be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your be quiet! Pure Base 501 Airflow Window Black ATX Mid-Tower PC Case. Designed for optimal cooling and quiet operation, this case supports a wide range of components and offers a clean, stylish aesthetic with its tempered glass side panel and mesh front.

2. Безбедносне информације

• Always disconnect the power supply from the wall outlet before performing any installation or maintenance inside the PC case.
• Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
• Be cautious of sharp edges inside the case.
• Do not obstruct ventilation openings. Ensure adequate airflow around the case.
• Keep the case away from direct sunlight, heat sources, and liquids.
• Овај производ је намењен само за унутрашњу употребу.

3. Садржај пакета

Проверите да ли су све компоненте присутне у пакету:

• be quiet! Pure Base 501 Airflow Window Black PC Case
• 2x pre-installed be quiet! Pure Wings 3 PWM 140mm fans (1x front, 1x rear)
• Кутија за додатну опрему која садржи:
  • Various screws for motherboard, SSDs, HDDs, and power supply
  • Везице за каблове
  • Упутство за употребу

4. Подешавање и инсталација

Follow these steps to install your PC components into the Pure Base 501 Airflow Window case.

4.1. Припрема случаја

• Поставите кућиште на стабилну, равну површину.
• Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully pulling the panel away.
• Remove the solid steel side panel (opposite side) by unscrewing the thumb screws and sliding it backward.
• The front mesh panel can be removed by pulling it from the bottom edge to access front fan mounts.
• The top panel can be removed to access top fan/radiator mounts.

4.2. Инсталација матичне плоче

• Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). The case comes with pre-installed standoffs for ATX.
• Инсталирајте И/О штит у задњи отвор кућишта.
• Пажљиво поставите матичну плочу на одстојнике, поравнавајући рупе за вијке.
• Secure the motherboard with the appropriate screws from the accessory box.

4.3. Инсталација јединице за напајање (PSU)

• Mount the PSU to the bracket at the rear bottom of the case.
• Slide the PSU with the bracket into the PSU shroud from the rear of the case.
• Secure the PSU bracket with screws.

4.4. Инсталација уређаја за складиштење података

• 3.5" HDD-ови: Install up to two 3.5" drives in the removable HDD cage located under the PSU shroud. Slide the drives into the trays and secure them.
• 2.5" SSDs/HDDs: Install up to five 2.5" drives. Two mounts are located behind the motherboard tray, and three can be installed on the HDD cage. Secure drives with screws.

4.5. Инсталација графичке картице (VGA) и картице за проширење

• Уклоните потребне поклопце слотова за проширење на задњој страни кућишта.
• Insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
• Причврстите картице завртњима.

4.6. Уградња вентилатора и радијатора

• The case comes with two 140mm Pure Wings 3 PWM fans pre-installed (one front, one rear).
• Фронт: Supports 2x 140mm or 3x 120mm fans. Radiators up to 360mm.
• Врх: Supports 2x 140mm or 2x 120mm fans. Radiators up to 140mm.
• позади: Supports 1x 140mm or 1x 120mm fan. Radiators up to 140mm.
• Ensure fans are oriented correctly for optimal airflow (intake at front, exhaust at rear/top).

4.7. Повезивање предњих И/О портова

• Connect the USB 3.2 Gen.2 Type C, USB 3.2 Type A (x2), HD Audio, power switch, reset button, and HDD indicator cables from the front panel to the corresponding headers on your motherboard.

4.8. Менаџмент каблова

• Utilize the cable routing cutouts and Velcro straps behind the motherboard tray to organize cables. This improves airflow and aesthetics.
• Ensure no cables interfere with fan blades.

5. Operating the PC Case

Once all components are installed and connected, replace the side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front panel to start your system.

• The Pure Base 501 Airflow Window is designed for high airflow, ensuring efficient cooling for your components.
• The pre-installed Pure Wings 3 PWM fans offer a balance of performance and quiet operation.
• Monitor your system temperatures using software to ensure optimal performance.

6. Одржавање

Редовно одржавање помаже у обезбеђивању оптималних перформанси и дугог века трајања компоненти вашег рачунара.

• Филтери за прашину: The case features removable dust filters on the front, top, and bottom. Regularly clean these filters by removing them and gently brushing or washing off accumulated dust. Ensure they are completely dry before re-installing.
• Унутрашње чишћење: Periodically open the case and use compressed air to remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Спољно чишћење: Обришите спољашње површине меком, дamp крпа. Избегавајте јаке хемикалије или абразивне материјале.

КСНУМКС. Решавање проблема

Ако наиђете на проблеме, погледајте следеће уобичајене кораке за решавање проблема:

For further assistance, please contact be quiet! customer support.

8. Спецификације

9. Гаранција и подршка

Your be quiet! Pure Base 501 Airflow Window PC Case comes with a Двогодишња гаранција произвођача од дана куповине. Ова гаранција покрива недостатке у материјалу и изради при нормалној употреби.

For warranty claims, technical support, or any questions regarding your product, please visit the official be quiet! website or contact their customer service department. Please have your proof of purchase and product model information ready when contacting support.

Official be quiet! Webсајт: ввв.бекуиет.цом