1. Увод
Thank you for choosing the Walfront 4.3 Inch 1080P HD Industrial Endoscope Camera. This device is designed for visual inspection in hard-to-reach areas, offering a clear view with its high-definition display and durable construction. This manual provides essential information for the proper setup, operation, and maintenance of your endoscope camera.
2. Производ је готовview
The Walfront Industrial Endoscope Camera features a compact design with an integrated display and intuitive controls. Familiarize yourself with the components before operation.

Слика 2.1: Фронт view of the endoscope camera, displaying the 4.3-inch screen and control panel. The screen shows 'No Signal', indicating the probe is not yet connected or active.

Слика 2.2: Детаљно view of the control buttons, including Power, OK, navigation arrows, and a 180-degree rotation button.
Садржај пакета:
- Endoscope Camera Unit
- Lens Probe (1m length)
- УСБ кабл (тип Ц)
- Упутство за употребу
3. Спецификације
| Дисплаи | 4.3-инчни дисплеј у боји |
| Резолуција | 1920 к 1080п |
| Ленс Англе | 70° |
| Воркинг Волtage | 5V |
| Водоотпорна оцена | IP67 (Lens Only) |
| Пречник сочива | 8мм |
| Конектор за напајање | Тип Ц |
| Капацитет батерије | 2600mAh Lithium Ion Battery (Built-in) |
| Материјал | АБС |
| Назив модела | WALFRONThc19y5wg7i-11 |
4. Подешавање
Follow these steps to prepare your endoscope camera for use:
- Напуните уређај: Before first use, ensure the endoscope camera is fully charged. Connect the provided USB Type-C cable to the device's charging port and a suitable 5V USB power adapter (not included). The charging indicator will show the charging status.
- Attach the Lens Probe: Carefully connect the lens probe to the designated port on the main unit. Ensure it is securely fastened to prevent signal loss.
- Укључено: Press and hold the Power button (refer to Figure 2.2) for a few seconds until the display screen illuminates.
5. Упутство за употребу
Once the device is powered on, you can begin your inspection.
5.1 Основни рад
- Укључивање/искључивање: Press and hold the Power button to turn the device on or off.
- Навигација: Use the up/down arrow buttons to navigate through menu options (if applicable).
- Потврдите избор: Press the 'OK' button to confirm a selection or take a photo/record video (depending on the mode).
- Ротација слике: Press the 180-degree rotation button to flip the image on the screen, which is useful when the probe is in an inverted position.
5.2 Using the Lens Probe
Gently insert the 8mm diameter lens probe into the area you wish to inspect. The IP67 rating ensures the lens is waterproof, allowing for inspection in wet environments or underwater. The integrated assist light provides illumination in dark spaces.

Слика 5.1: The endoscope camera being used for plumbing inspection, demonstrating its utility in confined spaces.

Слика 5.2: Examples of common applications for the endoscope camera, such as inspecting automotive engines, household appliances, and plumbing.
6. Одржавање
Правилно одржавање осигурава дуготрајност и оптималне перформансе ваше ендоскопске камере.
- Чишћење: After each use, especially in dirty or wet environments, gently wipe the lens probe with a soft, damp cloth. For the main unit, use a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Складиштење: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lens probe is coiled loosely and not sharply bent.
- Одржавање батерије: To maintain battery health, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% every few months.
КСНУМКС. Решавање проблема
If you encounter issues with your endoscope camera, refer to the following common problems and solutions:
| Проблем | Решење |
| "No Signal" on screen | Ensure the lens probe is securely connected to the main unit. Power off and restart the device. |
| Уређај се не укључује | Check battery level. Connect the device to a charger using the USB Type-C cable. If the issue persists, the battery may be fully depleted or faulty. |
| Image is blurry or dark | Clean the lens tip. Ensure the assist light is on if operating in a dark environment. Adjust the distance between the lens and the object. |
| Дугмад не реагују | Try restarting the device. If unresponsive, allow the battery to fully discharge and then recharge before attempting to power on again. |
8. Гаранција и подршка
За информације о гаранцији и техничку подршку, погледајте документацију коју сте добили приликом куповине или контактирајте продавца. Сачувајте рачун као доказ о куповини за евентуалне рекламације у вези са гаранцијом.
За додатну помоћ, можете посетити продавницу Walfront на Амазону: Продавница у Волфронту