ZMJH 236 Bidet Toilet Seat User Manual

Увод

Thank you for choosing the ZMJH 236 Elongated Smart Bidet Toilet Seat. This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your new bidet toilet seat. Please read this manual thoroughly before installation and use, and retain it for future reference.

Figure 1: ZMJH 236 Elongated Smart Bidet Toilet Seat

Безбедносне информације

Да бисте осигурали безбедан рад, увек следите ове основне мере предострожности:

• електрична безбедност: Ensure the bidet seat is connected to a properly grounded outlet. Do not use extension cords. Disconnect power before cleaning or servicing.
• Прикључак за воду: Turn off the main water supply to the toilet before installation. Ensure all connections are secure to prevent leaks.
• Подешавања температуре: Exercise caution when adjusting water and seat temperatures, especially for children, the elderly, or individuals with sensitive skin.
• Чишћење: Use only mild, non-abrasive cleaners. Do not immerse the unit in water or spray water directly onto electrical components.
• Надзор: Неопходан је пажљив надзор када овај производ користе или у близини деца или особе са инвалидитетом.

Садржај пакета

Пре почетка инсталације проверите да ли су све компоненте присутне:

Figure 2: Included components for ZMJH 236 Bidet Toilet Seat. Includes Smart Bidet Seat, Instruction Manual, Screws, Gaskets, Steel Discs, Mounting Plate, Anchoring Rubbers, Three-way Valve, and PE Pipe.

• 1x Smart Bidet Seat
• 1к Упутство за употребу
• 1к Упутство за инсталацију
• 2к Сцревс
• 2к Гаскетс
• 2x Steel Discs
• 1к Монтажна плоча
• 2x Anchoring Rubbers
• 1x Three-way Valve (7/8" to 1/4" to 7/8")
• 1x PE Pipe

Упутство за инсталацију

Follow these steps for proper installation. Professional assistance is not typically required.

Провера пре инсталације:

• Ensure your toilet is an elongated shape for proper fit.
• Verify there is an electrical outlet near the toilet.
• Искључите довод воде у тоалет пре него што почнете.

Кораци инсталације:

Figure 3: Step 1 - Remove the existing toilet seat by unscrewing the bolts from underneath.

Step 1: Remove Existing Toilet Seat. Lift the hinge covers and use a screwdriver to remove the mounting bolts. Remove the old toilet seat and lid.

Figure 4: Step 2 - Install the mounting plate onto the toilet bowl using the provided screws and gaskets.

Step 2: Install Mounting Plate. Place the mounting plate over the toilet bowl holes. Insert the anchoring rubbers into the holes, then secure the steel discs and screws. Tighten with a screwdriver.

Figure 5: Step 3 - Slide the bidet toilet seat onto the installed mounting plate until it clicks into place.

Step 3: Attach Bidet Seat. Align the bidet seat with the mounting plate and slide it forward until it locks securely into place.

Figure 6: Step 4 - Connect the T-valve to the toilet tank's water inlet. Ensure a tight seal.

Step 4: Connect T-Valve. Disconnect the existing water supply hose from the toilet tank. Install the provided T-valve (7/8" to 1/4" to 7/8") to the toilet tank's water inlet. Reconnect the toilet's water supply hose to the bottom of the T-valve.

Figure 7: Step 5 - Connect the PE pipe from the T-valve to the bidet seat's water inlet.

Step 5: Connect PE Pipe. Connect one end of the PE pipe to the 1/4" outlet on the T-valve and the other end to the water inlet on the bidet seat. Ensure all connections are hand-tightened, then use a wrench for a final snug fit, being careful not to overtighten.

Након инсталације:

• Slowly turn on the main water supply to the toilet. Check for any leaks.
• Укључите кабл за напајање седишта бидеа у уземљену електричну утичницу.

Видео за инсталацију:

Operating Instructions & Features

Your ZMJH 236 bidet toilet seat offers a range of features for enhanced comfort and hygiene. All functions are controlled via the side panel.

Контролна табла је завршенаview:

Figure 8: Side control panel with buttons for various functions including Stop, Light, Rear Wash, Front Wash, Air Dry, Power, Seat Temperature, Water Temperature, Nozzle Position, and Water Pressure/Air Dryer Temperature.

• Stop/Light: Stops all active functions and controls the LED night light.
• Прање задњег дела: Activates the posterior cleansing function.
• Front Wash (Bidet): Activates the feminine cleansing function.
• Сушење на ваздуху: Initiates the warm air drying cycle (3 minutes duration).
• Снага: Укључује/искључује уређај.
• Температура седишта: Adjusts the heated seat temperature (3 settings).
• Температура воде: Adjusts the water heater temperature (3 settings).
• Nozzle Position (FR/BK): Подешава положај млазнице напред/назад.
• Water Pressure/Air Dryer Temp (HI/LO): Adjusts water pressure and warm air dryer levels (3 levels).

Кључне карактеристике:

Figure 9: Adjustable wash modes including Rear Wash, Front Wash, Oscillating Wash, and Self-cleaning Nozzle.

Adjustable Washes: Features Rear Wash, Front Wash, and Oscillating Wash for thorough cleansing. The stainless steel nozzle is self-cleaning for optimal hygiene.

Figure 10: Visual representation of adjustable warm air drying, water temperature settings (93°F to 104°F), and heated seat temperature settings (89°F to 100°F).

Контрола температуре: Enjoy a heated seat with 3 temperature settings, warm water with 3 temperature settings, and a warm air dryer with 3 different levels. The hybrid heating technology ensures continuous warm water.

Figure 11: The bidet seat features a slow-closing seat and lid to prevent slamming, and an illuminating blue LED nightlight for convenience in the dark.

Споро затварање седишта и поклопца: Designed to close slowly and quietly, preventing slamming and extending product life.
Illuminating LED Nightlight: A cool blue LED nightlight provides subtle illumination for nighttime use.

Operation Demonstration Video:

Одржавање

Regular cleaning and maintenance will ensure the longevity and optimal performance of your bidet toilet seat.

• Дневно чишћење: Обришите спољашње површине меком, дamp cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads.
• Чишћење млазница: The stainless steel nozzle has a self-cleaning function. For deeper cleaning, gently pull out the nozzle and wipe it with a soft cloth. Do not use excessive force.
• Чишћење филтера: Periodically check and clean the water inlet filter to prevent clogging and maintain water pressure. Refer to the detailed instruction manual for filter access.
• Зимовање (ако је применљиво): If the unit will be exposed to freezing temperatures, ensure all water is drained from the bidet seat and pipes to prevent damage.

Решавање проблема

Ако наиђете на проблеме, испробајте ове уобичајене кораке за решавање проблема пре него што контактирате подршку:

For more detailed troubleshooting or issues not listed here, please refer to the full instruction manual or contact ZMJH customer support.

Спецификације

Гаранција и подршка

ZMJH stands behind the quality of its products. For warranty information, product registration, or technical support, please refer to the warranty card included in your package or visit the official ZMJH webсајт. Молимо вас да имате при руци број модела (236) и датум куповине када контактирате подршку.

For additional resources and FAQs, you may visit the ZMJH Store on Amazon.