VTSYIQI Multi-Mode Ultrasonic Thickness Gauge MT180 User Manual

1. Увод

The VTSYIQI Multi-Mode Ultrasonic Thickness Gauge MT180 is an advanced instrument designed for precise thickness measurement of various materials. Operating on principles similar to SONAR, it offers high accuracy for a wide range of applications.

This gauge features two primary measurement modes: Pulse-Echo (P-E) mode for general thickness measurement and flaw detection, and Echo-Echo (E-E) mode, which allows for accurate measurements by eliminating the thickness of paint or other coatings.

It is suitable for measuring the thickness of materials such as metals (steel, aluminum, copper), plastics, ceramics, composites, epoxies, and glass, provided they are good conductors of ultrasonic waves. Specialized transducer models are available for specific applications, including coarse grain materials and high-temperature environments.

Кључне карактеристике укључују:

• Probe zero calibration and two-point calibration for automatic system error correction.
• Real-time display of remaining battery power.
• Automatic sleep, automatic shutdown, and power-saving functions.
• Compact, portable design with high reliability, suitable for harsh operating environments, offering resistance to vibration, impact, and electromagnetic interference.

Image 1.1: The VTSYIQI MT180 Ultrasonic Thickness Gauge and its protective carrying case.

2. Подешавање

Before operating the device, ensure proper setup by installing batteries and connecting the probe.

2.1. Инсталација батерије

1. Пронађите одељак за батерију на задњој страни уређаја.
2. Отворите поклопац одељка за батерије.
3. Insert two 'AA' size, 1.5 Volt alkaline batteries, ensuring correct polarity.
4. Добро затворите поклопац одељка за батерије.

Слика 2.1: Позади view of the gauge, highlighting the battery compartment.

2.2. Прикључак сонде

1. Identify the probe cable and the two BNC connectors on the top of the gauge.
2. Connect the probe's two connectors to the corresponding ports on the gauge. Ensure a firm connection.
3. The standard probe included is the P5EE, with a diameter of 10mm.

Image 2.2: The probe cable, showing the two connectors for attachment to the gauge.

Слика 2.3: Врх view of the gauge, illustrating the probe connection ports and the USB communication port.

3. Упутство за употребу

This section details the steps for operating your ultrasonic thickness gauge, including powering on, selecting modes, and performing measurements.

3.1. Укључивање/искључивање

Притисните тастер Повер button (usually marked with a circle and a vertical line) to turn the device on or off. The LCD display will illuminate upon activation.

3.2. Избор режима

The gauge supports two measurement modes: Pulse-Echo (P-E) and Echo-Echo (E-E).

• Пулс-ехо (ПЕ) режим: This is the standard mode for measuring material thickness and detecting internal flaws.
• Echo-Echo (E-E) Mode: Use this mode to measure the true material thickness underneath a coating (e.g., paint) without including the coating's thickness in the measurement.

Да бисте прелазили између режима, притисните PE-EE button. The selected mode will be indicated on the display.

3.3. Калибрација

Accurate measurements require proper calibration. The gauge offers zero calibration and two-point calibration.

• nulta kalibracija: This compensates for any delay in the probe and cable. Refer to the detailed manual for specific steps.
• Two-Point Calibration: This improves linearity over the measurement range. It typically involves measuring two known thicknesses.

Притисните тастер ЦАЛ button to access calibration functions.

3.4. Мерења

1. Ensure the probe is properly connected and the device is calibrated.
2. Apply a small amount of coupling gel to the surface of the material to be measured. This ensures good ultrasonic transmission.
3. Place the probe firmly and flat against the prepared surface.
4. Read the thickness value displayed on the LCD screen.
5. The gauge can operate in Режим једне тачке (seven readings per second) or Режим скенирања (sixteen readings per second). Use the СЦАН button to toggle scan mode.

Слика 3.1: Предња страна view of the gauge, showing the LCD display and control buttons for operation.

4. Одржавање

Proper maintenance ensures the longevity and accuracy of your VTSYIQI MT180 Ultrasonic Thickness Gauge.

• Чишћење: After each use, wipe the probe and the gauge's surface with a soft, dry cloth to remove any coupling gel residue or dirt. Avoid using abrasive cleaners or solvents.
• Складиштење: Store the device in its protective carrying case when not in use. Keep it in a dry environment, away from extreme temperatures and direct sunlight.
• Замена батерије: Replace batteries promptly when the low battery indicator appears to prevent inaccurate readings or device malfunction. If storing for extended periods, remove the batteries to prevent leakage.
• Брига о сонди: Handle the probe with care. Avoid dropping it or subjecting it to harsh impacts, as this can damage the transducer element.

КСНУМКС. Решавање проблема

This section addresses common issues you might encounter with your ultrasonic thickness gauge.

• No Reading or Unstable Readings:
  • Ensure sufficient coupling gel is applied and there are no air gaps between the probe and the material.
  • Verify the probe is firmly and flatly placed on the surface.
  • Check for proper probe connection to the gauge.
  • Recalibrate the device (zero calibration and two-point calibration).
  • Ensure the material is suitable for ultrasonic measurement and within the gauge's measuring range.
• Индикатор слабе батерије:
  • Replace the two 'AA' batteries with new ones.
• Уређај се не укључује:
  • Check if the batteries are installed correctly and have sufficient charge.
  • Уверите се да је поклопац одељка за батерије добро затворен.
• Нетачна очитавања:
  • Perform a two-point calibration using known thickness standards.
  • Verify the correct material velocity setting if applicable (refer to the full operation manual for advanced settings).
  • Ensure the correct measurement mode (P-E or E-E) is selected for the application.

6. Спецификације

7. Гаранција и подршка

For product support, please contact the seller, VETUS INDUSTRIAL CO.,LTD. The product typically includes a return policy of 30 days from the date of purchase for refunds or replacements, subject to the seller's terms and conditions.

Please refer to your purchase documentation or contact the seller directly for specific warranty details and technical assistance.