LiberLive HKRV-WH01

LiberLive Natural Gas Tankless Water Heater (Model HKRV-WH01)

Outdoor Installation, 5.3 GPM, 130,000 BTU

1. Важне информације о безбедности

Пажљиво прочитајте сва упутства пре инсталације и рада. Непоштовање ових упутстава може довести до материјалне штете, телесних повреда или смрти. Сачувајте ово упутство за будуће потребе.

Сигурносне карактеристике

This water heater is equipped with 8 advanced safety features to ensure safe operation:

  • Flame Failure Protection: Automatically shuts off gas supply if the flame is not detected.
  • Заштита од прегревања: Prevents the unit from exceeding safe operating temperatures.
  • Заштита од сувог сагоревања: Activates if the unit operates without sufficient water flow.
  • Заштита од смрзавања: Automatically heats the system in low temperatures to prevent freezing (requires continuous power supply).
  • Заштита од истека времена: Shuts off after a set period of continuous operation.
  • Fan Failure Protection: Ensures proper ventilation and combustion by monitoring fan operation.
  • Pipe Blockage Protection: Detects and responds to blockages in the water pipes.
  • Заштита од високог притиска воде: Safeguards the system against excessive water pressure.
Diagram illustrating 8 types of safety protection features for the LiberLive tankless water heater.

Слика: Прекоview of the 8 safety protection features, including flame failure, overheating, and anti-freeze protection.

2. Производ је готовview

The LiberLive Natural Gas Tankless Water Heater is designed for outdoor installation, providing on-demand hot water for residential use. It offers a flow rate of up to 5.3 Gallons Per Minute (GPM) and a heat output of 130,000 BTU, suitable for supplying 3-4 outlets simultaneously.

Кључне карактеристике:

  • Outdoor Design: Thickened, corrosion-resistant body materials, stainless steel vents, and a powerful DC fan provide wind protection (up to force 8), freeze protection, sun protection, and IPX4 waterproofing.
  • Континуирана топла вода: Delivers hot water instantly without preheating delays.
  • Прецизна контрола температуре: Built-in high-tech chip and staged combustion technology maintain water temperature within 1°F of the set point.
  • даљински управљач: Includes a wired remote controller with a reach of up to 49.2 feet for convenient indoor temperature adjustments.
LiberLive tankless water heater mounted on an exterior brick wall, illustrating outdoor installation.

Image: The LiberLive tankless water heater installed on an outdoor wall, emphasizing its outdoor design.

Internal components of the LiberLive tankless water heater, including the high-speed DC fan, oxygen-free copper heat exchanger, T-304 stainless steel burner, and water regulating valve.

Слика: Детаљна view of the water heater's internal components, highlighting the high-quality burner, heat exchanger, and fan.

3. Подешавање и инсталација

This water heater is designed for outdoor installation only. Ensure the installation location provides adequate clearance and protection as specified in local codes and this manual.

Захтеви за инсталацију:

  • Локација: Must be installed outdoors. Choose a location that is easily accessible for maintenance and protected from direct impact.
  • Gas Source: Natural Gas. Ensure proper gas line connection by a qualified professional.
  • Електрични прикључак: Requires a 110V/50Hz power supply.
  • Прикључци за воду: Standard 3/4" NPT fittings for water inlet and outlet.
  • Монтажа: Wall-mounted installation. Ensure the mounting surface is sturdy enough to support the unit's weight.

Кораци инсталације (резиме):

  1. Mount the unit securely to an exterior wall using appropriate hardware.
  2. Спојите доводну цев природног гаса на улаз за гас од 3/4" NPT.
  3. Connect the cold water inlet to the 3/4" NPT water inlet.
  4. Connect the hot water outlet to the 3/4" NPT water outlet.
  5. Connect the wired remote controller cable.
  6. Plug the unit into a 110V power outlet.
  7. Verify all connections for leaks and proper sealing.
Diagram showing the dimensions and connection points of the LiberLive tankless water heater, including water inlet, water outlet, and gas inlet.

Image: Product dimensions and connection points for water and gas lines.

Illustration of the LiberLive tankless water heater with included accessories for installation, such as mounting screws and a manual.

Image: The water heater unit alongside included installation accessories and a table of key specifications.

4. Упутство за употребу

The LiberLive tankless water heater is designed for user-friendly operation, primarily controlled via the remote unit.

Прво покретање:

  1. Ensure the unit is properly installed and connected to gas, water, and power.
  2. Отворите вентил за довод гаса.
  3. Open a hot water faucet in your home. The unit will detect water flow and initiate heating.
  4. Press the power button on the remote controller to turn the unit on.

Коришћење даљинског управљача:

The wired remote controller allows for precise temperature adjustment from indoors.

  • Дугме за напајање: Укључује/искључује јединицу.
  • Подешавање температуре: Use the UP/DOWN arrows to set the desired water temperature. The display shows the current set temperature.
  • Пребацивање јединица температуре: Притисните дугме Ц/Ф да бисте се пребацивали између Целзијуса и Фаренхајта.
  • Приказ индикатора: The remote displays water temperature, fan signal, and flame signal.
A hand operating the remote controller for the LiberLive tankless water heater, with various rooms in the background indicating indoor control.

Image: Remote controller in use, demonstrating indoor temperature adjustment.

Split image showing the outdoor water heater on a patio and the remote controller in a bathroom, highlighting convenient remote control.

Image: Outdoor unit and indoor remote control, illustrating the convenience of remote operation.

Температурна стабилност:

The intelligent chip and staged combustion technology ensure consistent water temperatures, adapting to seasonal changes and maintaining the set temperature with minimal fluctuation.

Diagram illustrating the intelligent chip and water flow sensor working together to maintain stable water temperature.

Image: Intelligent chip and water flow sensor for precise temperature control.

5. Одржавање

Редовно одржавање обезбеђује оптималне перформансе и дуготрајност вашег проточног бојлера. Увек искључите струју и довод гаса пре него што извршите било какво одржавање.

Годишње одржавање:

  • Inspect and Clean Burner: Check for any debris or blockages in the burner assembly. Clean as necessary.
  • Flush Heat Exchanger: Periodically flush the heat exchanger to remove mineral buildup, especially in areas with hard water. Consult a qualified technician for this procedure.
  • Check Gas and Water Connections: Inspect all connections for leaks or corrosion.
  • Examine Venting: Ensure the stainless steel vents are clear of obstructions.
  • Test Anti-Freeze Function: In cold climates, ensure the anti-freeze system is functioning correctly by keeping the unit plugged in during freezing temperatures.

Winterization (if unit is to be shut down):

If the unit will be inactive during freezing temperatures and not continuously powered for anti-freeze protection, it must be properly drained to prevent damage.

  • Искључите довод гаса у јединицу.
  • Искључите довод воде у јединицу.
  • Open a hot water faucet in the house to relieve pressure.
  • Drain all water from the unit and associated piping.

КСНУМКС. Решавање проблема

Овај одељак пружа решења за уобичајене проблеме. За проблеме који нису овде наведени, контактирајте корисничку подршку.

ПроблемМогући узрокРешење
Нема топле воде / Уређај се не укључујеNo power, gas supply off, insufficient water flow, remote off.Check power connection, ensure gas valve is open, verify water pressure/flow, turn on remote.
Вода није довољно топлаTemperature set too low, high incoming water temperature, multiple fixtures running.Increase set temperature, reduce hot water demand, check for mineral buildup.
Error code on remoteIndicates a specific system fault (e.g., flame failure, overheating).Refer to the detailed error code list in the full manual. Often requires power cycling the unit or professional service.
Температура воде варираInconsistent water flow, mineral buildup, external factors (e.g., cold weather).Ensure stable water pressure, consider flushing the unit, verify anti-freeze protection is active in cold weather.
Јединица пропушта водуLoose connections, damaged components, freezing damage.Tighten connections, inspect for visible damage. If freezing is suspected, contact a professional.

7. Спецификације

Detailed technical specifications for the LiberLive Natural Gas Tankless Water Heater (Model HKRV-WH01).

СпецификацијаВалуе
БрандLiberLive
Број моделаHKRV-WH01
Извор напајањаПриродни гас
Позиција инсталацијеOutdoor Installation Only
Називни проток5.3 галона у минути (GPM)
Излаз топлоте130,000 британских термалних јединица (BTU)
Називни притисак гаса2800Па / 2000Па
Опсег притиска воде0.025 ~ 0.8 MPa (3.6 - 116 PSI)
Ратед Волtage110В / 50Хз
Ватtage35 вати
Опсег пораста температуре35°C - 65°C
Димензије производа (Ш к Д к В)14.2 cm x 7.1 cm x 21.7 cm
Water Outlet/Inlet Fittings3/4" NPT
Фитинг за довод гаса3/4" NPT
Врста материјалаМесинг, метал
ЦертификатиCSA Certificated

8. Гаранција и подршка

LiberLive is committed to providing reliable products and excellent customer service.

Информације о гаранцији:

The LiberLive water heater comes with a comprehensive 2 година гаранције that covers the entire unit from the date of purchase. This warranty covers defects in materials and workmanship under normal use and service.

Корисничка подршка:

For any questions, concerns, or technical assistance, please contact our dedicated customer support team. Have your model number (HKRV-WH01) and purchase date ready when contacting support.

Contact information can typically be found on the LiberLive official webсајт или вашу документацију о куповини.

© 2026 LiberLive. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.