1. Увод
The Aideepen 360W USB C Tester Meter is a versatile device designed for real-time monitoring and testing of USB Type-C power delivery. It accurately measures voltage, current, power, capacity, energy, temperature, and timing, providing essential data for evaluating the performance of chargers, power banks, and connected devices. This manual provides detailed instructions for its proper use and maintenance.
2. Карактеристике производа
- 360W USB C Tester: Checks charging performance of various power sources (wall, car, solar panel chargers) and USB charging cables. Measures voltage from 4V to 30V and current from 0A to 12A.
- Подржава вишеструке протоколе пуњења: Compatible with PD2.0, PD3.0, PPS, QC2.0, QC3.0, FCP, SCP, AFC, PE, DASH VOOC, and Super VOOC.
- Свеобухватни приказ параметара: Shows instantaneous voltage, current, power, and temperature. Also calculates continuous operation time, consumed power, and records maximum voltage, current, and power for the entire charging process.
- Type-C Multi-meter Functionality: For accurate capacity testing, fully charge the power source, insert the USB C voltage meter, double-click the button to clear previous data, then connect the mobile phone or load. Continuous discharge is required for accurate capacity measurement.
- Data Storage Function: Features a built-in memory chip that automatically restores previous test data if the device is accidentally disconnected during testing.
Figure 2.1: Real-time monitoring features of the USB C Tester.
3. Садржај пакета
Проверите да ли су све ставке присутне у пакету:
- Aideepen 360W USB C Tester Meter (KWS-2303CJP)
- Упутство за употребу
4. Подешавање
To begin using your Aideepen USB C Tester Meter, follow these steps:
- Connect the male Type-C port of the tester to a USB Type-C power source (e.g., wall charger, power bank, laptop port).
- Connect your device (e.g., smartphone, tablet, laptop) to the female Type-C port of the tester using a compatible USB Type-C cable.
- The tester's display will automatically light up and begin showing real-time measurement data.
Video 4.1: Demonstration of connecting the USB C Tester to a power source and a device. This video shows the physical connection process and initial display.
Слика 4.1: Прample setup showing bidirectional current measurement with two testers.
5. Упутство за употребу
The Aideepen USB C Tester features a single button for controlling its functions.
5.1. Display Mode Switching
Press the button once to cycle through different display screens, showing various parameters such as voltage, current, power, capacity, energy, temperature, and timing data.
5.2. Screen Rotation
Double-click the button to rotate the display orientation by 180 degrees, allowing for convenient viewing regardless of the tester's physical orientation.
Figure 5.1: Double-click the button to rotate the display.
Слика 5.2: Завршеноview of display modes and button operations.
5.3. Data Reset
To reset accumulated data (mAh, mWh, or timing), press and hold the button for approximately 3 seconds until the display clears or resets the desired parameter.
6. Display Parameters Overview
The tester's display provides a wealth of information. Here is a breakdown of the key parameters:
Figure 6.1: Detailed display parameters and their indicators.
Figure 6.2: Table of display parameters.
7. Спецификације
| Параметар | Валуе |
|---|---|
| Бранд | Аидеепен |
| Број модела | KWS-2303CJP |
| Минимум Оператинг Волtage | 4 Волтс |
| Волtagе Опсег мерења | 4В-30В |
| Опсег мерења струје | 0-12А |
| Опсег мерења снаге | 0-360В |
| Опсег мерења капацитета | 0-666666мАх |
| Опсег мерења енергије | 0-999999Вх |
| Временски опсег | 0-99 сати |
| Гаранција | 180 дана |
| Порекло | Кина |
КСНУМКС. Решавање проблема
- Display not lighting up when connected to PD power only: The tester requires a load (a device to be charged) to fully activate the display when connected to certain power delivery sources. Connect a device to the output port.
- Small current detected without a connected load: It is normal for the product to have a small idle current (typically 0.01-0.02A). To eliminate this, ensure no load is connected, then press and hold the button. Connect a Type-C 5V source to the female port. Release the button when the display shows 'CAL'. The machine will then automatically eliminate the idle current.
- Button responsiveness issues: If the button is unresponsive or overly sensitive, ensure firm and deliberate presses. Repeatedly pressing the button quickly may sometimes cause unexpected behavior.
9. Одржавање
To ensure the longevity and accuracy of your Aideepen USB C Tester Meter, follow these maintenance guidelines:
- Држите уређај сувим и даље од влаге.
- Избегавајте излагање уређаја екстремним температурама.
- Очистите екран и цasinОбришите меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
- Чувајте уређај на безбедном месту када га не користите како бисте спречили физичка оштећења.
10. Гаранција и подршка
The Aideepen 360W USB C Tester Meter comes with a 180-дневна гаранција од датума куповине. Ова гаранција покрива производне недостатке и кварове при нормалној употреби.
For technical support, warranty claims, or any questions regarding your product, please contact Aideepen customer service through the retailer where you purchased the device. Please provide your purchase details and model number (KWS-2303CJP) for faster assistance.