1. Увод
This manual provides essential information for the safe and effective operation of your Gedsffati HD08-G 4-in-1 Carbon Monoxide and Natural Gas Detector. This device is designed to monitor carbon monoxide (CO), combustible gases (such as propane and methane), temperature, and humidity in your environment. Please read this manual thoroughly before installation and use, and retain it for future reference.
2. Кључне карактеристике
- 4-у-1 детекција: Integrated sensors for carbon monoxide, combustible gas, temperature, and humidity.
- Дизајн додатка: Compatible with 110V to 220V AC outlets for easy installation.
- Уграђена резервна батерија: 1000 mAh battery provides approximately 10 hours of operation during power outages, allowing for portable use.
- Екран високе дефиниције: 2.1-inch HD screen for clear real-time display of gas concentrations, temperature, and humidity.
- Звучни и визуелни аларми: 85 dB alarm and screen color changes provide immediate alerts for detected hazards.
- Широки опсег детекције: CO detection range of 0-999ppm, with alarm activation above 50ppm.
3. Садржај пакета
Пакет обично укључује:
- 1 x Gedsffati HD08-G 4-in-1 Detector
- 1 к Упутство за употребу
Please inspect the package contents upon receipt to ensure all items are present and undamaged.
4. Безбедносне информације
This detector is a safety device. Please observe the following precautions:
- Do not paint over the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings on the detector.
- Do not install in areas with high humidity, excessive dust, or extreme temperatures.
- Do not install near exhaust vents, furnaces, water heaters, or other combustion appliances.
- Regularly test the detector as described in this manual.
- This device is intended to detect CO and combustible gases. It is not designed to detect smoke or fire.
- In case of an alarm, evacuate the premises immediately and contact emergency services.
5. Подешавање и инсталација
The Gedsffati HD08-G detector is designed for simple plug-and-play installation.
- Изаберите локацију: Select an appropriate location for installation. For CO detection, place the unit at least 5 feet (1.5 meters) from any fuel-burning appliance. For combustible gas detection, place it near potential leak sources, but not directly above them. Avoid corners or areas with poor air circulation.
- Прикључак: Insert the detector directly into a standard 110V-220V AC electrical outlet. The device will power on automatically.
- Почетни самотест: Upon plugging in, the detector will perform an initial self-test. The screen will illuminate, and you may hear a brief audible signal.
- Резервна батерија: The built-in 1000 mAh battery will begin charging once plugged in. This battery provides continuous operation during power outages and allows for portable use.


6. Упутство за употребу
Once plugged in and initialized, the detector continuously monitors the environment.
6.1 Приказ информација

- CO (угљен-моноксид): Displays the current CO concentration in parts per million (PPM).
- ГАС: Indicates the level of combustible gas detected, often represented by a bar graph or numerical value.
- температура: Приказује температуру околине.
- Влажност: Displays the ambient humidity level.
- Индикатор батерије: Приказује тренутни ниво напуњености батерије.
- Brightness/Sound Icons: May indicate current settings for screen brightness and alarm sound.
6.2 Alarm Indications

- When CO concentration exceeds 50ppm, or combustible gas levels exceed the alarm threshold, the detector will activate an audible alarm (85 dB) and the screen display will change, often with flashing indicators or color changes.
- Follow emergency procedures immediately upon alarm activation.
6.3 Функција самотестирања

- To perform a self-test, short press the designated test button (often labeled 'H' or similar). The detector will briefly activate its alarm and display all indicators to confirm proper functioning.
- A green indicator light typically signifies normal operation, while a red light may indicate an alarm or sensor malfunction.
7. Одржавање
Proper maintenance ensures the longevity and reliability of your detector.
- Чишћење: Gently wipe the exterior of the detector with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or spray directly onto the unit. Ensure no liquid enters the sensor openings.
- Редовно тестирање: Perform a self-test at least once a week to confirm the alarm and display are functioning correctly.
- Провера батерије: The built-in backup battery is designed for long-term use. If the detector frequently runs out of power during outages or the battery indicator shows low charge even after prolonged charging, the battery may be degrading. Contact customer support if you suspect a battery issue.
- Избегавајте препреке: Ensure that the detector's ventilation openings are not blocked by dust, debris, or household items.
КСНУМКС. Решавање проблема
If you encounter issues with your detector, refer to the following common problems and solutions:
| Проблем | Могући узрок | Решење |
|---|---|---|
| Детектор се не укључује. | No power from outlet; unit not fully plugged in; backup battery depleted. | Ensure the outlet is functional. Plug the unit firmly into the outlet. Allow time for the backup battery to charge. |
| Alarm sounds frequently without apparent gas. | False alarm due to strong odors (e.g., cleaning products, aerosols); sensor contamination; actual low-level gas presence. | Ventilate the area. Move the detector to a different location temporarily. Clean the detector. If alarms persist, investigate potential gas leaks. |
| Display is blank or shows an error code. | Power issue; sensor malfunction; internal fault. | Check power connection. Perform a self-test. If the issue persists, contact customer support. |
| Alarm is too quiet or not sounding. | Speaker obstruction; unit malfunction. | Ensure speaker is not blocked. Perform a self-test. If the alarm is still not audible, the unit may be faulty and requires replacement. |
If troubleshooting steps do not resolve the issue, please contact Gedsffati customer support for further assistance.
9. Спецификације
The following are the technical specifications for the Gedsffati HD08-G detector:
- Број модела: HD08-G
- Произвођач: Схензхен Хуиду Тецхнологи Цо., Лтд.
- Тежина артикла: 2.12 унци (60 грама)
- Димензије пакета: 4.17 к 2.87 к 2.13 инча
- Улазна снага: 110V-220V AC (Plug-in)
- Резервна батерија: 1000 mAh (Rechargeable, included)
- CO Detection Range: 0-999ппм
- CO Alarm Threshold: >50ппм
- Јачина звука аларма: 85 дБ
- Приказ: 2.1-inch HD Color Screen
- Боја: Бела
10. Гаранција и подршка
Gedsffati products are designed for reliability and performance. Specific warranty details are typically provided with the product packaging or can be found on the official Gedsffati webсајт. Молимо вас да сачувате доказ о куповини за потребе гаранције.
For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided in your product packaging or visit the Gedsffati brand store online.