URintells Cuising Espresso Machine with Grinder

1. Производ је готовview

The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, is designed to provide a complete coffee brewing experience at home. This all-in-one machine features an integrated conical burr grinder, a 58mm portafilter, and a powerful steam wand for milk frothing. Its intuitive controls and robust construction ensure consistent, high-quality espresso and milk-based beverages.

Слика 1.1: The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, showcasing its sleek stainless steel design and integrated components.

Слика 1.2: The espresso machine with its dimensions: 12.6 inches deep, 13.19 inches wide, and 16.14 inches high, illustrating its compact design for various spaces.

2. Безбедносне информације

Пажљиво прочитајте сва безбедносна упутства пре употребе уређаја. Сачувајте ово упутство за будуће потребе.

• Уверите се да је машина постављена на стабилну, равну површину, даље од извора топлоте и воде.
• Не потапајте уређај, кабл за напајање или утикач у воду или друге течности.
• Искључите машину из утичнице пре чишћења или када је не користите.
• Држите децу и кућне љубимце подаље од уређаја током рада.
• Користите само додатну опрему и додатке које препоручује произвођач.
• Не користите машину ако је кабл за напајање или утикач оштећен.
• Будите опрезни при руковању врућим површинама и паром.

3. Подешавање

3.1 Распакивање и почетно чишћење

Carefully remove all packaging materials. Inspect the machine for any damage. Before first use, it is essential to clean all removable parts that will come into contact with coffee or water.

1. Remove Yellow Cap: Locate and remove the yellow protective cap from the bottom of the water tank or pump mechanism. This cap is for shipping protection only.
2. Компоненте за прање: Wash the water tank, portafilter, filter baskets, drip tray, and bean hopper with warm, soapy water. Rinse thoroughly and dry completely.
3. Wipe Down Machine: Обришите спољашњост машине са огласомamp тканина.

Слика 3.1: Visual guide for initial setup, including removing the yellow cap, washing parts, and starting the initial program.

3.2 Прва употреба и прајмирање

After cleaning, the machine needs to be primed to ensure proper water flow.

1. Напуните резервоар за воду: Fill the water tank with fresh, cold water up to the MAX line. Ensure the tank is securely placed in the machine.
2. Укључено: Plug the machine into a grounded power outlet. Press the ОН/ОФФ button. The machine will perform an initial startup program.
3. Run Water Cycle: Place a large container under the portafilter head and steam wand. Press any brew button (e.g., Single Shot or Double Shot) to run a cycle without coffee. This flushes the system and primes the pump. Repeat this process for the steam wand by activating the steam function to release water until steam appears.

4. Упутство за употребу

4.1 Млевење зрна кафе

The integrated conical burr grinder offers 15 precise settings to achieve the ideal grind size for your espresso.

Слика 4.1: The 15-level conical burr grinder, showing settings from coarse (15) to fine (1) for optimal coffee extraction.

1. Напуните посуду за пасуљ: Add fresh, whole coffee beans to the bean hopper.
2. Изаберите величину млевења: Adjust the grind size dial. For espresso, a setting between 3 и 5 is generally recommended. Experiment to find your preferred setting.
3. Млевена кафа: Place the portafilter under the grinder outlet. Press the portafilter against the grinding button to start grinding. The machine will dispense the set amount of ground coffee.

4.2 Кување еспреса

Achieve a rich and full-bodied espresso with the 58mm extraction system and 15-bar ULKA pump.

Слика 4.2: Step-by-step guide for brewing espresso, from preheating to extraction.

1. Уметните корпу филтера: Place the appropriate filter basket (single or double shot) into the portafilter.
2. Доза и Тamp: Fill the filter basket with 14-16g of ground coffee for a single espresso or 20-22g for a double espresso. Tamp the coffee evenly and firmly using the provided tampер.
3. Причврстите портафилтер: Securely attach the portafilter to the group head by inserting it and rotating it to the right until it locks into place.
4. Куп за место: Поставите шољицу/шољице за еспресо на посуду за капање директно испод грлића портафилтера.
5. Изаберите пиво: Притисните тастер Сингле Схот or Доубле Схот button. The machine will pre-infuse the coffee before beginning extraction.
6. Stop Extraction: The machine will automatically stop the extraction based on programmed volume. You can manually stop it at any time by pressing the brew button again.

Слика 4.3: Espresso being extracted, demonstrating the 15-bar ULKA pump for optimal pressure.

Слика 4.4: Close-up of the 58mm extraction system, ensuring even saturation of coffee grounds.

4.3 Прављење пене од млека

The professional steam wand allows you to create creamy microfoam for lattes and cappuccinos.

1. Припремите млеко: Напуните бокал за пену од нерђајућег челика хладним млеком (млечним или немлечним) до испод излива.
2. Активирајте Стеам: Притисните тастер Стеам button. Wait for the steam indicator light to illuminate, indicating the machine has reached steaming temperature.
3. Штап за чишћење паре: Position the steam wand over the drip tray and briefly open the steam knob to release any condensed water. Close the knob.
4. Пенушано млеко: Immerse the tip of the steam wand just below the surface of the milk. Open the steam knob fully. Angle the pitcher to create a swirling motion. For microfoam, keep the tip near the surface to incorporate air. For hotter milk, immerse the tip deeper.
5. Престаните са кувањем на пари: Once the desired temperature and texture are achieved, close the steam knob and remove the pitcher.
6. Чиста парна цев: Одмах обришите цев за пару рекламомamp cloth to remove any milk residue. Briefly open the steam knob again to purge any milk from inside the wand.

Слика 4.5: The professional steam wand in action, creating frothed milk for various coffee beverages.

4.4 Control Panel and Settings

The machine features an intuitive LCD display and easy-to-use buttons and dial for various functions.

Слика 4.6: The LCD display and control buttons, allowing customization of grind, shot volume, and other settings.

• Дугме за укључивање/искључивање: Укључује или искључује машину.
• Дугме СТАРТ/СТОП: Initiates or stops the brewing process.
• SET Knob: Used to navigate menus and adjust settings displayed on the LCD.
• Single/Double Espresso Buttons: Initiates a single or double shot espresso brew.
• Дугме за пару: Активира функцију паре за прављење пене од млека.
• Hot Water Button: Dispenses hot water.
• DESCALE Indicator: Illuminates when descaling is required.

4.5 Adjusting Brewing Temperature and Descale Reminder

You can customize the brewing temperature and set the descaling reminder frequency.

Слика 4.7: Instructions for setting brewing temperature (Low, Medium, High) and descale reminder (500, 1000, 1500 cups).

• Brewing Temperature: With the machine off, press and hold the СТАРТ/СТОП и Сингле Цуп buttons for 2 seconds to enter temperature setting mode. Use the СЕТ knob to select Low (149°F), Medium (158°F), or High (167°F).
• Descale Reminder: With the machine off, press and hold the СТАРТ/СТОП и Доубле Цуп buttons for 2 seconds to enter descale reminder setting mode. Use the СЕТ knob to select 500, 1000, or 1500 cups.

5. Одржавање

Редовно чишћење и одржавање осигуравају оптималне перформансе и дуготрајност вашег апарата за еспресо.

5.1 Дневно чишћење

Слика 5.1: Visual guide for daily cleaning of the portafilter, drip tray, bean hopper, and steam wand tip.

• Портафилтер и филтер корпе: After each use, remove the portafilter and discard the spent coffee grounds. Rinse the portafilter and filter basket under hot water.
• Парни штапић: As described in Section 4.3, clean the steam wand immediately after frothing milk.
• Посуда за капање: Empty and clean the drip tray daily or when the 'Empty Me' indicator appears.
• Шеф групе: Користите огласamp cloth to wipe the group head screen and gasket to remove any coffee residue.

5.2 Уклањање каменца

Descaling removes mineral buildup from the machine's internal components, which is crucial for performance and taste. The machine has a descaling reminder system.

Слика 5.2: Step-by-step instructions for the descaling process, including adding descaling agent, running cycles, and refilling the water tank.

1. Припремите раствор за уклањање каменца: Mix a descaling agent with water according to the descaler manufacturer's instructions. Pour the solution into the water tank.
2. Enter Descale Mode: Када је ДЕСЦАЛЕ indicator lights up, rotate the СЕТ knob to the 'CLEAN' mode.
3. Start First Stage: Притисните тастер СТАРТ/СТОП button to begin the first descaling stage. The machine will run the solution through its system.
4. Испразните и допуните: Once the first stage is complete, discard the remaining solution from the water tank and rinse the tank thoroughly. Refill the water tank with fresh, clean water.
5. Start Second Stage: Притисните тастер СТАРТ/СТОП button again to begin the second stage, which rinses the machine with clean water.
6. Завршетак: После другог сtage, the descaling process is complete, and the machine will return to standby mode.

КСНУМКС. Решавање проблема

Овај одељак се бави уобичајеним проблемима са којима се можете сусрести са апаратом за еспресо.

If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact URintells Cuising customer support.

7. Спецификације

8. Гаранција и подршка

8.1 Гаранција на производ

Please refer to the product packaging or the official URintells Cuising webсајт за конкретне гарантне услове. Типично, производи су покривени од производних грешака током одређеног периода од датума куповине.

8.2 Проширени планови заштите

Extended protection plans may be available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind for a longer duration.

• Двогодишњи план заштите: Доступно за 48.99 долара (једнократно плаћање).
• Двогодишњи план заштите: Доступно за 63.99 долара (једнократно плаћање).
• Комплетна заштита: A monthly plan at $16.99/month, covering eligible past and future purchases.

За детаље о куповиниasing or activating these plans, please consult your retailer or the plan provider.

8.3 Корисничка подршка

For technical assistance, troubleshooting, or warranty claims, please contact URintells Cuising customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (EM7110-US) and proof of purchase readily available.