OWON HDS241

OWON HDS241 Single-Channel Handheld Oscilloscope Instruction Manual

Your comprehensive guide to operating the HDS241 3-in-1 device.

1. Увод

The OWON HDS241 is a versatile 3-in-1 handheld device that integrates a single-channel oscilloscope, a 24,000-count digital multimeter, and a 100KHz signal generator. Designed for portability and efficiency, it is suitable for various electrical testing and measurement applications. This manual provides detailed instructions for safe and effective use of your device.

Мере предострожности: Always observe general safety rules when operating electrical equipment. Ensure proper connections and use appropriate probes for the measurement task. Do not exceed the maximum input ratings of the device.

2. Производ је готовview

The HDS241 combines three essential functions into one compact unit:

  • Осцилоскоп: Features a 40 MHz bandwidth, 250 MSa/s real-time sampling rate, and a waveform refresh rate of up to 10,000 wfms/s. It supports auto-setup, multiple measurement functions, cursor measurement, and a slow sweep mode for long-term signal monitoring.
  • Дигитални мултиметар: A 4½-digit True RMS multimeter with 24,000 counts. It can measure AC/DC voltage, AC/DC current, resistance, diode, capacitance, and perform continuity tests. Maximum input voltage is AC 750V and DC 1000V.
  • Генератор сигнала: A single-channel generator with a frequency range of up to 100 kHz. It supports sine, square, ramp, and pulse waveform outputs with a maximum amplitude of 2.5 Vpp.

The device features a 3.5-inch high-definition color LCD screen for clear display of waveforms and measurement data. Its robust design includes a rubber coating for durability and improved grip.

OWON HDS241 handheld oscilloscope, multimeter, and signal generator with key features highlighted.

Слика 2.1: The OWON HDS241 device, showcasing its 3-in-1 functionality as an oscilloscope, multimeter, and signal generator. Key specifications for each mode are listed alongside the device.

Detailed diagram of OWON HDS241 controls and ports.

Слика 2.2: A comprehensive diagram illustrating the various buttons, ports, and display areas of the OWON HDS241, including the viewing area, multi-function keys, channel key, mode change key, system configuration, save button, power button, multimeter input port, horizontal adjustment, measurement range switch, arrow keys, auto range key, hold/run key, signal input connector, probe compensation output, and USB charge/communication interface.

3. Подешавање

3.1 Инсталација и пуњење батерије

The HDS241 is powered by a high-capacity 2000 mAh lithium battery. The device features a low-power consumption design for extended operation.

  • Пуњење: Connect the device to a power source using the standard USB Type-C port. You can use a compatible adapter or a power bank.
  • Трајање батерије: The battery provides long-lasting performance. Actual usage time may vary based on operating conditions.
OWON HDS241 battery compartment and USB Type-C charging port.

Слика 3.1: This image shows the internal battery compartment of the OWON HDS241, revealing two 18650 lithium batteries, and highlights the USB Type-C port for charging and PC connection.

3.2 Повезивање сонди

For oscilloscope measurements, connect the probe to the BNC connector. For multimeter functions, use the provided test leads with the multimeter input ports.

  • БНЦ конектор: The BNC connector features an external rubber coating to enhance safety and prevent external interference. It supports high-voltage probes for accurate and reliable signal capture.
OWON HDS241 BNC connector detail and True RMS measurement comparison.

Слика 3.2: This image highlights the BNC connector with external rubber coating for safety and interference prevention. It also illustrates the difference between conventional measurement (accurate only for sine waves) and True RMS measurement (accurately measures all current waveforms).

3.3 Укључивање/искључивање

Press and hold the power button (refer to Figure 2.2 for location) to turn the device on or off.

4. Упутство за употребу

4.1 Режим осцилоскопа

To enter Oscilloscope mode, press the 'Mode' button until the oscilloscope interface is displayed.

  • Basic Waveform Display: Connect the probe to the signal source. The waveform will be displayed on the screen.
  • Auto-Setup: Press the 'Auto' button for automatic adjustment of vertical, horizontal, and trigger settings to quickly display a stable waveform.
  • Функције мерења: The HDS241 offers various measurement capabilities:
    • Аутоматска мерења: Includes Period, Frequency, Mean, PK-PK, Max, Min, Amplitude, and RMS.
    • Мерење курсора: Користите функцију курсора за мерење запреминеtage difference (ΔV) and time difference (ΔT) between two points on the waveform.
  • Чување података: Connect the device to a computer via the USB Type-C port. The included PC software allows you to save waveform images and data for further analysis.
OWON HDS241 oscilloscope performance features including dual sampling, high refresh rate, auto-measurements, and cursor measurement.

Слика 4.1: This image details the oscilloscope's advanced features, including Dual Sampling Mode for interference detection, High Refresh Rate (10,000 wfms/s) and Deep Storage (8K record length), 8 Types of AutoMeasurements (Frequency, Period, Amplitude, Max, Min, Mean, PK-PK, RMS), and Cursor Measurement for ΔV and ΔT. It also shows the Save Function for reference waveforms.

Examples of actual waveforms measured by the OWON HDS241: Mains Waveform, TV Signal Wave, PLC Pulse Wave, Multi-Audio Frequency Response Signal.

Слика 4.2: This image displays four examples of waveforms captured by the OWON HDS241: a Mains Waveform with peak highlighted, a TV Signal Wave, a PLC Pulse Wave, and a Multi-Audio Frequency Response Signal, demonstrating its versatility in signal analysis.

OWON HDS241 connected to a laptop via USB for data analysis.

Слика 4.3: The OWON HDS241 is shown connected to a laptop via a USB cable, demonstrating its capability to save waveform images and data for further analysis on a computer.

4.2 Режим мултиметра

To enter Multimeter mode, press the 'Mode' button until the multimeter interface is displayed.

  • мерења: The multimeter supports measuring AC/DC voltage, AC/DC current, resistance, diode, capacitance, and continuity. Select the desired measurement function using the appropriate buttons.
  • Прави РМС: The HDS241 features True RMS measurement, which is essential for accurately measuring non-sinusoidal AC waveforms.
  • Аутоматски домет: The device automatically selects the appropriate measurement range for convenience.
OWON HDS241 handheld device measuring a car battery.

Слика 4.4: The OWON HDS241 is depicted in an outdoor setting, connected to a car battery with multimeter probes, illustrating its practical application for electrical measurements.

4.3 Режим генератора сигнала

To enter Signal Generator mode, press the 'Mode' button until the signal generator interface is displayed.

  • Избор таласног облика: Choose from sine, square, ramp, or pulse waveforms.
  • Фреквенција и Ampдужина: Adjust the output frequency (up to 100 kHz) and amplitude (up to 2.5 Vpp) as required for your testing needs.

5. Одржавање

  • Чишћење: Користите меку, суву крпу за чишћење уређаја. Не користите абразивна средства за чишћење или раствараче.
  • Одржавање батерије: Да бисте продужили век трајања батерије, избегавајте често потпуно пражњење батерије. Редовно пуните уређај, посебно ако ће бити складиштен дуже време.
  • Складиштење: Уређај чувајте на хладном и сувом месту, даље од директне сунчеве светлости и екстремних температура.

КСНУМКС. Решавање проблема

If you encounter issues with your OWON HDS241, consider the following basic troubleshooting steps:

  • Уређај се не укључује: Уверите се да је батерија напуњена. Повежите уређај са извором напајања помоћу USB Type-C кабла и покушајте поново.
  • Није приказан таласни облик: Check that the probe is correctly connected to both the device and the signal source. Verify the signal source is active. Try using the 'Auto' button to adjust settings.
  • Нетачна очитавања мултиметра: Ensure the test leads are properly inserted into the correct input jacks for the measurement type (e.g., voltage, current, resistance). Check the integrity of the test leads.
  • Нестабилна очитавања: Ensure connections are secure and there is no external interference.

For further assistance, please contact OWON customer support.

7. Спецификације

OWON HDS241 detailed specifications for oscilloscope, digital multimeter, and waveform generator.

Слика 7.1: This image presents a detailed table of technical specifications for the OWON HDS241, covering its oscilloscope, digital multimeter, and waveform generator functions.

7.1 Спецификације осцилоскопа

ФеатуреСпецификација
Бандвидтх40 МХз
Канал1
Sampлинг Фрекуенци250 МСа/с
Acquisition ModelSample, Peak detection
Рецорд ЛенгтхМакс. 8K
ДисплаиЛЦД од 3.5 инча
Брзина освежавања таласног облика10,000 вфмс/с
Инпут ЦоуплингDC, AC, уземљење
Инпут Импеданце1 MΩ±2%, паралелно са 16 pF±10 pF
Слабљење сонде1к, 10к, 100к, 1000к
Макс. Инпут Волtage400V (DC+AC, PK-PK)
Резолуција осетљивости10мВ/див-10В/див
Вертикална резолуција8 бит
Хоризонтал Сцале5ns/div-1000s/div, Step 1-2-5
Тип окидачаЕдге
Триггер МодеАуто, Нормал, Сингле
Аутоматско мерењеPeriod, Frequency, Mean, PK-PK, Max, Min, Amplitude, RMS
Цурсор МеасурементΔV, ΔT

7.2 Спецификације дигиталног мултиметра

ФеатуреСпецификација
Full Scale Reading4½ digits (max. 24000 counts)
Тестни режимиВолtage, current, resistance, capacitance, diode, continuity
Мак Инпут ВолtageНаизменична струја 750V, једносмерна струја 1000V
Макс. улазна струјаАЦ 10А, ДЦ 10А
Аутоматски дометДа
Труе РМСДа

7.3 Waveform Generator Specifications

Вавеформ ТипеИзлазна фреквенција
Сине10Хз-100КХз
Скуаре10Хз-100КХз
Ramp10Хз-100КХз
Пулс10Хз-10КХз
Ampлитуде2Vpp-2.5Vpp

7.4 Опште спецификације

  • Димензије: 9.6 к 3.8 к 19.8 цм
  • Тежина: 1.2 кг
  • батерија: 2000 мАх литијумска батерија
  • Интерфејс за пуњење: УСБ Типе-Ц

8. Гаранција и подршка

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact OWON customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.