1. Увод
Thank you for choosing the ONIDEK Floor Lamp with Fan. This product combines a versatile LED floor lamp with an integrated fan, offering adjustable lighting, color temperature, RGB options, and fan speeds. It can be controlled via a remote or the integrated buttons on the lamp pole. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Важна безбедносна упутства
Please read all safety instructions carefully before use and retain this manual for future reference.
- Увек искључите лamp from the power outlet before cleaning, performing maintenance, or moving it.
- Ne koristite lamp with a damaged cord or plug. If the cord or plug is damaged, contact customer support for assistance.
- Не излажите лamp to water or moisture. Use only in dry indoor environments.
- Keep the fan blades clear of obstructions. Do not insert fingers or other objects into the fan grille.
- Уверите се да је лamp поставља се на стабилну, равну површину како би се спречило превртање.
- Не покушавајте да раставите или поправите лamp себе. Све сервисирање препустите квалификованом особљу.
- Чувати ван домашаја деце и кућних љубимаца.
3. Садржај пакета
Проверите да ли су све компоненте присутне и у добром стању:
- спрат Лamp Assembly (Base, Pole Sections, Lamp Heads with Fans)
- Ремоте Цонтрол
- Повер Адаптер
- Упутство за употребу (овај документ)
4. Упутство за монтажу
Follow these steps to assemble your ONIDEK Floor Lamp with Fan:
- Повежите цеви: Carefully connect the threaded pole sections (tubes) together by twisting them clockwise until secure. Ensure the internal wiring passes freely through the connections.
- Pull Out Extra Wires: Gently pull any excess internal wiring from the bottom of the lowest pole section to ensure it does not get pinched during base attachment.
- Screw the Tube into the Base: Align the bottom pole section with the lamp base and screw it clockwise until it is firmly attached. Ensure the base is stable.
- Повежите кабл за напајање: Insert the power adapter into the designated port on the lamp pole, then plug the adapter into a standard wall outlet.
Once assembled, ensure all connections are secure and the lamp is stable before operation.
5. Упутство за употребу
Your ONIDEK Floor Lamp with Fan can be controlled using the included remote control or the buttons located on the lamp поле.
5.1. Функције даљинског управљача
- Укључивање/искључивање: Притисните тастер ОН/ОФФ дугме за окретање лamp and fan on or off.
- Подешавање светла:
- Осветљеност: Користите + и - buttons to adjust brightness from 10% to 100%.
- Температура боје: Користите 3000К-6000К buttons to cycle through warm white (3000K), neutral white (4500K), and cool white (6000K) settings.
- РГБ режим: Притисните тастер РГБ button to activate color-changing modes.
- ноћно светло: Притисните тастер Ноћно светло button for a soft, low-intensity light.
- Подешавање вентилатора: Користите Fan Gear Setting buttons to select desired fan speed.
5.2. Button Control on Lamp Поле
Тхе лamp pole features integrated buttons for basic control:
- Подешавање вентилатора: Buttons to increase or decrease fan speed.
- Подешавање светла: Buttons to adjust light brightness or cycle through color temperatures.
- РГБ подешавање светла: Button to control RGB lighting modes.
5.3. Gooseneck Adjustment
Тхе лamp heads are equipped with flexible goosenecks, allowing for 360° rotation and 180° vertical adjustment. This enables you to direct both the light and fan airflow precisely where needed.
Some models may also feature a touch control area on the lamp head for quick adjustments.
6. Одржавање
To keep your ONIDEK Floor Lamp with Fan in optimal condition:
- Чишћење: Увек искључите лamp пре чишћења. Користите меку, суву крпу да обришете лamp pole, base, and lamp heads. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the finish or electrical components.
- Лопатице вентилатора: Periodically check the fan grilles for dust accumulation. Use a soft brush or compressed air to gently remove dust from the fan blades.
- Складиштење: Ако чувате лamp for an extended period, unplug it and store it in a dry, cool place, protected from dust and moisture.
КСНУМКС. Решавање проблема
Ако наиђете на проблеме са вашим лamp, погледајте следеће уобичајене проблеме и решења:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Lamp се не укључује. | Нема струје, лабава веза, празна батерија даљинског управљача. | Проверите да ли је адаптер за напајање безбедно прикључен у обаamp and the wall outlet. Ensure the wall outlet is functional. Replace remote control batteries. |
| Вентилатор не ради. | No power, fan speed set to off, obstruction. | Verify power connection. Increase fan speed using remote or pole buttons. Check for any obstructions around the fan blades. |
| Даљински управљач не реагује. | Dead batteries, out of range, signal obstruction. | Replace remote control batteries. Ensure you are within range and there are no objects blocking the signal path to the lamp. |
| Светло неочекивано трепери или се гаси. | Нестабилно напајање, лабава веза. | Ensure the power adapter is firmly connected. Try plugging the lamp into a different wall outlet. |
8. Спецификације
| Феатуре | Детаљ |
|---|---|
| Бранд | ONIDEK |
| Број модела | LDFS |
| Димензије производа | 11"Д к 11"Ш к 72"В |
| Lamp Тип | спрат Лamp |
| Тип извора светлости | ЛЕД |
| Ватtage | 12 вати |
| Температура боје | 3000K-6000K (Stepless Adjustable) |
| Осветљеност | 10%-100% затамњивање |
| РГБ осветљење | Да |
| Контролни метод | Remote and Button Control |
| Гоосенецк Адјустмент | 360° & 180° Rotation |
| Основни материјал | легирани челик |
| Схаде Материал | легирани челик |
| Врста материјала | угљенични челик |
| Боја | Црно |
| Бежични | бр |
9. Гаранција и подршка
9.1. Гаранција произвођача
This ONIDEK Floor Lamp with Fan is covered by a two-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.
9.2. Корисничка подршка
For warranty claims, technical assistance, or any questions regarding your product, please contact the retailer where you purchased the item or the ONIDEK customer support team. Please have your purchase receipt and model number (LDFS) available when contacting support.
For the most up-to-date contact information, please refer to the product packaging or the official ONIDEK webсајту.