VOLT BDL-VPL-1053-4-BBZ-ZON

VOLT Stemless Directional Brass Path Light (Bronze) Instruction Manual

Model: BDL-VPL-1053-4-BBZ-ZON

1. Увод

Thank you for choosing the VOLT Stemless Directional Brass Path Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new low voltage landscape lighting fixture. This path light is designed for outdoor use, providing widespread illumination for pathways, walkways, gardens, driveways, and patios.

VOLT Stemless Directional Brass Path Light illuminating a pathway at night

Image: The VOLT Stemless Directional Brass Path Light installed along a pathway, providing warm illumination.

2. Безбедносне информације

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.

  • This product is intended for use with a 12V low voltage landscape lighting system. A low voltage transformer (not included) is required for operation.
  • Do not connect directly to 120V household current.
  • Ensure power is disconnected at the transformer before installing or servicing the fixture.
  • All electrical connections must comply with local codes and ordinances. If you are unsure about installation, consult a qualified electrician.
  • Do not operate the fixture with a damaged cord or if the lens is cracked.
  • Држите децу и кућне љубимце даље од места инсталације.
  • This fixture is designed for outdoor use and is water-resistant. However, avoid submerging the fixture in water.

3. Шта је у кутији

Пакет укључује следеће компоненте:

  • VOLT Stemless Directional Brass Path Light
  • 9-inch Ground Stake
  • Mounting Hardware (for surface mounting)

Напомена: A G4 LED bi-pin bulb and a low voltage transformer are sold separately and are required for full functionality.

4. Карактеристике

  • Лов Проfile Дизајн: Standing 1.96 inches tall with a 2.71-inch diameter, this light minimizes obstruction and risk of damage.
  • Professional Grade Construction: Made from solid cast brass with a bronze finish and a heavy frosted acrylic lens for durability.
  • Lamp спреман: Designed for use with a G4 LED bi-pin bulb (not included) rated up to 20W, providing 140 degrees of light output.
  • Свестрано монтирање: Includes a 9-inch ground stake for landscape installation and hardware for surface mounting.
  • Отпорност на корозију: Features a beryllium copper socket for enhanced corrosion resistance.
  • Moisture-Tightness: Machine-threaded body screws onto an O-ring for a secure, moisture-tight seal.
  • УЛ/цУЛ на листи: Обезбеђује усклађеност са безбедносним стандардима.

5. Спецификације

АтрибутДетаљ
БрандВОЛТ
Назив моделаVOLT Stemless Directional Brass Path Light
Број моделаBDL-VPL-1053-4-BBZ-ZON
БојаБронза
МатеријалМесинг, метал
Димензије производа2.71 cm D x 2.71 cm Š x 1.96 cm V
Форма расветног телаПут
Извор напајањаЕлектрични са каблом (ниска јачина звука)tage)
Волtage12 волти (АЦ)
Тип извора светлостиLED (G4 Bi-pin bulb, not included)
Булб БасеG4
Мак Ватtage20W (for G4 LED bi-pin bulb)
Врста инсталацијеSurface Mount, Ground Stake
Унутрашња/спољна употребаОутдоор
Ниво отпорности на водуОтпоран на воду
ЦертификатиУЛ/цУЛ Листед

6. Инсталација

Before beginning installation, ensure the power to your low voltage transformer is turned OFF.

6.1. Уградња сијалице

  1. Carefully remove the top cap of the path light by unscrewing it.
  2. Insert a G4 LED bi-pin bulb (sold separately) into the beryllium copper socket. Ensure the pins are fully seated.
  3. Replace the top cap, screwing it firmly to ensure a moisture-tight seal.
Close-up of the VOLT Stemless Directional Brass Path Light

Слика: Крупни план view of the VOLT Stemless Directional Brass Path Light, showing its compact design.

6.2. Опције монтаже

The VOLT Stemless Directional Brass Path Light offers two primary mounting methods:

6.2.1. Ground Stake Installation

  1. Thread the path light onto the included 9-inch PVC ground stake.
  2. Select a desired location in your landscape. Ensure the location allows for proper drainage and is clear of underground utilities.
  3. Push the ground stake firmly into the soil until the path light is at the desired height and stable. For hard soil, pre-dig a small pilot hole.
  4. Роуте тхе лов волtage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.

6.2.2. Surface Mounting

  1. Identify the desired surface for mounting (e.g., deck, patio edge).
  2. Use the provided mounting hardware to secure the base of the path light to the surface. Pre-drill pilot holes if necessary.
  3. Ensure the fixture is securely fastened and stable.
  4. Роуте тхе лов волtage wire from the path light to your low voltage transformer, ensuring the wire is protected from damage.

6.3. Wiring to Transformer

  • Повежите ниску волtage wire from the path light to the common and 12V terminals on your low voltagе трансформатор.
  • Уверите се да су све везе чврсте и безбедне.
  • Once all fixtures are installed and wired, turn on the power at the transformer.

Видео: Овај видео пружа прегледview of the VOLT Stemless Brass Bronze Directional Path Light, highlighting its features and demonstrating mounting options. It shows how to attach the light to a ground stake and how to prepare it for surface mounting.

7. Упутство за употребу

The VOLT Stemless Directional Brass Path Light operates as part of a low voltage landscape lighting system controlled by a transformer. There are no direct controls on the fixture itself.

  • Once properly installed and connected to a low voltage transformer, the light will turn on and off according to the transformer's settings (e.g., timer, photocell).
  • Ensure the transformer is set to the desired operating schedule.

8. Одржавање

Regular maintenance will help ensure the longevity and optimal performance of your path light.

  • Чишћење: Periodically clean the fixture and lens with a soft, damp cloth to remove dirt, debris, and mineral deposits. Do not use abrasive cleaners.
  • Замена сијалице: If the bulb burns out, ensure the power to the transformer is off before replacing the G4 LED bi-pin bulb. Follow the bulb installation steps in Section 6.1.
  • Инспекција ожичења: Annually inspect wiring for any signs of damage, fraying, or loose connections. Repair or replace as needed.
  • Стабилност учвршћења: Check that the fixture remains securely mounted, whether on a ground stake or surface. Re-secure if loose.

КСНУМКС. Решавање проблема

ПроблемМогући узрокРешење
Светло се не палиNo power to transformer
Слаба веза ожичења
Неисправна сијалица
Transformer timer/photocell setting
Check power supply to transformer
Inspect and tighten all wire connections
Замените сијалицу
Adjust transformer settings
Светло трепериЛоосе булб
Слаба веза ожичења
Некомпатибилна сијалица
Ensure bulb is fully seated
Inspect and tighten all wire connections
Ensure G4 LED bi-pin bulb is compatible with 12V AC systems
Светло је слабоЛов волtagе из трансформатора
Прљаво сочиво
Булб ватtagе прениско
Проверите излазни волумен трансформатораtage
Очистите сочиво
Замените са већим ватомtage G4 LED bi-pin bulb (up to 20W)

10. Гаранција и подршка

The VOLT Stemless Directional Brass Path Light is backed by a Доживотна гаранцијаОва гаранција покрива недостатке у материјалу и изради при нормалној употреби.

For warranty claims, technical assistance, or any questions regarding your product, please contact VOLT Lighting customer support. Refer to the official VOLT Lighting webвеб-сајт или вашу документацију о куповини за актуелне контакт информације.

Произвођач: VOLT осветљење

УПЦ: 842032134007

© 2024 VOLT Lighting. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.