1. Увод
This manual provides detailed instructions for the installation, operation, and maintenance of the YUHANUS Smart Door Access Control System. This kit is designed to provide secure and convenient access management for outswinging doors, integrating a 600lbs magnetic lock with Tuya App and remote control capabilities.
2. Садржај пакета
Проверите да ли су све компоненте наведене у наставку укључене у ваш пакет:
- 600lbs Magnetic Lock with Built-in Alarm Beeper
- Power Supply Controller (Model: SP1203)
- 2 Даљински управљачи
- Stainless Steel Exit Button
- Конектор за напајање
- Mounting Hardware (screws, washers, L-bracket, Z-bracket)
Слика 2.1: Готовоview of the YUHANUS Smart Door Access Control System kit components.
3. Спецификације производа
| Феатуре | Спецификација |
|---|---|
| Magnetic Lock Holding Force | 600 лбс |
| Улаз за напајање | АЦ 100-240В |
| Излаз напајања | ДЦ КСНУМКСВ / КСНУМКСА |
| Timer Adjustment (Power Supply) | 0-15 секунди |
| Фреквенција даљинског управљача | 433 МХз |
| Max Remote Controllers Supported | 30 ком |
| Компатибилност типова врата | Outswinging doors |
| Alarm Beeper | Integrated in magnetic lock |
| Контрола апликација | Туиа Апп |
4. Водич за инсталацију
4.1 Мере предострожности
- Ensure power is disconnected before beginning any installation or wiring.
- Consult a qualified electrician if you are unsure about any wiring procedures.
- Носите одговарајућу заштитну опрему током инсталације.
4.2 Magnetic Lock Installation (Outswinging Door)
For outswinging doors, the magnetic lock body is typically mounted on the door frame, and the armature plate is mounted on the door. Z and L brackets are required for proper alignment.
- Mount the L-Bracket: Secure the L-bracket to the door frame using the provided screws. Ensure it is level and positioned correctly for the magnetic lock body.
- Mount the Magnetic Lock Body: Attach the magnetic lock body to the L-bracket.
- Mount the Z-Bracket: Assemble the Z-bracket components and attach them to the door. The Z-bracket allows the armature plate to align with the magnetic lock body.
- Attach the Armature Plate: Secure the armature plate to the Z-bracket. Ensure the armature plate can pivot slightly to allow for full contact with the magnetic lock face.
- Подесите поравнање: Close the door and adjust the position of the magnetic lock and armature plate to ensure full contact and secure locking.
Image 4.1: Z and L brackets used for mounting the magnetic lock on outswinging doors.
Image 4.2: The 600lbs magnetic lock and its corresponding armature plate.
4.3 Exit Button Installation
Mount the stainless steel exit button in a convenient location near the door on the secure side. Ensure it is easily accessible for exiting personnel.
Image 4.3: The stainless steel push-to-exit button.
4.4 Power Supply Controller Installation
Mount the power supply controller in a secure, dry location, preferably near the door frame but out of direct reach. Ensure proper ventilation.
Image 4.4: The SP1203 power supply controller.
4.5 Дијаграм ожичења
Follow the wiring diagram carefully to connect all components. Incorrect wiring can damage the system or pose a safety risk.
Image 4.5: Detailed wiring diagram for connecting the magnetic lock, exit button, and power supply.
- Connect the magnetic lock to the NC (Normally Closed) and ЦОМ (Common) terminals on the power supply.
- Connect the exit button to the ПУСХ и ГНД (Ground) terminals on the power supply.
- Connect the AC power cable to the N (Neutral) and L (Live) terminals on the power supply.
- Уверите се да су сви прикључци сигурни и изоловани.
5. Упутство за употребу
5.1 Општи рад
Once installed and powered, the magnetic lock will engage, securing the door. To unlock the door:
- Изнутра: Press the stainless steel exit button. The lock will disengage for the set duration (0-15 seconds), allowing the door to open.
- From Outside (Remote): Press the unlock button on the remote controller. The lock will disengage.
- From Outside (Tuya App): Use the Tuya App on your smartphone to remotely unlock the door.
5.2 Интеграција са Туја апликацијом
The power supply controller is compatible with the Tuya Smart App for remote access control.
- Преузми апликацију: Преузмите апликацију Tuya Smart из продавнице апликација на вашем паметном телефону.
- Регистрација/Пријава: Create an account or log in to your existing Tuya account.
- Додај уређај: Follow the in-app instructions to add a new device. The power supply controller should be discoverable when in pairing mode. Refer to the power supply manual for specific pairing mode activation.
- Даљинско откључавање: Once connected, you can use the app to remotely unlock the door from anywhere with an internet connection.
5.3 Упаривање даљинског управљача
The kit includes two pre-paired remote controllers. If you need to add more remotes (up to 30 total) or re-pair existing ones:
- Уђите у режим упаривања: Locate the pairing button or switch on the power supply controller (refer to the power supply diagram for '433 SET'). Press and hold it until an indicator light or sound confirms pairing mode.
- Press Remote Button: While the power supply is in pairing mode, press any button on the remote controller you wish to pair.
- Потврда: The power supply will indicate successful pairing (e.g., a beep or light change).
- Изађите из режима упаривања: The pairing mode will typically time out automatically or can be exited by pressing the pairing button again.
Image 5.1: One of the remote controllers for the access system.
6. Одржавање
Regular maintenance ensures optimal performance and longevity of your access control system.
- Clean Magnetic Lock: Periodically clean the face of the magnetic lock and the armature plate with a soft, dry cloth to ensure full contact and prevent debris buildup.
- Проверите ожичење: Inspect all wiring connections annually for any signs of wear, corrosion, or loose terminals. Tighten as necessary.
- Тест функционалност: Regularly test the exit button, remote controls, and Tuya App functionality to ensure the system is operating correctly.
- Ажурирања софтвера: Keep the Tuya Smart App updated to the latest version for optimal performance and security.
КСНУМКС. Решавање проблема
Погледајте табелу испод за уобичајене проблеме и њихова решења.
| Проблем | Могући узрок | Решење |
|---|---|---|
| Magnetic lock does not engage. | No power; loose wiring; faulty lock. | Check power supply connection; verify all wiring according to diagram; test lock with direct 12V power. |
| Door does not unlock with exit button. | Exit button wiring issue; faulty button. | Check exit button wiring to PUSH and GND terminals; test button continuity. |
| Remote control does not unlock door. | Remote not paired; remote battery low; interference. | Re-pair remote control (Section 5.3); replace remote battery; check for signal interference. |
| Tuya App cannot control the lock. | No internet connection; app not paired; power supply offline. | Ensure stable Wi-Fi connection; re-pair device in Tuya App; check power supply status. |
| Alarm beeper activates unexpectedly. | Door not fully closed/secured; sensor malfunction. | Ensure door is fully closed and armature plate makes full contact; inspect lock for damage. |
8. Безбедносне информације
- This system is designed for low-voltage applications. Do not connect directly to high voltage without the power supply controller.
- Ensure all wiring is done according to local electrical codes and standards.
- Keep the power supply and magnetic lock away from water and excessive moisture.
- Do not attempt to modify or repair the components yourself. Contact support for assistance.
9. Гаранција и подршка
This product comes with a standard manufacturer's warranty. For specific warranty terms, please refer to the product packaging or contact the seller directly. For technical support, troubleshooting assistance, or replacement parts, please contact YUHANUS customer service through the platform of purchase.