GOBI II Universal Condensate Pump

1. Увод

The REFCO GOBI II Universal Condensate Pump is designed for efficient and quiet removal of condensate from air conditioning, HVAC, and dehumidifier systems. Suitable for systems ranging from 6,000 BTU/h to 120,000 BTU/h, this pump features a digital water sensor, universal voltage compatibility, and individually configurable flow rates, making it a versatile solution for various applications. This manual provides essential information for safe installation, operation, maintenance, and troubleshooting of your GOBI II pump.

Слика 1.1: Склопљено view of the GOBI II Universal Condensate Pump.

2. Безбедносне информације

Пажљиво прочитајте сва безбедносна упутства пре инсталације и рада. Непоштовање ових упутстава може довести до струјног удара, пожара или озбиљних повреда.

• Увек искључите напајање клима уређаја и пумпе пре него што извршите било какву инсталацију, одржавање или решавање проблема.
• Installation must be performed by a qualified technician in accordance with all local and national electrical and plumbing codes.
• Уверите се да је пумпа инсталирана на месту где је заштићена од директног прскања воде и екстремних температура.
• Do not operate the pump with damaged cables or if it has been dropped or damaged.
• This pump is designed for condensate water only. Do not use it for other liquids.
• Држите децу и неовлашћена лица даље од места инсталације.

3. Производ је готовview

The GOBI II pump system consists of several key components designed for reliable condensate removal.

Figure 3.1: GOBI II kit components and labeled diagram.

3.1. Укључене компоненте:

• Кабл за напајање
• Кабл за аларм
• Star tube and anti-siphon device
• Вијци (за монтажу)
• Вијчани анкери
• Factory-installed alarm fuse
• Везице за каблове

3.2. Кључне карактеристике:

• Universal application for various AC systems.
• High pumping capacity: 11 GPH (gallons per hour).
• High discharge head: up to 65.6 ft.
• Extremely quiet operation: less than 19 dB noise level.
• Reliable digital water sensor, eliminating traditional float problems.
• Demand-oriented control for optimized pumping capacity.

4. Подешавање и инсталација

The GOBI II pump is designed for direct mounting under the air conditioner unit. Follow these steps for proper installation:

1. Монтажа: Secure the pump's wall back plate (component 9 in Figure 3.1) to a stable surface directly beneath the air conditioning unit using the provided screws and screw anchors. Ensure it is level.
2. Pump Body Installation: Slide the pump body (component 1 in Figure 3.1) onto the mounted back plate until it clicks securely into place.
3. Condensate Inlet Connection: Connect the condensate drain line from the air conditioning unit to the pump's inlet. Ensure a tight, leak-free connection.
4. Discharge Line Connection: Connect the 1/4" discharge tube from the pump's outlet to your desired drain point. Install the provided anti-siphon device in the discharge line to prevent backflow and ensure proper pump operation. Ensure the discharge line rises vertically for at least 6 inches before running horizontally or downwards.
5. Електрични прикључак: Connect the power cable to the pump and then to a suitable power supply (100-240 VAC, 50/60 Hz). Ensure all electrical connections are secure and comply with local electrical codes.
6. Alarm Cable Connection (Optional but Recommended): Connect the alarm cable to the pump's alarm relay terminals and integrate it with your HVAC system's alarm circuit if desired. The alarm relay is interchangeable (NO or NC) and rated for 250VAC, 6.3A or 28VDC, 6.3A.
7. тестирање: Once all connections are made, restore power to the system. Pour a small amount of water into the air conditioner's drain pan to verify the pump activates and discharges water correctly. Check for any leaks.

5. Упутство за употребу

The GOBI II condensate pump operates automatically based on the water level detected by its digital sensor. It will activate when condensate accumulates and shut off once the water is cleared.

5.1. Digital Sensor and Flow Control:

The integrated digital sensor (component 4 in Figure 3.1) precisely monitors the water level, ensuring the pump activates only when necessary. The pump's demand-oriented control adjusts the pumping capacity as needed, optimizing efficiency and minimizing noise.

5.2. Diagnostic LEDs:

The pump features a diagnostic LED (component 8 in Figure 3.1) to indicate its operational status.

Figure 5.1: Diagnostic LED indicators.

• Зелена ЛЕД: Indicates normal operation. The pump is powered and functioning correctly.
• Црвена ЛЕД: Indicates an error or alarm condition. Refer to the Troubleshooting section for possible causes.

6. Одржавање

Regular maintenance ensures the longevity and optimal performance of your GOBI II pump.

• Месечна провера: Visually inspect the pump, inlet, and discharge lines for any blockages, kinks, or leaks. Ensure the pump housing is clean.
• Годишње чишћење: Disconnect power to the pump and the AC unit. Carefully remove the pump body from the wall back plate. Clean the water tray (component 5 in Figure 3.1) and the digital sensor (component 4) to remove any sludge, mold, or debris. A soft brush and mild detergent can be used. Rinse thoroughly with clean water.
• Замена филтера: The pump includes a replaceable filter (component 3 in Figure 3.1). Check its condition during annual cleaning and replace if it appears clogged or damaged.
• Поновно састављање: After cleaning, reassemble all components, ensuring they are securely in place. Restore power and test the pump's operation.

КСНУМКС. Решавање проблема

If you encounter issues with your GOBI II pump, refer to the following table for common problems and solutions. Always disconnect power before attempting any inspection or repair.

8. Спецификације

Detailed technical specifications for the GOBI II Universal Condensate Pump.

8.1. Capacity Curve:

The following graph illustrates the pump's capacity (flow rate) versus vertical lift/head pressure.

Figure 8.1: GOBI II Capacity Curve.

9. Гаранција

The manufacturer warranty for the GOBI II Universal Condensate Pump begins with the commissioning of the unit. Please refer to the warranty documentation included with your purchase for specific terms and conditions.

10. Подршка

For technical assistance, spare parts, or further inquiries, please contact your REFCO product supplier or visit the official REFCO webсајт за контакт информације за подршку.