HUIYEETEX AC123-06 6-Channel Blind Emitter User Manual

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your HUIYEETEX AC123-06 6-Channel Blind Emitter. This device is designed to control motorized roller shades and blinds, offering convenient remote operation. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. Производ је готовview

2.1 Кључне карактеристике

• Једноканална контрола: Manage up to six individual or groups of motorized blinds.
• Широка компатибилност: Designed to be compatible with various motorized blind shades.
• Једноставна инсталација: Includes a snap-on wall mount base for convenient placement.
• Проширени опсег контроле: Operates effectively up to 115 feet (35 meters), minimizing signal interference from obstacles.
• Интерфејс прилагођен кориснику: Simple button layout for effortless operation.

2.2 Садржај пакета

• 1x HUIYEETEX AC123-06 Six Channel Controller
• 1x Wall Mounted Base
• 1x Instructions for Guiding to Use (this manual)
• 1x Lithium Metal battery (pre-installed or included separately)

Image: Contents of the HUIYEETEX AC123-06 package, including the remote, wall mount, and screws.

3. Подешавање

3.1 Инсталација батерије

The AC123-06 controller uses one Lithium Metal battery (CR2032), which is typically included. To install or replace the battery:

1. Carefully remove the back cover of the remote control.
2. Уметните батерију CR2032 са позитивном (+) страном окренутом нагоре.
3. Вратите задњу маску безбедно.

Слика: Позади view of the remote control, illustrating the battery compartment for CR2032 battery.

3.2 Инсталација зидног носача

The included snap-on wall mount allows for convenient storage and access to your remote. To install:

1. Choose a suitable location on your wall.
2. Use the provided screws or adhesive to secure the wall mount base to the desired surface.
3. Snap the AC123-06 controller into the mounted base.

Image: The AC123-06 remote control securely placed in its wall-mounted holder.

3.3 Pairing with Motorized Blinds

To control your motorized blinds, the AC123-06 emitter must be paired with the blind motor. The exact pairing procedure may vary slightly depending on your specific blind motor model. Refer to your blind motor's manual for precise instructions. A common pairing method is demonstrated in the video below:

Typically, pairing involves activating a program mode on the motor (often by pressing a button on the motor itself) and then sending a pairing signal from the remote (e.g., pressing a specific button twice). The motor will usually provide an audible or visual confirmation once paired.

4. Упутство за употребу

The AC123-06 controller features a simple button layout for intuitive control of your motorized blinds.

Слика: Фронт view of the AC123-06 remote control, showing the channel selection and control buttons.

4.1 Функције дугмета

• Channel Buttons (1-6): Select the desired channel to control a specific blind or group of blinds. The active channel is usually indicated on the remote's display.
• Дугме НАГОРЕ (▲): Raises the selected blind(s).
• Дугме СТОП (■): Stops the blind(s) at their current position.
• Дугме НАДОЛЕ (▼): Lowers the selected blind(s).
• Channel Selector Buttons (◀ ▶): Used to cycle through the available channels (1-6) or to adjust limits during programming.

4.2 Одабир канала

Press the corresponding channel button (1-6) to select the blind or group of blinds you wish to control. The remote's display will show the active channel number.

4.3 Controlling Blinds

Once a channel is selected, use the UP, STOP, and DOWN buttons to operate your blinds. A single press will initiate the action, and another press of the STOP button will halt movement.

5. Одржавање

• Чишћење: Обришите даљински управљач меком, сувом крпом. Не користите абразивна средства за чишћење или раствараче.
• Замена батерије: Replace the CR2032 battery when the remote's performance diminishes or the display becomes dim. Follow the instructions in Section 3.1.
• Складиштење: Store the remote in its wall mount or a safe place to prevent damage.

КСНУМКС. Решавање проблема

6.1 Даљински управљач не реагује

• Проверите батерију: Ensure the battery is correctly installed and has sufficient power. Replace if necessary.
• Опсег: Verify that the remote is within the effective control range (up to 115 feet/35 meters) of the blind motor.
• Препреке: Ensure there are no significant physical obstructions blocking the signal path between the remote and the motor.

6.2 Blinds Not Moving

• Power to Motor: Confirm that the motorized blinds are receiving power.
• Упаривање: Re-verify that the remote is correctly paired with the blind motor. If unsure, repeat the pairing process (refer to Section 3.3 and your motor's manual).
• Избор канала: Ensure the correct channel is selected on the remote for the desired blind.

6.3 Incorrect Blind Movement

• Смер мотора: If the UP button lowers the blind and the DOWN button raises it, the motor direction may need to be reversed. Consult your blind motor's manual for instructions on reversing motor direction.
• Limit Settings: If the blinds are not stopping at the desired upper or lower positions, the limit settings may need adjustment. Refer to your blind motor's manual for programming limit positions.

7. Спецификације

8. Гаранција и подршка

For warranty information and customer support, please refer to the documentation provided with your purchase or contact HUIYEETEX customer service directly. Keep your purchase receipt as proof of purchase.