Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function

1. Увод

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Fein 18V AS 4-Speed Cordless Drill/Driver Set with Hammer Function, model ASCM18-4 QMP AS. Please read these instructions thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

2. Безбедносне информације

Увек се придржавајте основних мера предострожности како бисте смањили ризик од пожара, струјног удара и повреда. Сачувајте ово упутство за будуће потребе.

• Безбедност на радном месту: Радно место одржавајте чистим и добро осветљеним. Не користите електричне алате у експлозивним атмосферама, као што је присуство запаљивих течности, гасова или прашине.
• електрична безбедност: Избегавајте контакт тела са уземљеним површинама. Не излажите електричне алате киши или влажним условима.
• Лична безбедност: Always wear eye protection, hearing protection, and suitable work clothing. Stay alert and use common sense when operating a power tool.
• Употреба и одржавање алата: Не форсирајте електрични алат. Користите одговарајући електрични алат за вашу примену. Искључите батерију из електричног алата пре него што извршите било каква подешавања, промените додатну опрему или складиштите електрични алат.
• Употреба и одржавање акумулаторског алата: Пуните само пуњачем који је навео произвођач. Користите електричне алате само са посебно намењеним батеријама.

3. Производ је готовview и компоненте

The Fein 18V AS 4-Speed Cordless Drill/Driver Set is designed for versatile drilling and driving tasks. It features a brushless PowerDrive motor, a 4-speed gearbox, and the QuickIN system for rapid accessory changes.

Укључене компоненте:

• 1 ASCM 18-4 QMP AS Cordless Drill/Driver (incl. auxiliary handle, belt clip, magnetic bit holder)
• 1 CORE 18 V 4.0 Ah AS Battery Pack
• 1 GAL 1880 CV AS Rapid Charger
• 1 QuickIN Accessory Set, 8 pieces
• 1 L-BOXX 136 Tool Case
• 1 i-BOXX 72
• 1 i-BOXX Rack

4. Подешавање

4.1. Пуњење батерије

Before first use, fully charge the battery pack. Insert the battery pack into the GAL 1880 CV AS Rapid Charger. The charger's indicator light will show the charging status. Ensure the battery is securely seated.

4.2. Attaching QuickIN Accessories

The QuickIN system allows for tool-free accessory changes. To attach an accessory:

1. Уверите се да је бушилица искључена и да је батерија извађена из безбедносних разлога.
2. Align the QuickIN accessory with the drill's spindle.
3. Push the accessory firmly onto the spindle until it clicks into place.
4. To remove, pull back the QuickIN collar and detach the accessory.

4.3. Причвршћивање помоћне ручке

For enhanced control and safety, especially during high-torque applications or when using the hammer function, attach the auxiliary handle. Screw the handle into the designated threaded opening on the drill body and tighten securely.

5. Упутство за употребу

5.1. Укључивање/искључивање

To power on the drill, press the trigger switch. The tool will start. To power off, release the trigger switch.

5.2. Подешавања брзине

The drill features a 4-speed gearbox for optimal performance across different materials and applications. Use the speed selector switch located on top of the drill to choose the desired speed range:

• Брзина 1: Lowest speed, highest torque for heavy-duty drilling and driving large fasteners.
• Брзина 2: Medium-low speed for general drilling and driving.
• Брзина 3: Medium-high speed for faster drilling in softer materials.
• Брзина 4: Highest speed for small diameter drilling and light applications.

5.3. Torque Settings

The electronic torque setting offers 15+1 positions, allowing precise control over fastening applications to prevent overtightening or stripping screws. Rotate the torque collar to select the desired setting. The 'drill' symbol engages full torque for drilling operations.

5.4. Hammer Function

Engage the hammer function for drilling into masonry and concrete. This function provides an impact action in addition to rotation. Select the hammer drill mode on the collar for appropriate applications.

5.5. Kickback Monitoring

The integrated kickback monitoring system enhances user safety by detecting sudden tool rotation and automatically shutting down the motor to prevent injury. Maintain a firm grip on the tool and auxiliary handle during operation.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your Fein drill/driver.

• Чишћење: Отворе за вентилацију одржавајте чистим и без прашине. Користите меку,amp cloth to clean the tool housing. Do not use harsh chemicals or abrasive cleaners.
• Одржавање батерије: Store batteries in a cool, dry place away from direct sunlight. Do not expose batteries to extreme temperatures.
• Инспекција додатне опреме: Regularly inspect QuickIN accessories for wear or damage. Replace worn accessories to maintain performance and safety.
• Складиштење: Store the tool and accessories in the provided L-BOXX case in a secure, dry location, out of reach of children.

КСНУМКС. Решавање проблема

If you encounter issues with your Fein drill/driver, refer to the following common problems and solutions:

8. Спецификације

9. Гаранција и подршка

For warranty information, please refer to the warranty card included with your product or visit the official Fein website. For technical support, spare parts, or service, please contact Fein customer service directly. Keep your purchase receipt as proof of purchase.

Fein Customer Service: Молимо посетите www.fein.com/en_us/service/ за контакт податке и додатну помоћ.