостало пуњење батерије.
- Нивои помоћи: Adjust pedal-assist levels (3 or 5 levels available) to control motor assistance.
- Путовање/ОДО: View current trip distance or total odometer reading.
- Кодови грешака: Displays error codes if any system malfunctions occur.
- Индикатор фарова: Indicates if the headlight is on.
- Индикатор кочнице: Shows when brakes are engaged.
Image: SWM58 Display. This image details the features and specifications of the SWM58 display unit.
3.2. Режими вожње
- Режим асистенције педала: The motor provides assistance as you pedal. Adjust the assist level via the SWM58 display.
- Режим гаса: Use the thumb throttle for power on demand, without pedaling.
4. Одржавање
Редовно одржавање осигурава дуготрајност и оптималне перформансе вашег комплета за конверзију електричног бицикла.
- Одржавање батерије: Charge the battery regularly, even when not in use, to maintain its health. Store the battery in a cool, dry place. Avoid fully discharging the battery.
- Motor & Drivetrain: Keep the motor and chainring clean. Lubricate the chain regularly. Check for any loose bolts or connections on the motor and other components.
- кочнице: Periodically check brake pads for wear and ensure brake levers are functioning correctly.
- Каблови: Inspect all cables for wear, damage, or loose connections. Ensure they are securely fastened to the frame.
КСНУМКС. Решавање проблема
If you encounter issues with your e-bike kit, refer to the SWM58 display for any error codes. Common issues and their potential solutions are listed below:
- Мотор се не укључује: Check all cable connections, especially the main power cable and motor sensor. Ensure the battery is charged and properly seated. Verify that the brake levers are not stuck in the engaged position.
- Екран се не укључује: Check battery connection and charge level. Inspect the display cable for damage.
- Недоследна снага: Ensure the speed sensor is correctly aligned with the magnet (10-15mm gap). Check for loose connections in the motor or display wiring.
- Кодови грешака: Consult the SWM58 display manual for specific error code meanings and troubleshooting steps.
6. Спецификације
6.1. Спецификације мотора
Image: Motor Compatibility and Specifications. This image provides a visual and tabular breakdown of the motor's technical data.
| Феатуре | Валуе |
|---|---|
| Ратед Волtage | 48В |
| Називна снага | 750В |
| Максимални обртни момент | >120Н.м |
| Мак Спеед | ~50км/х |
| Сензор педале | Speed and Torque Integrated |
| Схафт Стандард | ЈИС |
| Величина (Д*Ш*В) | 126*170*204mm (4.96*6.69*8.03inch) |
| Тежина | 4.8 кг |
| Ефикасност | >80% |
| Ноисе Граде | <55дБ |
| Bike Recommendation | E-Trekking/E-city / E-tour |
6.2. SWM58 Display Specifications
Image: SWM58 Display. This image details the features and specifications of the SWM58 display unit.
| Феатуре | Валуе |
|---|---|
| Екран | 3.8 inch High-Brightness Color LCD |
| Димензије (Д*Ш*В) | 93.4 мм к 56.4 мм к 6.4 мм |
| Јединица за брзину | КМХ/МПХ |
| Оператинг Волtages | 24В, 36В, 48В, 52В |
| Подешавање ограничења брзине | 0 to 100km/h |
| Handlebar Mounting Diameter | 31.8mm/25.4mm/22.2mm (Bottom only supports 22.2mm) |
| Нивои помоћи | 3, 5 |
6.3. Battery Specifications (Optional)
Image: Battery Specification. This image provides detailed specifications for various optional battery configurations.
| Феатуре | Валуе |
|---|---|
| Батерија | 48В 17.5Ах |
| Енергија | 840Вх |
| Целл | Grade A 18650 3500mAh |
| БМС заштита | 30А |
| УСБ порт | 5В 1А |
| Температура пуњења | 0-45°Ц |
| Температура испуштања | -15-65°Ц |
| Величина | 368*90*111 мм |
| Тежина | Око 4 кг |
| Цицле Лифе | >1000 пута |
| Compatible Motor Power | 250В 350В 500В 750В 1000В 1200В 1500В |
| Функција заштите | Оверцуррент Протецтион, Оверволtage Protection, Overload Protection, Overcharge Protection, Overdischarge Protection, Temperature Protection, Short Circuit Protection, Cell Voltagе Балансирање |
7. Гаранција и подршка
Varstrom products are designed for durability and performance. For warranty information, please refer to the specific warranty card included with your product or visit the official Varstrom webсајту.
For technical support, troubleshooting assistance, or any questions regarding your e-bike conversion kit, please contact Varstrom customer service through the retailer where you purchased the product or via the contact information provided in your product documentation.
Такође можете посетити Varstrom Store on Amazon за додатне ресурсе и информације о производу.