1. Увод
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector IP65. Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.
Image 1: SEBSON Outdoor Motion Detector IP65 in anthracite.
2. Безбедносна упутства
- Инсталацију мора обавити квалификовани електричар у складу са локалним прописима о ожичењу.
- Уверите се да је напајање искључено пре инсталације или одржавања.
- Do not exceed the maximum load capacity specified for the device.
- This product is designed for outdoor use with an IP65 rating, protecting against dust and low-pressure water jets.
- Avoid installing near heat sources, air conditioning units, or objects that may cause false triggers (e.g., swaying trees, reflective surfaces).
3. Карактеристике производа
- Integrated with 3 sensors for precise detection of people, large animals, and vehicles.
- IP65 protection rating for outdoor use.
- Suitable for surface mounting on walls or ceilings.
- Maximum load capacity: 2,000W for incandescent lamps, 1,000W for LED or energy-saving lamps.
- Detection area: 20 meters at 360°.
- Vertical orientation adjustable by 180°.
- Adjustable activation duration: 10 seconds to 30 minutes, or permanent ON/OFF.
- Adjustable ambient brightness sensor: 3-2,000 LUX.
Слика 2: Готовоview of key product specifications and features.
4. Подешавање и инсталација
4.1 Место монтирања
Choose a stable surface for mounting, either a wall or a ceiling. Ensure the chosen location allows for the desired detection area and is free from obstructions. The detector can be vertically oriented by 180° after installation.
Image 3: Vertical adjustment range of the motion detector.
4.2 Ожичење
Connect the motion detector to the AC power supply (230V) and the light fixture according to the wiring diagram provided by a qualified electrician. Ensure all connections are secure and insulated.
4.3 Adjusting Detection Area
The detection range is 20m at 360°. To reduce the detection range or exclude specific areas, use the provided modified cover. Cut the cover according to the desired pattern and place it over the sensor lens.
Image 4: Method for adjusting the detection area using a cover.
Image 5: Detection area diagrams for wall and ceiling mounting.
5. Упутство за употребу
5.1 Time Setting (TIME)
Use the 'TIME' knob to set the duration the light remains on after motion is detected. Settings range from 10 seconds to 30 minutes. You can also set it to permanent ON or OFF.
5.2 Light Sensitivity Setting (LUX)
Use the 'LUX' knob to adjust the ambient brightness threshold at which the motion detector activates the light. Settings range from 3 LUX (darkness) to 2,000 LUX (daylight). This allows the light to only turn on when it's dark enough.
Слика 6: Детаљно view of TIME and LUX adjustment controls.
6. Одржавање
- Regularly clean the sensor lens with a soft, dry cloth to ensure optimal detection performance.
- Do not use abrasive cleaners or solvents, as these can damage the device.
- Периодично проверавајте све електричне спојеве на чврстоћу и знаке хабања.
- No user-serviceable parts inside. For repairs, contact qualified personnel.
КСНУМКС. Решавање проблема
| Проблем | Могући узрок | Решење |
|---|---|---|
| Light does not turn on when motion is detected. | 1. Incorrect LUX setting (too high). 2. Нема напајања. 3. Неисправна сијалица. | 1. Adjust LUX setting to a lower value. 2. Check power connections. 3. Замените сијалицу. |
| Светло остаје укључено непрекидно. | 1. TIME setting too long or set to permanent ON. 2. Constant motion in detection area. 3. Sensor obstructed or dirty. | 1. Adjust TIME setting. 2. Reposition detector or adjust detection area with cover. 3. Clean sensor lens. |
| Светло се пали без видљивог покрета. | 1. Environmental factors (wind, heat, small animals). 2. Sensor too sensitive. | 1. Reposition detector or adjust detection area with cover. 2. Ensure no objects are causing false triggers. |
8. Спецификације
- Бренд: СЕБСОН
- Број модела: IR_OUT_CA
- Боја: Антрацит
- Извор напајања: АЦ (наизменична струја)
- Тежина артикла: 222 грама
- Максимални опсег детекције: 20 метара
- Угао детекције: 360°
- Тип монтаже: Surface mount (wall and ceiling)
- Опис батерије: Батерија није укључена
- Температурни опсег: 20 Degrees Celsius (Operating)
- Компатибилни уређаји: Smart Home Hub, Light
- Препоручена употреба: Residential security, commercial sector, automation, energy management
- Димензије: 85x55x170mm (approximate, refer to diagram for exact measurements)
Слика 7: Димензије производа.
9. Гаранција и подршка
SEBSON products are designed for durability and performance. For warranty information or technical support, please refer to the official SEBSON webсајт или контактирајте продавца. Сачувајте рачун као доказ о куповини.
За додатну помоћ, можете посетити SEBSON Brand Store.