WORKPROX 7.2V Упутство за употребу расипача ђубрива и семена са батеријским напајањем

1. Увод

Thank you for choosing the WORKPROX 7.2V Battery Powered Fertilizer & Seed Spreader. This versatile tool is designed for efficient and precise application of various granular materials, including fertilizers, grass seeds, salt, de-icer, and earth food. With its adjustable settings and powerful motor, it simplifies lawn care and material spreading tasks. Please read this manual thoroughly before operation to ensure safe and effective use of your spreader.

Figure 1: The WORKPROX 7.2V Battery Powered Fertilizer & Seed Spreader in operation, demonstrating its compact design and material dispersion.

2. Важна безбедносна упутства

Увек се придржавајте следећих мера предострожности како бисте смањили ризик од повреда или оштећења:

• Прочитајте упутство: Familiarize yourself with all instructions and warnings before operating the spreader.
• Лична заштитна опрема (ЛЗО): Always wear appropriate safety glasses, gloves, and a dust mask when handling granular materials and operating the spreader.
• Одржавајте простор чистим: Ensure children, pets, and bystanders are kept at a safe distance from the operating area.
• Није водоотпоран: Овај уређај је НИЈЕ ВОДООТПОРНА. Do not expose the spreader to rain, moisture, or immerse it in water. Water contact with the battery and motor can cause damage or electric shock.
• Правилно складиштење: Store the spreader in a cool, dry, and well-ventilated place, away from moisture and direct sunlight.
• Одржавање батерије: Charge the battery periodically (every 3-6 months) to prevent damage and extend its lifespan, even when not in use.
• Компатибилност материјала: Use only dry, granular materials. Do not use liquids or sticky substances.
• Избегавајте препреке: Be aware of potential obstructions that could cause clogging or damage to the dispersion wheel.
• Искључивање: Always turn off the power before cleaning, adjusting, or performing any maintenance.

3. Компоненте производа

Familiarize yourself with the different parts of your WORKPROX spreader:

Figure 2: Labeled diagram of the WORKPROX spreader components.

• ручка: Ergonomic grip for comfortable carrying and operation.
• Окидач: Activates the motor and dispersion wheel.
• Material Flowrate Adjustment Knob: Controls the rate at which material flows from the hopper (8 levels).
• ЛЕД индикатор пуњача: Приказује статус пуњења.
• Socket for Charge Plug: USB Type-C port for charging the internal battery.
• Хоппер: Large capacity container for holding granular materials.
• Dispersion Wheel: Rotates to spread materials evenly.
• Дугме за подешавање брзине: Controls the rotation speed of the dispersion wheel (6 speeds).
• УСБ тип-Ц кабл: Included for charging the device.
• Throw Width Adjustment Lever: Adjusts the angle and width of material dispersion (6 angles, max 127°).

4. Подешавање и пуњење

4.1 Почетно подешавање

Upon unboxing, inspect the spreader for any signs of damage. Ensure all components listed in Section 3 are present.

4.2 Пуњење батерије

The spreader is powered by a built-in 7.2V DC, 2.0Ah Lithium-ion battery. For optimal performance and battery longevity, fully charge the spreader before its first use.

1. Locate the USB Type-C charging port (Socket for Charge Plug) on the spreader.
2. Connect the provided USB Type-C cable to the spreader's charging port.
3. Connect the other end of the USB cable to a USB power adapter (a 30W or higher adapter is recommended, not included).
4. The Charger LED Indicator will illuminate to show charging status.
5. A full charge typically takes 2-4 hours, depending on the power supply output current. The LED indicator will change or turn off when charging is complete.

Напомена: To extend battery life, recharge the device at least once every 3-6 months, even if not in regular use.

Figure 3: Illustration of the high-capacity battery and charging recommendation.

5. Операција

5.1 Пуњење бункера

Ensure the spreader is turned off before filling. The hopper has a 2.5L capacity.

1. Hold the spreader upright and steady.
2. Carefully pour your desired granular material (fertilizer, seeds, salt, etc.) into the hopper. Do not overfill.
3. Ensure the material is dry and free of clumps to prevent clogging.

Figure 4: Filling the 2.5L large capacity hopper.

5.2 Adjusting Material Flowrate (8-Level Settings)

The Material Flowrate Adjustment Knob allows you to control the amount of material dispensed. There are 8 settings:

• Нивои 1-3: Ideal for fine grass seeds and very light applications.
• Нивои 4-6: Suitable for moderate fertilizers and general spreading.
• Нивои 7-8: Best for heavy rock salts, de-icers, or coarse materials.

Rotate the knob to select the desired level based on the material type and desired coverage.

Figure 5: The 8-level material flowrate adjustment settings.

5.3 Adjusting Seeding Angle (Throw Width)

The Throw Width Adjustment Lever allows you to modify the spread pattern and distance. There are 6 seeding angles, with a maximum adjustable angle of 127°.

• Move the lever to adjust the angle. A wider angle will cover a larger area.
• Experiment with different settings to achieve the desired coverage for your specific application.

Figure 6: Adjusting the 6-level seeding angle for precise spreading.

5.4 Adjusting Motor Speed (6 Speeds)

The Speed Adjustment Knob controls the rotation speed of the dispersion wheel, ranging from 900 to 2200 rpm/min. Higher speeds generally result in a wider and more forceful spread.

• Rotate the knob to select one of the 6 available speeds.
• Use lower speeds for more controlled, localized spreading and higher speeds for broader coverage.

Figure 7: Powerful motor with adjustable speed settings.

5.5 Spreading Operation

1. Once the hopper is filled and settings are adjusted, hold the spreader firmly by the handle.
2. Position yourself over the area you wish to spread.
3. Press and hold the Trigger to activate the dispersion wheel.
4. Walk at a steady pace, moving the spreader evenly over the area to ensure consistent coverage.
5. Release the Trigger to stop the dispersion.

The spreader can cover up to 3,767.36 sq. ft. for fertilizers and 6,458.34 sq. ft. for grass seed on a single fill, depending on material and settings.

6. Одржавање и складиштење

6.1 Чишћење

Regular cleaning ensures optimal performance and extends the life of your spreader.

• After each use, turn off the power.
• Испразните преостали материјал из бункера.
• Use a dry cloth or a soft brush to remove any residue from the hopper, dispersion wheel, and exterior.
• ВАЖНО: Do not use water or cleaning solutions directly on the spreader, especially near the battery and motor compartments, as the device is not waterproof.

6.2 Складиштење

When not in use, store the spreader in a cool, dry, and well-ventilated place, away from direct sunlight and moisture. Consider using a dust cover to protect the device.

Remember to charge the battery periodically (every 3-6 months) even during storage to maintain its health.

КСНУМКС. Решавање проблема

Ево решења за уобичајене проблеме на које можете наићи:

8. Спецификације

Technical specifications for the WORKPROX 7.2V Battery Powered Fertilizer & Seed Spreader:

Слика 8: Детаљне спецификације производа.

9. Гаранција и корисничка подршка

WORKPRO is committed to providing high-quality products and excellent customer service. For any questions, concerns, or technical assistance regarding your WORKPROX Battery Powered Fertilizer & Seed Spreader, please contact our customer support team.

We offer 24-hour customer support service to assist you. Please refer to your product packaging or the WORKPRO official webсајт за најновије контакт информације.