Аксијални AXI-1375T2

Аксијални СЦКС10 ИИИ База Цamp 4X4 Rock Crawler Brushed RTR Instruction Manual

Модел: AXI-1375T2

Важне информације о безбедности

УПОЗОРЕЊЕ: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury. This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. The product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

Производ је завршенview

The Axial SCX10 III Base Camp 4X4 Rock Crawler is a highly capable and durable remote-controlled vehicle designed for challenging off-road terrain. This Ready-to-Run (RTR) model comes factory assembled, providing an excellent balance of performance and scale realism.

Кључне карактеристике

  • Strong SCX10 III steel C-channel chassis
  • High clearance AR45 portal axles
  • Durable LCXU transmission
  • Factory assembled and ready-to-run
  • Loaded with scale accessories

Шта је у кутији

  • (1) Axial SCX10 III Base Camp 1/10 Scale 4X4 RTR
  • (1) Axial Slickrock 35T 540 Brushed Motor (AXI-1376)
  • (1) Spektrum SLT3 3-Channel SLT Radio (SPMRSLT320)
  • (1) Spektrum SR515 DSMR 5-Channel Receiver (SPMSR515)
  • (1) Spektrum S664 15kg WP Servo 25T (SPMS664)
  • (1) Spektrum 40A Waterproof Brushed ESC (SPMXSE1040)
  • (4) AA Transmitter Batteries
  • (1) Упутство за употребу

Потребно је завршити

The Axial SCX10 III Base Camp requires a suitable battery and charger, which are not included in the package. Please ensure you acquire these items before operation.

Illustration showing a battery and charger, indicating they are needed to complete the setup.

Illustration of a battery and charger, indicating these are required for operation.

Аксијални СЦКС10 ИИИ База Цamp 4X4 Rock Crawler in gray, shown from a side angle on a rocky terrain.

The Axial SCX10 III Base Camp 4X4 Rock Crawler, ready for action on rugged terrain.

Сетуп

1. Инсталација батерије

  • Ensure the vehicle and transmitter are turned OFF.
  • Locate the battery tray on the vehicle chassis.
  • Securely place your charged battery into the tray.
  • Connect the battery to the ESC (Electronic Speed Controller) using the appropriate connector.

2. Подешавање даљинског управљача

  • Install the four (4) AA batteries into the Spektrum SLT3 transmitter.
  • Turn ON the transmitter. The LED indicator should light up.
  • Turn ON the vehicle's power switch. The vehicle's receiver should automatically bind with the transmitter. If not, refer to the binding instructions in the full manual.

3. Уградња каросерије

  • Carefully align the body with the chassis.
  • Secure the body using the provided body clips or mounting system.
Сиде view of the Axial SCX10 III Base Camp 4X4 Rock Crawler on a rocky surface, showcasing its high ground clearance.

Сиде view of the Axial SCX10 III Base Camp, highlighting its robust design and high ground clearance.

Упутство за употребу

Once the battery is charged and installed, and the remote control is set up, you are ready to operate your Axial SCX10 III Base Camp.

Основне контроле

  • Управљање: Use the steering wheel on the transmitter to control the direction of the vehicle (left/right).
  • Гуша: Use the trigger on the transmitter to control forward and reverse movement. Pull the trigger for forward, push for reverse/brake.

Driving Tips for Rock Crawling

  • Start slowly and learn the vehicle's response to inputs.
  • Utilize the low-speed control for precise maneuvering over obstacles.
  • Observe the terrain and plan your lines to maximize traction and avoid rollovers.
  • The high clearance AR45 portal axles and durable LCXU transmission are designed for extreme articulation and obstacle negotiation.
Фронт view of the Axial SCX10 III Base Camp 4X4 Rock Crawler, highlighting its robust bumper and LED lights.

Фронт view of the Axial SCX10 III Base Camp, ready to tackle challenging terrain.

Производ у акцији

Кратка видео презентацијаasing the Axial SCX10 III Base Camp 4X4 Rock Crawler in action, demonstrating its capabilities.

Одржавање

Regular maintenance will ensure the longevity and optimal performance of your Axial SCX10 III Base Camp.

1. Генерално чишћење

  • After each use, especially in dirty or wet conditions, clean the vehicle thoroughly.
  • Use a soft brush or compressed air to remove dirt and debris from the chassis, suspension, and drivetrain.
  • Обришите тело огласомamp тканина.

2. Component Inspection

  • Regularly inspect all screws, nuts, and bolts for tightness. Tighten as necessary.
  • Check the suspension components (shocks, links) for any damage or excessive wear.
  • Inspect the tires for cuts or punctures and ensure they are securely mounted to the wheels.
  • Examine the drivetrain components (gears, driveshafts) for debris or signs of wear.
Доња страна view of the Axial SCX10 III Base Camp chassis, showing the motor, transmission, and suspension components.

Детаљно view of the Axial SCX10 III Base Camp chassis, revealing its robust internal components.

Решавање проблема

If you encounter issues with your Axial SCX10 III Base Camp, погледајте следеће уобичајене кораке за решавање проблема:

  • Нема напајања: Ensure the battery is fully charged and correctly connected. Check the vehicle's power switch and the transmitter's power switch.
  • Контроле које не реагују: Verify that the transmitter batteries are fresh and correctly installed. Re-bind the transmitter and receiver if necessary. Check for any loose wiring connections.
  • Лоше перформансе: Inspect the drivetrain for obstructions or damaged gears. Check the suspension for proper movement and ensure no components are binding. Ensure tires are clean and have good grip.

For more detailed troubleshooting, please consult the full instruction manual or contact customer support.

Спецификације

ФеатуреДетаљ
Димензије производа24.5 к 12.3 к 13.6 инча
Тежина артикла11.48 фунти
ASINB0DN3DDDK6
Број модела ставкеАКСИ-1375Т2
Препоручена старост произвођача14 - 16 година
ПроизвођачАксијални
Датум првог доступног14. новембар 2024

Гаранција и подршка

For warranty information, detailed support, or to purchase replacement parts, please visit the official Axial website or contact their customer service department. Ensure you have your model number (AXI-1375T2) ready for faster assistance.

You can also find additional resources and community forums for Axial products online.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.