GIGABYTE C500 Panoramic Stealth ATX Mid Tower PC Case

1. Увод

This manual provides detailed instructions for the installation, operation, and maintenance of your GIGABYTE C500 Panoramic Stealth ATX Mid Tower PC Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and to maximize the performance and longevity of your system.

The GIGABYTE C500 Panoramic Stealth case features panoramic tempered glass panels, optimized airflow design, and support for back-connect motherboards, including GIGABYTE Stealth Series components. It also includes RGB Fusion compatibility with an ARGB connector hub and supports vertical GPU installation.

2. Безбедносне информације

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Handle tempered glass panels with care. Although durable, they can break if subjected to sharp impacts or excessive force.
• Wear anti-static wrist straps or frequently touch a grounded metal object to discharge static electricity, which can damage sensitive electronic components.
• Држите мале делове и шрафове даље од деце.
• Ensure proper ventilation around the PC case to prevent overheating.
• Do not operate the PC case in environments with high humidity or extreme temperatures.

3. Садржај пакета

Проверите да ли се у вашем паковању налазе све ставке наведене у наставку. Ако неке ставке недостају или су оштећене, обратите се продавцу.

• GIGABYTE C500 Panoramic Stealth ATX Mid Tower PC Case
• Accessory Box (containing screws, cable ties, standoffs, etc.)
• Кориснички приручник (овај документ)

4. Подешавање и инсталација

4.1. Уклањање бочних панела

The GIGABYTE C500 features tool-less tempered glass panels. To remove a side panel, locate the release mechanism (often a latch or thumb screw) at the rear or top edge of the panel. Gently pull the panel away from the chassis once released.

Слика 4.1: Унутрашњи view of the case with panels removed, showing the spacious interior.

4.2. Инсталација матичне плоче

The case supports ATX motherboards and is compatible with back-connect motherboard designs, including GIGABYTE Stealth Series. Install the necessary standoffs for your motherboard form factor. Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.

Figure 4.2: Motherboard mounting area and internal layout.

4.3. Инсталација графичке картице

The case supports both standard horizontal and vertical GPU installations. For vertical installation, an optional riser cable (not included) is required. Remove the necessary PCIe slot covers, insert your graphics card, and secure it with screws.

Figure 4.3: Vertical GPU mounting area.

4.4. Инсталација уређаја за складиштење

The case includes internal bays for storage devices. Locate the drive trays or mounting points, secure your SSDs or HDDs, and then re-insert them into the chassis.

4.5. Инсталација напајања

The power supply mounts at the rear of the case. Slide your power supply into its designated bay and secure it with screws from the rear of the chassis.

4.6. Менаџмент каблова

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics. Connect all necessary power and data cables to your components.

4.7. RGB Fusion with ARGB Connector Hub

Connect your ARGB devices (fans, LED strips) to the integrated ARGB connector hub. This hub allows for synchronized lighting effects via GIGABYTE RGB Fusion software. Refer to your motherboard manual for specific RGB header locations and software instructions.

5. Операција

5.1. Укључивање

After all components are installed and cables connected, replace the side panels. Connect the power cable to your power supply and a wall outlet. Press the power button on the front I/O panel to start your system.

Figure 5.1: Front I/O panel.

5.2. Оптимизација протока ваздуха

The case is designed for optimized airflow. Ensure all pre-installed fans are connected and functioning. Consider adding additional fans to available mounting points for enhanced cooling, especially for high-performance systems.

5.3. РГБ контрола

Control the RGB lighting of connected devices through GIGABYTE's RGB Fusion software. This software allows customization of colors, patterns, and synchronization across compatible components.

6. Одржавање

6.1. Cleaning the Case

• Екстеријер: Користите меку, дamp крпом за брисање спољашњих површина. Избегавајте абразивна средства за чишћење.
• Панели од каљеног стакла: Clean with a glass cleaner and a microfiber cloth. Do not spray cleaner directly onto the glass; apply it to the cloth first.
• Филтери за прашину: Regularly remove and clean the dust filters (if applicable) to maintain optimal airflow and prevent dust buildup inside the case.

6.2. Одржавање вентилатора

Periodically check fans for dust accumulation. Use compressed air to gently clean fan blades and heatsinks. Ensure fans are free from obstructions for efficient cooling.

КСНУМКС. Решавање проблема

• Нема напајања: Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power connections.
• Вентилатори се не окрећу: Verify fan cables are securely connected to the motherboard or fan hub. Check BIOS settings for fan control.
• РГБ светла не раде: Confirm ARGB devices are correctly connected to the ARGB hub and the hub is powered. Ensure RGB Fusion software is installed and configured.
• прегревање: Check fan orientation for proper airflow. Clean dust filters and fan blades. Ensure CPU and GPU coolers are properly seated.

8. Спецификације

9. Гаранција и подршка

За информације о гаранцији и техничку подршку, обратите се званичном GIGABYTE-овом webсајт или контактирајте локалног продавца. Сачувајте доказ о куповини за потребе гаранције.

Званични GIGABYTE Webсајт: ввв.гигабите.цом